User manual SILVERCREST SFB 10.1 B2

[. . . ] To access the target device's electronic programme guide (EPG) first press briefly the S button and then the FAV/EPG button . The teletext function is only available in the European TV mode and your reception device must be teletext ready. [. . . ] With the or button select "VOL/MUTE SETUP" and confirm with the OK button . If this device is not equipped with its own volume control the URC will not allow this selection and shows "VOLUME ERROR". For this select in the menu "VOL/MUTE SETUP" with the or button the function "MODE VOL SET" and confirm with the OK button . Now press the device button for the device that is to be excluded from the global volume control. The LCD display shows , , SUCCESS" and the global volume control is deactivated if the URC is working in the operational mode of one of the selected devices. You can again override the settings in the "VOL/MUTE SETUP" menu. For this select in the menu "VOL/MUTE CONF" with the or button the function "VOL/MUTE RESET" and confirm with the OK button . The LCD display prompts you, with CONFIRM RESET, to a confirmation which is done by pressing the OK button . Press the OK button if you want to delete the setting, the displayed "SUCCESS" then confirms the deletion of the device assignment to global volume control. If you select "RESET" and confirm with the OK button you activate the pre-programmed default settings (DVD) for this function. [. . . ] Below and to the right the LCD display shows the current pause length in seconds. With the EXIT button you move back a level in the menu, except during the input of the button commands. [. . . ]