Detailed instructions for use are in the User's Guide.
[. . . ] Installation Sending Faxes Receiving Faxes Making Copies Answering Machine Connection Special Functions Printing Lists Maintenance Troubleshooting
IMPORTANT
PLEASE KEEP THE EXTERNAL & INTERNAL PACKAGING SAFE.
PLEASE DO NOT THROW IT AWAY.
IN THE UNLIKELY EVENT OF A HARDWARE FAILURE, OUR REPAIR CENTRE WILL ASK YOU TO PUT YOUR SHARP FACSIMILE IN THIS BOX.
THANK YOU FOR YOUR ASSISTANCE.
MAINS PLUG WIRING INSTRUCTIONS
This equipment is fitted with a moulded type mains plug which incorporates a detachable fuse cover, under no circumstances should the plug be used without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type observing the wiring code below. DANGER: The fuse from the cut-off plug should be removed and the plug should be disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted into a socket outlet as a serious electric shock may occur. [. . . ] 2 rings Fax reception
Changing the number of rings
If desired, you can change the number of rings on which the fax machine answers incoming calls in FAX and TEL/FAX mode. Any number from 2 to 5 can be selected.
1
42
Press
FUNCTION
once and
once.
Display:
OPTION SETTING
Using TEL Mode
2 3 4
Press
once.
NUMBER OF RING
Press
once.
ENTER (2-5) (2)
FAX REMOTE #
Example: 3 rings
3
5
Press
STOP
to return to the date and time display.
Using TEL Mode
To select TEL mode, press
RESOLUTION/ RECEPTION MODE
until the arrow
in the display points to TEL.
RESOLUTION/ RECEPTION MODE
TEL FAX
TEL/FAX A. M.
When the reception mode is set to TEL, you must answer all calls by picking up the fax machine's handset or an extension phone connected to the same line.
43
3. Receiving Faxes
Enter the desired number of rings (any number from 2 to 5).
The display briefly shows your selection, then:
Using TEL Mode
Answering with the fax's handset
1
When the fax machine rings, pick up the handset.
2
If you hear a fax tone, wait until the display shows RECEIVING and then replace the handset.
Beep
RECEIVING
Note: If you have set the Fax Signal Receive setting (page 46) to NO, press
START/MEMORY
to begin reception.
3
If the other party first speaks with you and then wants to send a fax, press START/MEMORY after speaking. (Press before the sender presses their Start key. )
START/MEMORY
RECEIVING
· When RECEIVING appears in the
display, hang up.
Answering on an extension phone
1
Answer the extension phone when it rings.
44
Using TEL Mode
2
If you hear a soft fax tone, wait until your fax responds (the extension phone will go dead), then hang up.
Beep
Phone goes dead
3
If the fax doesn't respond, or if the other party first talks to you and then wants to send a fax, press 5 once and twice on the extension phone (only on a tone dial phone). Hang up.
· The above step is necessary if you have set the Fax Signal Receive setting
(see below) to NO.
· Your fax will not accept the signal to begin reception (5**) if a document is
loaded in its feeder.
Putting a call on hold
To put the other party on hold during a phone conversation, press HOLD . You can put the handset back in the cradle without breaking the connection. When you are ready to speak with the other party again, pick up the handset. If you did not put the handset back in the cradle, press HOLD again to resume conversation.
45
3. Receiving Faxes
Optional Reception Settings
Optional Reception Settings
Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone after answering a call on your fax or an extension phone. If you use a computer fax modem to send documents on the same line, you must turn this function off in order to prevent your fax from mistakenly attempting to receive documents from the computer fax modem. Follow the steps below to change the setting.
1 2 3 4
Press
FUNCTION
Display:
once and
once.
OPTION SETTING
Press
once and
5 times.
FAX SIGNAL RX
Press
once.
1=YES, 2=NO
Press
1
to turn on the function, or
The display briefly shows your selection, then:
2
to turn it off.
CALLER-ID
5
Press
STOP
to return to the date and time display.
46
Optional Reception Settings
Changing the number for remote fax activation
If desired, you can use a number other than 5 to activate fax reception from an extension telephone. You can select any number from 0 to 9.
Display:
1 2 3 4
Press
FUNCTION
once and
once.
OPTION SETTING
Press
once and
once.
FAX REMOTE #
Press
once.
ENTER (0-9) (5)
Enter the desired number (any number from 0 to 9). Example: 3
The display briefly shows your selection, then:
TRANSACTION
3
5
Press
STOP
to return to the date and time display.
Reception Ratio
The fax has been set at the factory to automatically reduce the size of received documents to fit the size of the printing paper. If desired, you can turn this function off and have received documents printed at full size.
If a document is too long to fit on the printing paper, the remainder will be
printed on a second page. In this case, the cut-off point may occur in the middle of a line.
Automatic reduction may not be possible if the received document is too
large, contains too many fine graphics or images, or is sent at high resolution. In this case, the remainder of the document will be printed on a second page.
47
3. Receiving Faxes
Substitute Reception to Memory
1 2 3 4
Press
FUNCTION
once and
once.
Display:
OPTION SETTING
Press
once and
3 times.
RECEIVE RATIO
Press
once.
1=AUTO, 2=100%
Press 1 to select AUTO, or select 100%.
2
to
The display briefly shows your selection, then:
PRINT CONTRAST
5
Press
STOP
to return to the date and time display.
Substitute Reception to Memory
In situations where printing is not possible, such as when your fax runs out of paper, the imaging film needs replacement, or the paper jams, incoming faxes will be received to memory. When you have received a document in memory, FAX RX IN MEMORY will appear in the display, alternating with ADD PAPER & PRESS START KEY or CHECK FILM / CHECK COVER / CHECK PAPER JAM. When you add paper (and press
START/MEMORY
), replace the imaging film, or clear the jam, the stored
documents will automatically print out. Single and multiple copies (up to 99 per original) can be made.
1
Load the document face down.
· If desired, press
RESOLUTION/ RECEPTION MODE
to set the
resolution and/or contrast. (The default resolution setting for copying is FINE. )
READY TO SEND
If desired, select an enlarge/reduce setting, and/or select the number of copies per original:
· ENLARGE/REDUCE: Press
or
until the desired setting appears
in the display. (The default setting is 100%. ) Example: Press twice
RATIO: 125%
· Number of copies per original: Press the number keys to enter a number
from 1 to 99. [. . . ] This appears if you attempt to search for an auto-dial number when none have been stored. This appears if you forgot to replace the handset after using it to dial and send a fax. Replace the handset or press the STOP key to clear the message.
MEMORY IS FULL/ SEE MANUAL (alternating messages)
MEMORY PRINTING
NEAR END OF FILM/ USE SHARP SUPPLY
NO DATA
OFF HOOK
ON HOOK DIAL The key has been pressed and the fax machine is waiting for you to dial. If overheating frequently occurs, try changing the print contrast setting to LIGHT (see page 16).
77
9. [. . . ]