User manual SILVERCREST KH 528 BLENDER

[. . . ] NEVER insert your hand or fingers in the mixing jug, especially when it is in use. Should you do so, pieces of the foodstuff could be thrown out at high speeds! ⷠDo not insert cutlery items or mixing tools into the mixing jug when the appliance is in use. There is a considerable risk of injury should these make contact with the swiftly rotating cutters! [. . . ] ⷠBefore mounting the mixing jug always check to see that the appliance is switched off or that the power plug has been removed. ⷠBefore removing the mixer jug e, switch the appliance off, remove the power plug and wait for the motor to stop revolving. Selecting operating speeds When the mixer jug e is filled, completely sealed and securely fitted to the motor block u, you can ­ Level 1-3 for fluid or soft foodstuffs, for mixing, blending and stirring ­ Level 3-5 for firmer foodstuffs or for hacking ­ Level Ice Crush/Clean for short, powerful impulse operation, e. So as not to overburden the motor, the switch t does not engage in this position. If filled with more than this, the appliance cannot optimally crush them. Filling and mounting the mixer jug ake the mixer attachment e from the motor unit u and remove the lid w. Fill the mixer attachment e and then press the lid w firmly back onto the mixer attachment e. ensure that the pourer nose on the mixer attachment e is also closed. Insert the filling cap q into the lid opening and secure it by turning it clockwise. Filling when in use Should you wish to insert further foodstuffs during operation, you may ONLY open the filling cap q provided for this purpose. ⷠDo not insert cutlery items or mixing tools into the mixing jug e when the appliance is in use. There is a considerable risk of injury should these make contact with the swiftly rotating cutters r!Afterwards, replace the filling cap q into the lid and secure it by turning it clockwise. When the processing of the foodstuffs is complete: Always first place the switch t into the OFF position ("0") and remove the power plug. Wait until the motor has come to a complete standstill before lifting the mixer jug e straight up. Before starting to clean the liquidiser and its components: · Ensure that the motor is switched off and the power plug removed from the socket. Under no circumstance may the motor block u be submersed in water or other fluids. This could result in you receiving a fatal electric shock and the appliance could be damaged. ⷠNever disassemble the cutters r and never reach into the mixer jug e. Do not use solvents or abrasive cleaners on the plastic surfaces, they could be damaged by them. ­ The best results when blending firm ingredients are achieved by placing small portions one after the other into the mixer jug e instead of inserting a single large portion. ­ When processing firm ingredients, cut them into small pieces (2-3 cm). [. . . ] The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. In the event of a warranty claim, please make contact by telephone with our Service Department. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. [. . . ]