User manual SIEMENS GIGASET C150

[. . . ] s Be inspired The handset at a glance The handset at a glance Talk/ directory key: Top half: N Answer a call N Initiate dialling N Switch from handsfree to "earpiece" mode Bottom half: N Open directory Handsfree key: N Switch from "earpiece" to handsfree mode N Lights up: Handsfree is activated N Flashes: Incoming call Message key Accesses the lists of SMS, network mailbox, caller list/answering machine (C 150 only) Key 1 Select answering machine (C 150 only)/network mailbox (press for approx. 2 seconds) Star key N Ringer on/off Display (display screen) Charge status U fully charged = flashes: battery is almost flat or is charging = flat U Ûu v MENU Current functions and display keys The display keys give you access to the functions shown in the display. End call key and On/Off key N End call N Cancel function N One menu level back (press briefly) N Back to idle status (press for approx. 1 second) N Handset on/off (press for approx. 1 second) Speed dial key Open speed dial list (press briefly) Microphone Recall key Insert a dial pause (hold key down) (press for around 2 seconds) N When texting: Toggles between upper/lower case and digits 1 Table of Contents Table of Contents The handset at a glance . [. . . ] When you send messages, your sender number may be sent without your extension number. Text messages can only be sent and received through ISDN exchanges with the MSN number assigned to your base. 37 SMS (Text Messages) Errors when sending and receiving a text message Errors when sending a text message The following error codes are displayed: Error Code E0 FE FD Description Calling Line Identification permanently withheld (CLIR). Text messages cannot be sent or received if the number of the SMS centre is missing or incorrectly stored. Check that the fixed network number of the SMS centre has been correctly stored. Errors when receiving a text message You cannot receive text messages under the following conditions: N The CLIP service (Calling Line Identification Presentation) is not activated for your phone line, N Call diversion is activated with All Calls (page 20), N Call diversion All Calls is activated for the network mailbox , N The memory (incoming and draft message lists) is full. A message appears on the screen if your phone cannot receive any more text messages for this reason. i Messages with special contents such as images/sound are not supported. 38 SMS (Text Messages) Self-help with error messages Error Message You cannot send messages. Possible Cause You have not requested the CLIP service (Calling Line Identification Presentation). The number of the SMS centre selected as the send centre is not entered or is incorrect. Your phone's memory is full. Remedy Ask your network provider to activate this service. Enter the correct number. You receive a message whose text is incomplete. The message is played back. Messages are only received during the day. Delete some old messages (page 35). The "display call number" serv- Ask your network provider to ice is not activated. The terminal is stored in your Register the terminal with the SMS provider's database as not service provider (again) for having fixed network SMS SMS reception to get it refunctionality. If your SMS network provider's Register the terminal with the database does not yet know service provider (again) for that your terminal supports SMS reception to get it refixed network SMS functional- assigned in the database. ity, then it will only attempt to deliver messages during the day. 39 Using the answering machine in the C 150 Base Using the answering machine in the C 150 Base The Gigaset C 150 has a built-in answering machine that records calls provided it is activated (default setting). It can be operated: N from the base, N from the handset, N from the remote control. The received date and time of each message is logged if you have previously set this function (page 14). As well as the built-in answering machine, you can also select an answering machine of your network provider (e. g. Deutsche Telekom's network mailbox). Terms Message Announcement mode Answer and record mode Announce only mode Pre-recorded announcement Personal announcement Message that a caller leaves on the answering machine. The caller hears a pre-recorded or personal announcement and may then leave a message. An announcement recorded using your own words. Operating the answering machine from the base You can operate the answering machine using the keys on the base in the idle status. Explanation of keys Adjust volume during message playback: ð = softer; ñ = louder. Skips back to the beginning of the message (press once) or to the previous message (press twice). Playback/Stop Key: Plays back messages from the answering machine or cancels the playback. Skips to the next message (press once) or the next message but one (press twice). [. . . ] of channels Radio frequency range Duplex method Channel grid Bit rate Modulation Language code Transmission power Range Power supply/Base Environmental conditions for operation Dialling modes Recall Dimensions/Base Dimensions/Handset Weight Value is supported is supported 60 duplex channels 1880 -1900 MHz Time multiplex, 10 ms frame length 1728 kHz 1152 kbit/s GFSK 32 kbit/s 10 mW, average power per channel up to 300 m outdoors, up to 50 m indoors 230 V ~/ 50 Hz +5 °C to +45 °C; 20 % to 75 % humidity DTMF (tone dialling)/DP (dial pulsing) 250 ms Gigaset C 100: 129 x 114 x 63 mm (L x W x H) and Gigaset C 150: 132 x 140 x 65 mm (L x W x H) 151 x 55 x 27 mm (L × W × H) Base C 100: 148 g and Base C 150: 224 g; Handset with battery cells: 127 g 73 Appendix Answering machine remote operation (C 150 only) The functions of the keys for operating the answering machine remotely are the same for all telephones, handsets and tone transmitters. This "credit card" shows you how to remote operate the answering machine from an external telephone (e. g. from a pay phone, hotel etc. ) and the meaning of the keys. To begin: PreDial your own telephone number. Control the answering machine with the digit keys Delete Activate the answering machine: Allow phone to ring for around 1 min. [. . . ]