User manual SHARP SJ-68L-C2

[. . . ] Do not touch the compressor unit, as it can become extremely hot during operation. If the power supply is accidentally disconnected, please wait for at least 5 minutes before re-connecting the power, as back pressure in the compressor may trip the overload relay. Do not use a double adaptor as loss of power could lead to the spoiling of the stored food. If the door is left ajar, the controlled inner temperature will rise, resulting in food spoilage and increase in electricity costs. [. . . ] Do not install the fridge freezer in a damp or wet location as this may cause damage to the insulation and a leak. When installing or moving the fridge freezer, make sure that you do not nip or kink the power cord. Do not use this fridge freezer when the power cord or plug is damaged, or the outlet attachment is loose, as they may cause electric shock or fire. Disconnect from the mains electricity supply by removing the mains plug from the electricity supply socket. Make sure that you leave adequate ventilation space around the fridge freezer to prevent the compressor from overheating and stopping. The refrigeration system behind and inside the fridge freezer contains refrigerant. If this system is punctured it could result in serious damage to your fridge freezer, therefore do not allow any sharp objects to come into contact with the refrigeration system. Should the flexible supply cord be damaged, it must be replaced by service agent approved by SHARP as a special cord is required. Do not place heavy or easily broken objects on top of the fridge freezer. To maximize the shelf life of perishable food products, ensure that the food is of the freshest possible quality. Most dairy products have a use by date on the outer packaging which informs the recommended temperature and shelf life of the product. For larger cuts of meat, fish, or poultry, place to the rear of the shelves. Evenly place the food on the shelves to allow the cooling air to circulate efficiently. Storing hot foods increases the temperature in the unit and increases the risk of food spoilage. â· Do not block the outlet and inlet of the cool air circulating circuit with foods or containers; otherwise the foods will not be evenly cooled throughout the fridge freezer. â· Do not place food directly in front of cold air outlet. â· Food should be properly stored or covered and the air should be removed to seal tightly. Some household cleaning chemicals may affect the inside surfaces and plastic shelves resulting in splitting or cracks occurring. [. . . ] Some household cleaning chemicals may affect the inside surfaces and plastic shelves resulting in splitting or cracks occurring. When cleaning all plastic parts inside this fridge freezer, only use diluted dishwa shing liqu id(soapy water). Make sure that all plastic parts are thoroughly rinsed with water after cleaning. Wash them in warm soapy dishwashing water; rinse in clean water and dry. [. . . ]