User manual SHARP XL-MP2

[. . . ] XL-MP2H Micro Component System consisting of XL-MP2H (main unit) and CP-MP2H (speaker system). MICRO COMPONENT SYSTEM MODEL XL-MP2H OPERATION MANUAL SHARP CORPORATION XL-MP2H ENGLISH Special notes WARNINGS When the ON/STAND BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period. To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. [. . . ] (You cannot select the order of the tracks. ) During random play, repeat function is not possible. In random function, playback will stop after all the tracks is played randomly. Caution: After performing repeat, be sure to press the Otherwise, it will play continuously. button. 1 FOLDER 1 WMA MP3 REPEAT CD or MP3/WMA disc Playback Each time press the button, the repeat mode changes in the following order: In case of an audio CD mode: Repeat playback of a single track 1 Repeat playback of all tracks on the disc Repeat playback of folder on the disc when in folder mode Folder Repeat playback is cancelled Note: ( ) When in folder mode, the selected playmode can be used for the files in the selected folder only. Notes: This unit only supports "MPEG-1 Audio Layer-3" format. (Sampling Frequency is 32, 44. 1, 48kHz) "MPEG-2 Audio Layer-3", "MPEG-2. 5 Audio Layer-3" and MP1, MP2 format are not supported. Playback order for MP3 files may differ sometimes depending on the writing software used during file download. For MP3/WMA files, please put ". MP3" ". WMA" extension. The display playback time may not be displayed correctly when playing back a variable bitrate file. WMA meta tag also supports title, artist and album name which are recorded in WMA files. Copyright protected WMA files cannot be played back. Random play (REMOTE CONTROL ONLY) The tracks on the disc(s) can be played in random order automatically. To random play all tracks: Press the RANDOM button on the remote control so that the random indicator light up in the display window. RANDOM FOLDER MP3 RANDOM E-15 XL-MP2H ENGLISH Programmed play 1 Whilst in the stop mode, press the MEMORY/DISP button to enter the programming save mode. MEMORY TRACK CD To cancel the programmed play mode: During programmed stop mode, press the MEMORY/DISP button and press the button or STOP button on the remote control. The display will show "CLEAR" and all the programmed contents will be cleared. Notes: If the disc lid is opened, the programmed sequence will be cancelled. The programme will automatically cancelled if you press the ON/ STAND-BY button to enter the stand-by mode or change the function from CD to another. During the programme operation, press the RANDOM button will automatically cancelled the programme. CD STOP PRESET 2 Press the direct search buttons on the remote control to select the desired tracks. MEMORY TRACK CD You can also select a track by pressing the button. or 1 2 3 4 MEMORY/ DISP 3 Press the MEMORY/DISP button to save the track number. MEMORY TRACK CD 5 6 7 8 9 0 +10 4 5 Repeat steps 2 ­ 3 for other tracks. Press the CD / button to start playback. E-16 CD or MP3/WMA disc Playback XL-MP2H Advanced CD or MP3/WMA disc playback (continued) Programmed play (Folder mode) ENGLISH 4 5 1 Whilst in the stop mode, press the MEMORY/DISP button to enter the programming save mode. MEMORY MP3 Repeat steps 2 ­ 3 for other folder/tracks. Press the CD / button to start playback. CD or MP3/WMA disc Playback 2 Press the TUNING/FOLDER ( or ) button on the remote control to select the desired folder. MEMORY FOLDER MP3 To cancel the programmed play mode: During programmed stop mode, press the MEMORY/DISP button and press the button or STOP button on the remote control. The display will show "CLEAR" and all the programmed contents will be cleared. Notes: If the disc lid is opened, the programmed sequence will be cancelled. The programme will automatically cancelled if you press the ON/ STAND-BY button to enter the stand-by mode or change the function from CD to another. [. . . ] Timer playback setting End time Desired time Timer playback start time Sleep timer setting 90 minutes Sleep operation will automatically stop. E-27 Troubleshooting chart Many potential problems can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. XL-MP2H Tuner Symptom The radio makes unusual noises continuously. Move the aerial away from the AC power lead if it's located nearby. ENGLISH General Symptom The clock is not set to the correct time. (Refer to page 11) Set the unit to the power standby mode and then turn it back on. [. . . ]