User manual SHARP SF-7400

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP SF-7400. We hope that this SHARP SF-7400 user guide will be useful to you.


SHARP SF-7400 : Download the complete user guide (676 Ko)

You may also download the following manuals related to this product:

   SHARP SF-7400 (762 ko)
   SHARP SF-7400 (798 ko)
   SHARP SF-7400 (810 ko)
   SHARP SF-7400 (1989 ko)
   SHARP SF-7400 (762 ko)
   SHARP SF-7400 (798 ko)

Manual abstract: user guide SHARP SF-7400

Detailed instructions for use are in the User's Guide.

[. . . ] When paper runs out while the bypass tray is being used, a blinking : will appear in the copy quantity display. (See page 3-9) NOTE: For convenience of quickly changing paper sizes, additional trays (SF-UB14) are also available. ⷠIf you change to a different size of copy paper, the tray must be adjusted. ⷠWhen adding paper, first remove remaining paper, combine it with the paper to be added and then reload as a single stack. [. . . ] NOTE: SF-2514 only When using the SPF, the number of copies cannot be changed because only one copy per original can be made. The copy quantity display will decrease by 1 each time a copy is made. NOTE: The copier returns to the initial settings a preset amount of time after the first copy is made. Three preset reduction ratios and three preset enlargement ratios can be selected. The zoom function enables copy ratio selection from 64% to 129% in 1% increments. Press the copy ratio selector key and the zoom (L, N) keys to select the desired copy ratio. ⷠWhen a zoom (L or N) key is pressed, the ZOOM indicator will light up and the zoom ratio will be displayed in the copy quantity display for at least one second. Use the tray select (M) key to select either the paper tray or the bypass tray for the feeding of paper. Copy paper in the paper tray is always selected unless paper is fed into the single bypass. The bypass automatically feeds one sheet of standard copy paper and also feeds special papers such as transparency film and labels one sheet at a time. Copy paper measuring from A6 to B4 and in the weight range of 52 to 130 g/m2 can be used in this tray. ⷠOpen and close the document cover to clear the indicator. Location/Position (C) (C) Open the document cover and remove any misfed originals. NOTE: A number may appear in the copy quantity display after a minus sign ("­"), indicating the number of originals that must be returned to the SPF tray. After removing the misfed paper, open and close the front cover and ensure that all the misfeed indicators have gone out. If paper is accidentally torn during removal, be sure to remove all pieces. If a misfeed occurs in the bypass tray, : may blink in the copy quantity display. CAUTION Be sure to open the upper unit slowly and gently, and do not let go of it until it is fully open. If the misfed paper is stuck in the fusing area, lift the fusing unit lever to remove a misfeed in the fusing area (see below). Blinking : If the bypass tray becomes empty during copying or paper has not been fed correctly in the bypass tray, : will blink in the copy quantity display. If copy paper is jammed in the bypass tray, either gently pull out the misfed paper or open the copier and remove it. After resetting paper press the clear (>) key to cancel the blinking : indicator. [. . . ] Open the side cover of the paper feed unit and remove the misfed paper. ⷠBe careful not to tear the misfed paper during removal. Acceptable copy paper (Automatic feed) Weight: 56 to 80 g/m2 Size: A6 to B4 Capacity: Up to 50 sheets, provided the total aggregate thickness does not exceed 5 mm (Single sheet feed) Weight: 52 to 130 g/m2 Size: A4 is the maximum size for paper weighing from 104 to 130 g/m2 Weight Dimensions Power supply Approx. The multi bypass tray automatically feeds up to 50 sheets of standard copy paper and also feeds special papers such as transparency film and labels one sheet at a time. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP SF-7400




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP SF-7400 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.