User manual SHARP VC-H851S

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP VC-H851S. We hope that this SHARP VC-H851S user guide will be useful to you.


SHARP VC-H851S : Download the complete user guide (992 Ko)

You may also download the following manuals related to this product:

   SHARP VC-H851S (1211 ko)
   SHARP VC-H851S (1260 ko)
   SHARP VC-H851S (1117 ko)
   SHARP VC-H851S (1117 ko)

Manual abstract: user guide SHARP VC-H851S

Detailed instructions for use are in the User's Guide.

[. . . ] ⷠThe dew sensor may take a few minutes to detect moisture. Accordingly, when the VCR is first hooked up or when the power cord is plugged into the socket again, wait about 30 minutes and confirm that the DEW indicator has not lit before attempting to operate the unit. Air vents are provided in the VCR cabinet to prevent excessive temperatures inside the unit. Do not place your VCR in closed spaces, cover it, or otherwise block the vents. [. . . ] ~ Insert the cassette you wish to play into the cassette compartment and press the PLAY button (see FULL AUTO PLAY FUNCTION on page 19). To advance or rewind the tape at much higher speed, first select Stop mode with the STOP button, then select Fast-Forward or Rewind mode with the FF or REW button. When the end of the tape is reached, the VCR automatically rewinds it to the beginning and ejects the cassette. ⷠIf an NTSC tape or a PAL or MESECAM tape recorded in LP mode is played back in Still Picture, Frame Advance, Slow Motion, Double Speed, or Video Search mode, the top of the picture will be distorted, but this does indicate a VCR malfunction. ⷠTo save power, the VCR will automatically exit Shuttle mode if the Shuttle dial is not used for morethan one minute. This function makes the picture on the dubbed tape closer to the original. This VCR allows you to view NTSC~format tapes on your PAL-compatible TV receiver, as well as on an NTSC-compatible or multi-standard TV set. NOTES: It is advisable that this VCR be used, as a rule, with an NTSC-compatible TV set or with a multistandard TV receiver with NTSC 3. While the VCR is usable with a PAL-compatible TV receiver as well, please note the following restrictions: The vertical raster size is slightly smaller than normal. ⷠIf the PAL TV lacks a V-HOLD control, you cannot view NTSC video programmes because the vertical synchronization will remain "out. " If your PAL TV has a V-HOLD control, you can enjoy NTSC videos by stabilizing the vertical sync. nOTE: · Whenyou wishto play a tape with its erasure prevention tab unremoved (or removed but covered up with tape), load the cassette (theVCR will automatically turn on), and pressthe PLAY button. How to Use VISS ADD Play back the tape, watch the picture and listen to the sound until you locate the place where you wish to add the VISS signal, then press the PAUSE/STILL button. frpYifsstf1e~~REWoutforn6peifdrrn-- aHelierseVidetrSearchfdraobtJt-1 second (approx. 3 to 4 seconds of playing time), then immediately press the PAUSE/STILL button to freeze the picture. When "VISS ADD" disappears from the OSO, registration of the VISS signal is complete. How to Use VISS ERASE Find the iocation of the VISS signal you want to erase by using the OPSS function (see page 27). --~ Press the ~ FF button to carry out Forward Video Search for about 1 second (approx. 5 seconds of playing time), then immediately press the PAUSE/STILL button to freeze the picture. Then, the VCR will automatically enter playback mode, and, after 4 to 5 seconds of playback, it will take about 10 seconds to erase the VISS signal. VISS ERASE will disappear from the OSD when VISS ERASE has been completed. O The VI SS ADD function can not be used on cassettes which have the erasure prevention tab broken off, or on unrecorded portions of a tape. [. . . ] ⷠPress the ALL CLEAR button on the VCR's concealed subpanel (this method should not be used too frequently). If the VCR's ALL CLEAR button is used to clear child lock, the real-time clock, timer, and OSD memories will also be cleared. ⷠIf the VCR is unplugged from its outlet, the child lock will remain effective for as long as the battery backup is effective (20 minutes minimum). Make sure the counter is displayed on the fluorescent rnultifunction display', then press the CLEAR button on the VCR or the remote control. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP VC-H851S




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP VC-H851S will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.