User manual SHARP SJ-PV50H-G/PV50H-W
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP SJ-PV50H-G/PV50H-W. We hope that this SHARP SJ-PV50H-G/PV50H-W user guide will be useful to you.
Manual abstract: user guide SHARP SJ-PV50H-G/PV50H-W
Detailed instructions for use are in the User's Guide.
[. . . ] SJ-PV50H-G SJ-PV50H-W
Plasmacluster is trademark of SHARP Corporation.
AM PM
Thank you very much for buying this SHARP product. Before using your SHARP refrigerator, please read this operation manual to ensure that you gain the maximum benefit from it. All persons using the cabinet must be thoroughly familiar with its operation and safety features. Keep this operation manual with the refrigerator if you move or if the cabinet changes owners so that whoever uses it can read about the various features and safety rules.
Contents
Page
Features
Plasmacluster ion generator OUT Plasmacluster ion generator IN Low-temperature catalyst
Features
Installation Before using your refrigerator
Warning Caution
Inactivates airborne "mold and fungus" in the kitchen.
Adjusting the clock Items that are often mistaken as malfunctions
In the interior, this generates ions to remove the foul-smells and suppress breeding bacteria.
Refrigerator compartment Freezer compartment Vegetable compartment Ice compartment
Making ice cubes
This removes foul-smells drifting within a refrigerator. [. . . ] in the pockets falling.
Pockets
Mounting Mount the top filter on the filter cover and insert in the top surface of the refrigerator.
Filter cover Top filter
Removable parts
"
" display
Removing Pull up from the bottom to remove.
Pocket
Mounting Insert the pocket to projection on the door.
Removing Pull out the vegetable crisper and remove the crisper by pulling up and further out.
Vegetable crispers and lids
Push near the tab and remove the lid. (Pull hard if tight. ) Push
Mounting Place the lid on the rails and push in. Use with the shorter depth lid for the top and second stair.
Until a click is heard
Place the rollers of the vegetable crisper on the rails and push in.
Vegetable crisper Rail Roller
Lid Lid rail
14
Pull
Removing Pull up the front side and pull out.
Shelf
Mounting Place the back side of the shelf on the rails and insert by fitting the tabs on the front rails.
Accompanying parts become heavy and injury may occur as a result of foods and parts dropping.
Notes Do not remove accompanying parts with foods stored.
se Ca
Three position adjustable shelf
Removing Press in the front section, Pull up to remove.
Food
The front section and the back section.
The compartment lamp cover will become hot. Shelves cannot be removed if some cases if the doors cannot be opened fully (more than 90¡).
Do not leave the refrigerator doors open for a long time.
Mounting
Push in the front section into the back section, Back section
Put in the right and left tabs as shownm, Tabs
Pull the front section.
Front section
Removing Pull up to remove.
Ice case
Chilled case
Removing Pull out to remove.
Mounting Insert the case along the rail and close the door.
Fit on rail
and pull up Removing Pull out to remove. slightly
Freezer cases
Mounting Place the longer case on the left.
Long Short
the Mounting Place the tabs ofpushcase on the rails and in. Freezer case Tab Rail
15
Cleaning the refrigerator
Clean your refrigerator periodically to avoid stubborn dirt build-up.
Cleaning
1 2 3 4 5
Remove the power plug.
Do not insert the power plug for 5 minutes once removed as this will cause burden on the refrigerator.
Remove the shelves and pockets from the cabinet and door. Clean the Magnetic door seal with a toothbrush and warm soapy water.
Inspect the following when completed with cleaning:
Is there any damage on the power cord or plug?(When in doubt, contact your dealer of purchase. )
Clean once a month
Top of refrigerator Wash the top filter and filter cover with water and allow to dry in the shade. The ion effect will also decline when dirty.
Thoroughly wipe off dirt from the filter
mounting section.
Discharge port
Removing accompanying parts (14 15 page)
Shelves, pockets and cases within compartments
Refrigerator body (interior and exterior)
Door packing
Easily dirtied parts
Top filter
Filter cover
Thoroughly clean sides where the right and left doors meet.
Filter mounting section
Drip plate indentation ( section) Thoroughly wipe off accumulated dirt.
Remove dust from the discharge port using a vacuum cleaner. (The light sensor may not work if dirty with oil film, etc. )
Light sensor
Dry wipe the LCD panel.
Wipe after performing key lock. (34 page) Data may change when touching the screen.
