User manual SILVERCREST KH 1907

[. . . ] Should liquids nonetheless permeate into the appliance housing, immediately remove the plug from the wall socket. Never grasp the appliance, the power cable or the power plug with wet hands. To disconnect, always pull the plug itself out of the power socket, do not pull on the power cable. To reduce potential risks in the event of damage to the power cable, arrange for it to be examined and repaired as soon as possible by the manufacturer, by Customer Services or by a similarly qualified person. [. . . ] In the event of a longer separation from mains power, the time must be reprogrammed. When the brewing process is finished you can remove the glass carafe q and serve the coffee. If you do not wish to serve the coffee immediately, allow it to stand in the coffee machine. If you wish to switch the coffee machine off manually, press the button ON/AUTO/OFF 7 twice so that the integrated blue indicator lamp glows constantly. 5 minutes before commencing a further brewing process or filling it with water. Otherwise, the coffee will not have the desired temperature and strength. Open the lid 1 and insert a filter bag (Size 1x4) with folded over sides into the filter holder 2. Subject to taste, you will require approx one level measuring spoon w of coffee powder per cup. A level measuring spoon w approximates to about 6 gr of coffee powder. By use of the button PROG 6 you can programme the coffee machine so that it starts the brewing process at a pre-determined time. First, ALWAYS place coffee powder in the filter bag in the filter holder 2 and water into the water tank 3. If you wish to deactivate the Timer, press the button ON/AUTO/OFF 7 again so that the integrated blue indicator lamp glows constantly. If you do not intend to use the coffee machine for an extended period, stow the power cable in the cable shaft at the rear of the coffee machine and insert the power plug into the designated holes on the cable shaft. The required descaling intervals can, subject to water hardness, be very variable. Your local water supplier will inform you about the water hardness level in your locality. Use only scale removal products that are suitable for coffee makers and pay heed to the instructions for use. 2 cups has passed through and then stop the brewing process by pressing twice on the button ON/AUTO/OFF 7. The integrated blue indicator lamp glows constantly and goes out after approx. Then restart the brewing process and wait until all of the solution has passed through. All of the descaling medium residues will then be removed and you can once again use the coffee machine. [. . . ] This product is for private use only and is not intended for commercial use. If this product has been subjected to improper or inappropriate handling, abuse, or modifications not carried out by one of our authorised service centres, the warranty will be considered void. The warranty period is not extended by repairs effected under warranty. Damages or defects discovered after purchase are to be reported directly after unpacking, at the latest two days after the purchase date. [. . . ]