User manual SILVERCREST KH 6778

[. . . ] KH 6778 DVD Player Operating Instructions The Silvercrest KH 6778 DVD Player incorporates a technology for copyright protection that is protected by process claims of certain US patents and/or other intellectual ownership rights of the Macrovision Corporation and other Copyright owners. The use of this technology for copyright protection must be approved by Macrovision Corporation and is exclusively intended for non-commercial use in the private area; all other uses require the explicit approval of the Macrovision Corporation. "Dolby" and the Double-D symbol are registered trade marks of Dolby Laboratories, Inc. The device is protected by the US patents 4. 631. 603, 4. 577. 216, 4. 819. 098, 4. 907. 093. [. . . ] DVD/VCD/S-VCD Silvercrest KH 6778 29 7 Confirm the choice by pressing the "OK" key once. Playback of the selected chapter now commences automatically. Playing audio-CDs 30 Silvercrest KH 6778 12. Playing audio-CDs Proceed in the following manner to play audio-CDs on the DVD Player . . . 2 Ensure that the DVD Player has been switched on and is ready for operation. If the television, DVD player and possibly other connected devices (e. g. an audio component) are operational and switched on and the DVD player is properly connected to the television, you can now see the SilverCrest opening logo on the television: 6 The contents of the audio-CD will then be loaded; this will take several seconds. "Load" will flash on the display on the front of the DVD Player, and "Loading" will be displayed on the television screen. 7 As soon as the contents of the inserted audio-CD has been loaded, the display on the front of the DVD Player will briefly indicate the following . . . · · The total number of titles on the loaded audio-CD The total playing time of the titles on the loaded audioCD 8 Audio-CD playback then commences automatically. 1 2 3 4 "NoDisc" will appear on the television screen and on the display on the front of the DVD Player if there is no disc in the disc drawer of the DVD Player. 1 "CD" 2 The symbols and for playback mode 3 The number of the currently played track 4 Time played hitherto in hours, minutes and seconds 12. 1 Functions while playing an audio-CD 3 Open the disc draw on the front of the DVD Player by pressing the "Open/Close" button once on the front panel of the DVD Player, or on the remote control. "Open" will then appear on the display on the front of the DVD Player and on the television screen. The following DVD Player functions can be used while an audio-CD is being played . . . Stopping playback (Pause) Proceed in the following manner to stop a title on the loaded audio-CD . . . 1 Press once the "Pause/Step" button on the front of the DVD Player or on the remote control while the title is being played. " " Pause will flash on the display on the front of the DVD Player, and " " Pause will be displayed on the television screen. 2 Press the "Play" button once to continue playback of the title. 4 Place an audio-CD, label facing upwards, in the disc drawer. 5 Press once again the "Open/Close" button on the front of the DVD Player or on the remote control to close the disc drawer. "Close" will then appear on the display on the front of the DVD Player and on the television screen while the disc drawer is closing. Silvercrest KH 6778 31 CD Ending playback (Stop) To terminate playback of a title on the loaded audio-CD, press the "Stop" button on the front of the DVD Player or on the remote control once. Direct title selection Instead of the "Skip Forward" and "Skip Backward" buttons, titles can be directly selected on the audio-CD that is being played with the following input procedures: . . . with Resume function If playback of a title on the loaded audio-CD has been terminated by pressing the "Stop" button once, then the DVD Player will automatically store the point at which playback was terminated ("Resume" function"). As soon as the "Play" button on the front of the DVD Player or on the remote control is pressed again, playback of the title will be resumed from the point it was stopped. Entering the title with the numeral buttons Proceed as follows for direct title selection by entering the title number with the numeral buttons . . . 1 Press during title playback, or when playback has been stopped or terminated, the numeral buttons on the remote control that are equivalent to the title number ­ e. g. button "3" for the third title, or consecutively the buttons "1" and "0" for the tenth title. 2 Confirm by pressing the "OK" button on the remote control once. Playback of the title with the entered number starts immediately. CD 32 . . . without Resume function If playback of a title on the loaded audio-CD has been terminated by pressing the "Stop" button once, pressing the "Stop" button a second time will delete the stored point at which playback was interrupted. [. . . ] This method is known as the "Interlace" format. 58 Silvercrest KH 6778 This contrasts with the "Progressive Scan" format where all lines are shown each time, i. e. This increases the over-all quality of the picture so that still pictures and text appear to be significantly sharper. DTS DTS stands for "Digital Theatre System" and defines one of the most common surround-sound formats for DVDs. As is the case with Dolby Digital 5. 1, DTS uses three front and two rear surround-sound channels, as well as a bass channel. PAL is the customary and most wide spread colour television standard in central and western Europe (with the exception of France; see "SECAM"). [. . . ]