User manual SILVERCREST SEAS 20 A1

[. . . ] Time (Continuous Operation) details how long an appliance may be used without the motor overheating and being damaged. Time has been reached, the appliance must be switched off until the motor has cooled itself down to room temperature (approx. Appliance description q Function “Knife with smooth edge” w Function “Knife with serrated edge” e Function “Scissor sharpening” r Grinder openings for slot-screwdrivers t Grindstone y Function and protective cap u Abrade collector i Switch Safety instructions To avoid potentially fatal electric shocks: • Protect the appliance against moisture. [. . . ] The grindstone t revolves continuously until the switch i is released. Sharpening • First present the blade when the grindstone t is revolving. €¢ Always draw the knife or scissors back, from the blade stop, in an even movement, not in a repetitive back and forth movement – otherwise the result will be an uneven sharpening. €¢ Do not apply any great pressure and always sharpen only clean blades, so as to avoid a premature wearing-out of the grindstone. 2012 16:34 Uhr Seite 46 • Always sharpen knives and scissors so that the blade is at an acute angle to the grindstone (as alluded to in the shape of the opening). €¢ After sharpening, remove any possible grinding remnants that may be on the blade with a moist cloth. If you have selected the setting "Knife with smooth edge" q (Fig. B): • Always sharpen knives with a smooth edge on both sides – for this, left and right side sharpening guides are available. €¢ In the left guide hold the knife inclined to the left, and in the right guide inclined to the right, whilst drawing the blade through. If you have selected the setting "Knife with serrated edge" w (Fig. C): • Sharpen these only on the side with the serration – the draw through direction for the knife is dependant on which side of the blade this is on. If you have selected the setting "Scissor sharpening" e (Fig. For this, open the scissors out and draw both blades, one after the other, through the guide. E): • This is possible in every position of the function cap y. Appropriate to its width, insert the screwdriver through one of the two grinding openings r on the front of the function cap (see fold-out side). 2012 16:34 Uhr Seite 47 Certain edges can possibly be more easily sharpened directly on the grindstone t, without the function cap y: For these cases, the function cap yis removable (Fig. [. . . ] The appliance has been manufactured with care and meticulously examined before delivery. In the event of a warranty claim, please make contact by telephone with our Service Department. The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. [. . . ]