AM
16
Notes Do not use polishing powder, benzine, hot water etc. If undiluted detergent is used or soapy water is not wiped off thoroughly, cracking of plastic parts can result. In this case, clean the tray with kitchen detergent (cream-type cleanser, etc. ) as quickly as possible. The tray may become scratched.
Wipe any food oils adhered to plastic components When using chemical rags, be sure to follow the accompanied directions. as they can cause cracking of the plastic surface.
Clean once a year
ÅúEvaporating pan / Evaporating pan cover
Water will be difficult to evaporate when dirty. Removing
1 Hold both sides of the evaporating
pan cover and angling upward. 2 Pull the evaporating pan out.
Evaporating pan
Mounting
1 Put the evaporating pan
on the radiator plate, and then slide it in completely.
2 Fit the pawls of the evaporating pan
cover into the holes of the cabinet, and then push the cover to attach.
Push into main unit holes
2 1 Pull diagonally upward
1 2
Hold level to avoid spilling
Evaporating pan cover
Handle to the front
Tab (right / left)
Å@ Water leakage and abnormal noise may occur when evaporation pan and cover are not properly mounted.
ÅúBack of refrigerator, floor and walls
There may be build-up of dust from convection of air.
1 Turn the right and left adjustable feet until 2 Wipe off dirt.
they are off-ground and move the refrigerator. Remove dust from the holes on the lower section of the back side using a vacuum cleaner.
Dust and soil
Adjustable foot (right and left)
Evaporating pan cover
Wipe off dust from the power plug as well.
17
Cleaning the automatic ice maker (Once a week)
Slime bacteria and fungus can become stubborn once they build up. Clean on a regular basis to prevent slime bacterial and fungus build-up.
1 Wash the water tank (excluding the purifier filter) with water.
Disassembly
Remove the
Disassemble and wash each part using a sponge soaked with neutral detergent (dishwashing detergent). Notes When using bleach, be sure to follow the accompanied directions.
1 water tank cap.
2
Reassembly
Remove the
lever and lid. purifier filter and filter
Filter holder
Mount the tab on one side and press in hard.
to the filter case.
3
Remove the
filter case.
Tab
Purifier filter
3
Mount the
filter case.
Press in both side and remove from the tabs. holder
Remove the
Tab
Filter case
5
Remove the of the lid.
From here
packing
Filter holder
Remove the tabs by placing the filter holder sideways.
4
Mount the
lid.
Tabs
(4 locations)
Thoroughly clean the is easily dirtied.
Tab Hole
packing groove as it
Purifier filter
Pull upward.
5
Close the
water tank cap.
2 Wash the purifier filter with water.
Do not use detergent or bleach.
(Use a soft sponge when using. )
This may lead, the detergent may accumulate within the filter or the active charcoal may become ineffective.
Replacement period of the purifier filter
Replacement is also required when there is fungus, rip or odor on the purifier filter.
Normally, replace the filter every 3 ~ 4 years.
Contact the Sharp Service Center when ordering a purifier filter. [. . . ] When Plasmacluster OUT operation is set to OFF while operating at increasing fan speed, fan speed will return to normal for following operations.
To cancel operation
Select OFF.
28
Illumination
1 Select the "Illumination" mark.
Plasmacluster IN
Operation will start when the power of the refrigerator is turned on.
1 Select the "Plasmacluster IN" mark.
2 Press "CHOOSE/START". 3 Select ON using the dial.
To cancel operation
Select OFF.
Beep
2 Press "CHOOSE/START".
Beep
3
Select OFF using the dial.
To start operation
Select ON.
4 Press "CHOOSE/START".
Notes
Beep
4 Press "CHOOSE/START".
Beep
Setting cannot be performed when Plasmacluster OUT is set to OFF.
(Illumination mark will not be displayed. ) Perform setting after turning the feature ON.
29
Night Mode
Night Mode operation will start by the detection of the light sensor when the area surrounding the refrigerator becomes dark.
Vacation Mode
Use this feature when going on a trip or leaving the house.
What is Night Mode operation?
What is Vacation Mode?
The light sensor detections the brightness of the area surrounding the refrigerator and starts the Night Mode operation by suppressing the operation time of the compressor when the area becomes dark.
About 3% power consumption can be saved in a day. (When 1/3 of the day is detected as nighttime)
1 Select the "Vacation Mode" mark.
Operation time of the compressor is suppressed and defrosting is performed at an optimal cycle. About 10% power consumption can be saved.
1 Select the "Night Mode" mark. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP SJ-PV50H-G/PV50H-W
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP SJ-PV50H-G/PV50H-W will begin.