User manual SHARP XLHP550 OPERATION MANUAL

[. . . ] MICRO COMPONENT SYSTEM MODEL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. XL-HP550E Micro Component System consisting of XL-HP550E (main unit), CP-HP550E (front speakers) and GBOXS0111AWM1 (surround speakers). XL-HP550E OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/support. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0101 XLHP550E(FRONT) 1 2002. 08. 07, 12:41 XL-HP550E Special notes NOTES FOR USERS IN THE U. K. [. . . ] When selecting number 11 or more, use the "+10" button. XL-HP550E " Repeat play All tracks on up to 3 discs, all tracks on the chosen disc or a programmed sequence can be continuously repeated. To repeat all tracks on the chosen disc: 1 Press one of the DISC SELECT - ( 1 - 3) buttons. To repeat desired tracks: Perform steps 1 - 6 in the "Programmed play" section and then press the / button twice. For example, to choose 30 1 Press the "+10" button three times. If the direct search buttons are pressed whilst the disc is stopped, press the / button to start the desired track on the current disc. A track number higher than the number of tracks on the disc cannot be selected. During random play, direct search is not possible. " Random play The tracks on the disc(s) can be played in random order automatically. To random play all tracks on the chosen disc: 1 Press one of the DISC SELECT - ( 1 - 3) buttons. If you press the button during random play, you can move to the track selected next by the random operation. On the other hand, the button does not allow you to move to the previous track. In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks. ) Caution: After performing repeat or random play, be sure to press the (CD ) button. Otherwise, the disc(s) will play continuously. 19 02/8/7 XL-HP550E(E)2. fm CD Playback XL-HP550E Advanced CD playback (continued) " Programmed play You can choose up to 32 selections for playback in the order you like. To clear the programmed selections: Press the CLEAR button on the remote control whilst the "MEMORY" indicator is flashing. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the CLEAR button on the remote control. The "MEMORY" indicator will disappear and all the programmed contents will be cleared. Adding tracks to the programme: If a programme has been previously stored, the "MEMORY" indicator will be displayed. The new tracks will be stored after the last track of the original programme. To check which tracks are programmed: Whilst the unit is stopped in the programmed play mode, press the or button. Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will not be cleared. During programme operation, random play is not possible. 1 Whilst in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode. 2 CD Playback Press one of the DISC SELECT ( 1 - 3) buttons to select the desired disc. [. . . ] Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Caution: " Do not use chemicals for cleaning (petrol, paint thinner, etc. ). It may cause malfunctions. 31 02/8/7 XL-HP550E(E)3. fm References Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. XL-HP550E Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. [. . . ]