User manual SHARP XG-PH80X-N

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP XG-PH80X-N. We hope that this SHARP XG-PH80X-N user guide will be useful to you.


SHARP XG-PH80X-N : Download the complete user guide (1897 Ko)

You may also download the following manuals related to this product:

   SHARP XG-PH80X-N (11904 ko)
   SHARP XG-PH80X-N (2591 ko)
   SHARP XG-PH80X-N (3138 ko)
   SHARP XG-PH80X-N (3066 ko)
   SHARP XG-PH80X-N (3074 ko)
   SHARP XG-PH80X-N (2617 ko)
   SHARP XG-PH80X-N (11888 ko)
   SHARP XG-PH80X-N (11888 ko)
   SHARP XG-PH80X-N (10950 ko)
   SHARP XG-PH80X-N (12491 ko)
   SHARP XG-PH80X-N (11883 ko)
   SHARP XG-PH80X-N (11829 ko)
   SHARP XG-PH80X-N (11612 ko)
   SHARP XG-PH80X-N (11829 ko)
   SHARP XG-PH80X-N (11612 ko)
   SHARP XG-PH80X-N (3167 ko)
   SHARP XG-PH80X-N (10950 ko)
   SHARP XG-PH80X-N SETUP GUIDE (3074 ko)
   SHARP XG-PH80X-N SETUP GUIDE (2617 ko)
   SHARP XG-PH80X-N SETUP GUIDE (2591 ko)
   SHARP XG-PH80X-N SETUP GUIDE (3066 ko)
   SHARP XG-PH80X-N INSTALLATION (2604 ko)
   SHARP XG-PH80X-N (10923 ko)
   SHARP XG-PH80X-N (10923 ko)

Manual abstract: user guide SHARP XG-PH80X-N

Detailed instructions for use are in the User's Guide.

[. . . ] DATA PROJECTOR MODEL XG-PH80W-N XG-PH80X-N SETUP MANUAL Setting up the Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Screen Size and Projection Distance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connecting Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 RS-232C Specifications and Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Setting up the Projector Network Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 1. Connecting the Projector to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting an IP Address for the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up a Network Connection for the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Please consult your network administrator for assistance with these settings. You can make network settings both on the projector and on the computer. The following procedure is for making settings on the computer. Network settings on the computer 1. Connecting the projector to a computer Connect a LAN cable (Category 5, cross-over type) between the computer and projector. LAN cable (commercially available) Page 19 2. Setting an IP address for the computer Adjust the IP settings of the computer to enable one-to-one communications with the projector. Temporarily change the computer's IP address. Pages 20, 21 3. Setting up a network connection for the projector Adjust the projector network settings to conform to your network. Use Internet Explorer (version 6. 0 or later) to make various projector settings. Pages 22, 23 · Microsoft®, Windows® and Windows Vista®are registered trademarks of Microsoft Corporation in the United States and/or other countries. · PJLink is a registered trademark or an application trademark in Japan, the United States, Canada, E. U. , China and/or other countries/regions. · All other company or product names are trademarks or registered trademarks of their respective companies. -18 Setting up the Projector Network Environment 1. Connecting the Projector to a Computer Establishing a one-to-one connection from the projector to a computer. Using a commercially available LAN cable (UTP cable, Category 5, cross-over type) you can configure the projector via the computer. 1 Disconnect the computer's LAN cable from the existing network. A LAN cable being connected to the network 2 Connect a commercially available LAN cable (UTP cable, Category 5, cross-over type) to the projector's LAN terminal and connect the other end of the cable to the computer's LAN terminal. LAN cable (cross-over type, commercially available) 3 Plug the power cord into the AC socket of the projector. 4 Turn on the computer. ON Info Confirm that the LINK LED on the rear of the projector illuminates. If the LINK LED does not illuminate, check the following: · The LAN cable is properly connected. · The power switches of both the projector and the computer are on. This completes the connection. Setting an IP Address for the Computer". -19 Setting up the Projector Network Environment 2. Setting an IP Address for the Computer The following describes how to make settings in Windows Vista®. 1 2 Log on the network using the administrator's account for the computer. Click "start", and click "Control Panel". 2 1 3 Click "View network status and tasks" of "Network and Internet", and click "View status" in the new window. · This manual uses examples to explain the operations in Category View. If you are using Classic View, double-click "Network and Sharing Center". 1 XXXXXXXXX 2 4 Click "Properties". · When the user account control display is displayed, click "Continue". 1 -20 Setting up the Projector Network Environment 5 Click "Internet Protocol Version 4 (TCP/IPv4)", and click the "Properties" button. 1 2 6 Confirm or change an IP address for the setup computer. 1 Confirm and note the current IP address, Subnet mask and Default gateway. Make sure to note the current IP address, Subnet mask and Default gateway as you will be required to reset them later. 2 Set temporarily as follows: IP address: 192. 168. 150. 3 Subnet mask: 255. 255. 255. 0 Default gateway: (Do not input any values. ) Note · The factory default settings for the projector are as follows: DHCP Client: OFF IP address: 192. 168. 150. 2 Subnet mask: 255. 255. 255. 0 Default gateway: 0. 0. 0. 0 7 After setting, click the "OK" button, and then restart the computer. After confirming or setting, proceed to "3. Setting up a Network Connection for the Projector". -21 Setting up the Projector Network Environment 3. Setting up a Network Connection for the Projector Settings for such items as the projector's IP address and subnet mask are compatible with the existing network. (See page 54 of the projector's operation manual for setting. ) DHCP Client: Off IP Address: 192. 168. 150. 002 Subnet Mask: 255. 255. 255. 000 1 Start Internet Explorer (version 6. 0 or later) on the computer, and enter "http://192. 168. 150. 2/system. [. . . ] Check that the power supply is turned on for the network device such as a hub between the projector and a computer. Check the network settings for the computer and the projector Check the following network settings for the projector. · IP Address Check that the IP address for the projector is not duplicated on the network. · Subnet Mask When the gateway setting for the projector is "0. 0. 0. 0" (Not Used), or the gateway setting for the projector and the default gateway setting for the computer are the same: · The subnet masks for the projector and the computer should be the same. · The IP address parts shown by the subnet mask for the projector and the computer should be the same. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP XG-PH80X-N




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP XG-PH80X-N will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.