User manual SHARP XL-UH06H OPERATION MANUAL

[. . . ] ENGLISH MODEL XL-UH06H MICRO COMPONENT SYSTEM OPERATION MANUAL XL-UH06H Micro Component System consisting of XL-UH06H (main unit) and CP-UH06H (speaker system). Accessory Please confirm that only the following accessory is included. Volume control The sound level at a given volume setting depends on speaker efficiency, location and various other factors. Listen to music at moderate levels. Remote control x 1 (92L34900016601) Special note Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). For details, please visit http://mp3licensing. com MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. 0: 92L87500016602 *=92L875000166024D*| 13E R MW 1 Special notes WARNINGS: ● When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by remote control. [. . . ] Press the “3” button. Press the “0” button. Notes: ● A track number higher than the number of tracks on the disc cannot be selected. To stop playback: Press the button on main unit or remote control. Notes: ● Selecting the repeat function will cancel the random playback. ● If you press the or button during random play, you can move to the track selected next by the random operation. ● In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks. ) ■ Procedure to play back MP3/WMA disc with folder mode off 1 Select the CD function, and load an MP3/WMA disc. After disc is loaded, disc info will be displayed. or ■ Repeat play Repeat play can play one track, all tracks or a programmed sequence continuously. To repeat one track: Press the PLAY MODE button repeatedly until indicator appears. To repeat all tracks: Press the PLAY MODE button repeatedly until indicator appears. To repeat all desired tracks: Perform steps 1 - 6 in “Programmed play” section on page 7 and then press the PLAY MODE button until indicator appears. To cancel repeat play: Press the PLAY MODE button again until indicator disappears. ● During playback, press DISPLAY button to display the folder, then track number. Note: If the track is skipped during playback, it means “Copyright protected WMA file” or “Not supported playback file” is selected. 2 Select desired file to be played back by pressing the 3 Press the ■ Procedure to play back MP3/WMA disc with folder mode on To play back CD-R/RW. 1 Select the CD function, and load an MP3/WMA disc. Press the FOLDER button and the disc info will be displayed. (Folder mode on. ) Total number of folders 2 Press the PRESET/FOLDER ( or ) button to select desired playback folder. Folder number and total tracks in the chosen folder will be displayed interchangeably. E- Listening to a CD or MP3/WMA disc (continued) Adding tracks to the programme: If a programme has been previously stored, the “MEM” indicator will be displayed. The new tracks will be stored after the last track of the previous programme. Folder number or button. Selected track number 3 Select desired file to be played back by pressing the 4 Press the button. Playback will start. ■ Programmed play (MP3/WMA with folder mode on) You can choose up to 32 selections for playback in the order you like. ● During playback, press DISPLAY button to display the Folder, then Track Number. It will appear for about 2 seconds. 1 While in the stop mode, press the FOLDER button. (Folder mode on) ■ Programmed play (CD or MP3/WMA with folder mode off) You can choose up to 32 selections for playback in the order you like. 2 Press the MEMORY button on the remote control to enter the programming save mode. 1 While in the stop mode, press the MEMORY button on the remote control to enter the programming save mode. 3 Press the PRESET/FOLDER ( or ) button to select desired playback folder, then press the button to select desired track. or 2 Press the or button on the remote control to select the desired track. Selected folder number Selected track number 4 Press the MEMORY button to save the track number. Selected track number 3 Press the MEMORY button to save the track number. Up to 32 tracks can be programmed. 6 Press the button to start playback. 7 During programmed playback, press button to stop 4 Repeat steps 2 - 3 for other tracks. [. . . ] If volume level is too low, increase the volume of the connected device. ■ Remote control Symptom Possible cause ● The remote ● Is the AC power lead of the control does not unit plugged in?● Does the remote control sensor receive strong light? Note: To prevent noise interference, place the unit away from the television. ■ Tuner Symptom Possible cause ● The radio makes ● Is the unit placed near the TV unusual noises or computer?Move the aerial away from the AC power lead if it is located nearby. E-11 Troubleshooting chart (continued) ■ USB Symptom Possible cause ● Device cannot be ● Is there any MP3/WMA file detected. file Caution: This operation will erase all data stored in memory including tuner preset, and CD program. ■ Factory reset, clearing all memory 1 Press the ON/STAND-BY button to enter the power stand-by mode. 2 While pressing down the VOLUME + button, press button. [. . . ]