User manual SILVERCREST KH 2355

[. . . ] If you wish to connect the appliance to another appliance, read the operating instructions to obtain detailed safety instructions. HF signals can, under circumstances, negatively influence the function of not properly installed or not sufficiently shielded electronic systems in vehicles, e. For further information about your vehicle or its possible ancillaries make contact with the respective manufacturer or their representative. The Bluetooth® Vehicle Hands-Free Phone System KH 2355 is de-signed for use in vehicles with a voltage of 12-24 V. [. . . ] Before you can use the hands-free appliance, you must connect it with a compatible mobile telephone (pairing). A detailed description of how to do this is to be found in the operating instructions for your mobile telephone. To switch the device off, press and hold the multi-function button 4 for about 3 seconds. A long, low signal tone will be heard and the LED condition indicator 6 extinguishes. Position the hands-free appliance and the mobile telephone so that they are not more than 1 metre away from each other. 6 seconds, until after 3 seconds a short signal tone and, after a further 3 seconds, a long and deep signal tone is heard. Enter in the pre-programmed pass code , , 9999" and then confirm it, which couples the appliances with each other. This mobile telephone will now become the standard telephone for the hands-free appliance. You will hear a longer signal tone and the LED status display 6 blinks every 3 seconds. If the coupling is not completed within 2 minutes, the hands-free appliance switches itself off. The LED status display 6 extinguishes and you will hear a long and deep signal tone. You can couple the hands-free appliance with up to eight mobile telephones. If a further mobile telephone is coupled with the hands-free appliance, the coupling information of the first coupled mobile telephone is erased. When the hands-free appliance is switched on, within a few seconds it tries to create a connection with the standard or the last used mobile telephone. Should no connection be possible, the hands-free appliance remains nonetheless recognisable for other mobile telephones. To use the hands-free appliance with a coupled mobile telephone which is not the standard or the last used mobile telephone, a connection must be made over the Bluetooth menu of the mobile telephone. If you wish separate the mobile telephone from the hands-free appliance, for example, to connect it to another Bluetooth appliance: · You need not erase the coupling with the hands-free appliance in the Bluetooth menu to separate the connection. If you wish to re-connect the hands-free appliance with the standard, resp. the last used , mobile telephone: · Check to see that Bluetooth is activated in the mobile telephone, then switch the hands-free appliance on. With the connection of a previously coupled mobile telephone, a pass code need not be entered. You can programme your mobile telephone such that a connection with the mobile telephone automatically takes place when the handsfree appliance is switched on. Further information regarding automatic coupling is to be found in the operating instructions for your mobile telephone. [. . . ] This appliance has been manufactured with care and meticulously examined before delivery. Should a claim need to be made under the warranty, please make contact by telephone with our service department. The warranty covers ONLY claims for material and maufacturing defects, not for wearing or consumable or for damage to fragile components. This product is for private use only and is not intended for commercial applications. [. . . ]