User manual SHARP SC-Z2000H

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP SC-Z2000H. We hope that this SHARP SC-Z2000H user guide will be useful to you.


SHARP SC-Z2000H : Download the complete user guide (3600 Ko)

You may also download the following manuals related to this product:

   SHARP SC-Z2000H (695 ko)
   SHARP SC-Z2000H (673 ko)

Manual abstract: user guide SHARP SC-Z2000H

Detailed instructions for use are in the User's Guide.

[. . . ] Under no circumstances should the cut-off plug be inserted elsewhere into a 5A socket outlet, as a serious electric shock may occur. To fit an appropriate plug to the mains lead, follow the instructions below: IMPORTANT: The wires in the mains lead are coloured in accordance with the following code: Blue: Neutral Brown: Live As the colours of the wires in the mains lead of this product may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: · The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black. ⷠThe wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red. Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three pin plug. [. . . ] Note: It is not possible to record or set timer for two or more individual events at the same time interval. IMPORTANT: Ensure that the aerial or cable is connected before switching on the TV for the first time installation. ⷠWhen the TV is operated for the first time, installation wizard will guide you through the process. First, language selection screen will be displayed: If you select CABLE option, the following screen will be displayed: Use " " or " " buttons to select your language and press OK button to set selected language and continue. " screen will be displayed , requiring you to set Country , Teletext Language and Scan Encrypted options. For highlighting lines you see, use " " or " " button. You can enter the frequency range manually by using the numeric buttons on the remote control. set Start and Stop Frequency as desired by using numeric buttons on the remote control. After this operation, you can set Search Step as 8000 KHz or 1000 KHz. If you select 1000 KHz, the Tv will perform search process in a detailed way. If you select AERIAL option from the Search Type screen, the television will search for digital terrestrial TV broadcasts. Select Network Channel Scan from the installation menu by using " " or " " and OK buttons. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options. 9' replaces the highlighted character with the characters printed above the button one by one as the button is pressed. You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag a single channel. ⷠSelect the channel that you want to lock and select Lock option. Enter the desired channel number by using the numeric buttons on the remote control. If there is a previously stored channel on that number, a warning screen will be displayed. You can set various channels as favourites so that only the favourite channels are navigated. You can select a broadcast type option from the list by using " " /" " and OK buttons. If the name and time of the programme are not available, then information banner will be displayed with blanks. If the selected channel is locked, you must enter the correct four-digit numeric code to view the channel (default code is 0000). [. . . ] USB Is too Slow: If "USB is too slow" message is displayed on the screen while starting a recording, try restarting the recording. If you still get the same error, it is possible that your USB disk does not meet the speed requirements. The following table is an illustration of some of the typical video display modes. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP SC-Z2000H




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP SC-Z2000H will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.