User manual SHARP XL-MP333H

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: q Reorient or relocate the receiving antenna. q Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. q Consult the dealer or an experienced radio/TV technician for help. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] Be sure to place 3" (8 cm) discs in the middle of the disc trays. [MP3] MP3 track indicator [WMA] WMA track indicator 5 To place discs in the trays 2 - 5 1. Slide in the tray with a disc toward the unit. 1 1 Total number of tracks on the disc whose number is flashing. Place a disc in an empty tray. Press the / button to start playback. Disc play indicator " Playback will begin from track 1 on disc 1. After that disc finishes playing, the next disc will automatically play. " After the last track on the fifth disc is played, the CD player stops automatically. " When there is no disc in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a disc. " Due to the structure of the disc information, it takes longer (approximately 20 to 90 seconds) to read a CD-R/RW disc recorded in the MP3 or WMA format than a normal CD. 17 Disc Playback 5" (12 cm) 3" (8 cm) 1 XL-MP333H Listening to a disc (continued) To remove the discs: 1. Various disc functions Function Play Main unit Remote control Operation Press in the stop mode. Stop Press in the playback mode. Pause Disc Playback To specify a tray to open: 1. Remove the disc, then press the OPEN/CLOSE button again. Press in the playback mode. If you press the button in the stop mode, press the / button to start the desired track. Release the button to resume playback. Track up/ Track down Caution: " Do not place two discs in one disc tray. For example, to choose 30 1 Press the "+10" button three times. If the direct search buttons are pressed while the disc is stopped, press the / button to start the desired track on the current disc. Notes: " A track number higher than the number of tracks on the disc cannot be selected. " For CD-R/RW discs recorded in the MP3 or WMA format, you can select the track number but cannot select the folder by pressing the direct search buttons. 20 XL-MP333H !Repeat play You can play up to 5 discs, or programmed tracks continuously. Random play The tracks on the disc(s) can be played in random order automatically. To random play all tracks on up to 5 discs: Press the RANDOM button on the remote control. To repeat desired tracks: To repeat random play: Press the / button during random play. Caution: After performing repeat play, be sure to press the wise, the disc(s) will play continuously. To cancel random play: Press the button. Notes: " Random play will stop automatically when all tracks are played once. (The same track will not be played back twice. ) " If you press the button during random play, you can move to the next track by the random operation. On the other hand, the button does not allow you to move to the previous track. [. . . ] Cleaning the cabinet Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Caution: " Do not use chemicals for cleaning (gasoline, paint thinner, etc. ). It may cause malfunctions. 30 Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. [. . . ]