User manual SHOWTEC STAGE MASTER PRO

[. . . ] User Instruction Web site: www. highlite. nl E-mail: info@highlite. nl Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Safety Rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Notice Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Principle Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Step 3 - Master Dimmer Enable/ Disable Use the fader 3 to enable or disable the connection to the master dimmer fader. Step 4 - Shutter Yes/ No Using the fader 4 results in two options: Yes and No. "Yes" indicates Bo level is available for this channel(shutter) when the fixture shuts off, and "No" indicates the channel(not shutter) will not get involved when the fixture shuts off. Step 5 - Bo Level Adjustment Use the fader 5 to set a value between 0 and 255 for this (shutter) channel. Default In Fixture Setup menu, pressing the F12(Default) button allows to make default settings for the fixture, that is, erase this fixture from the library. Press the F10(Ok) button to confirm or the F1 button to exit. Set Default Fixture?Press F1 to Exit 20 Setup Menu Copy From Fixture F1 Fixture Copy Menu F5 F6 Up Down F2 F3 Esc Copy Fixture: 1 Name: to Fixture: 1 F7 Keypad Copy F4 F9 F10 F11 F12 F8 In Fixture Setup menu, press the F10 or F11(Copy From Fix) button to access the Fixture Copy Menu, a new window will appear reminding you how to copy a fixture to replace the existed fixture. First use the F6(Up) or F7(Down) button to select the desired fixture, pressing the F12(Keypad) button also allows you to enter a fixture No. Next, press the F9(Copy) button, a dialog box will appear reminding you whether you are sure or not. Press "Ok" to confirm this setting or the F1 button to exit. Press the F1(Esc) button to go back to the previous menu. 21 Setup Menu Tabset F1 XXXXXX Ch: 5 Channel :1 Table Total Item: 42 F5 1-6 7 - 12 13 - 18 19 - 24 24 - 30 31 - 36 37 - 42 43 - 48 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 000 F2 F3 F4 F6 F7 F8 Esc Next Prev F9 F10 F11 F12 In Fixture Setup menu, press the F9(Tabset) button to access Tabset menu. This menu allows you to preprogram up to 48 tabulating value(0-255), so that you can direct access this values for desired channel effects by pressing the button corresponding to the assignment channel. First, use the fader 1 to select the table total item between 1 and 48(Off indicates this function is disabled). Next use the fader 2 to scroll to the value you want to assign to the flashing frame of the table. Be careful that the next value in the frame should be bigger than its previous value. Press the F9(Esc) button to go back to the previous menu. Save In Fixture setup menu, when you have completed the fixture configuration, be sure to press the F2(Save) button to confirm all the settings before you leaves this menu. If you fail to do so, all the settings you have made will lose. 22 Setup Menu Fixture Patch F1 F2 F3 F4 F9 F10 F11 F12 01 09 17 25 33 41 49 57 02 10 18 26 34 42 50 58 03 11 19 27 35 43 51 59 04 12 20 28 36 44 52 60 05 13 21 29 37 45 53 61 06 14 22 30 38 46 54 62 07 15 23 31 39 47 55 63 08 16 24 32 40 48 56 64 F5 F6 F7 DMX s/ l 1/ 14 Fix. Dw Esc Next Prev Fix: XXXXXX F8 In Setup menu, press the F4(FixPatch) button to access Fixture Patch menu, a new window will appear indicating all the 64 fixtures subjected to this console. In this menu, you will have to assign one of the fixture type previously configured to patch each of 64 fixtures. Press the F3(Next) or F4(Prev) button to scroll to the fixture number (from 01-64), then press the F11(Fix. It will be also indicated the starting channel(DMX s) of the fixture, the number of channels(DMX l) used by the fixture and the sum channels(Tot ch) occupied by all available fixtures. For example: Use F3 or F4 to scroll to number 01, next press F11 or F12 to select XXXXXX. As a result, XXXXXX will be assigned to the first fixture on the console. [. . . ] Press the F1(Esc) button to go back to the previous menu. 50 Edit Show Menu Step Multi Copy F1 Step Multi Copy F5 F6 >> 1 5 9 Up Down F2 F3 F4 Esc Start End In To F7 Keypad Copy F8 F9 F10 F11 F12 In Show Edit Utility Menu, press F11(Copy) to access Step Multi Copy menu. First press F2(Start) to move the forward cursor ">>" in line with Start, use F6(Up), F7(Down) or F12(Keypad) to select the starting step. Press F10(Copy), you will be required to confirm by "Ok" or to exit by the F1 button. In this case, these 5 steps from step 1 to step 5 will be added after the step 9 of this show. [. . . ]