User manual SHARP SA/RT/RP303H

[. . . ] US and foreign patents licensed from Dolby Laboratories Licensing Corporation. The letters in brackets contained in the model number indicate the color of the product only. Operation and specifications are unaffected. FOR YOUR RECORDS For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located on the bottom of the unit. Model number Serial number Date of purchase Place of purchase Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] 0 If the volume is increased to "VOL 24 or higher, the bass level will be adjusted automatically. (This is done to reduce the distortion in the sound. ) Caution: 0 When the unit is not to be used immediately after a MiniDisc has been inserted, or when you plan to carry the unit, turn off the power or cancel the auto-play function. Otherwise, the auto-play function will be activated and the battery will run down. 0 Since the main unit and the AC adaptor can heat up during use, you should avoid allowing the unit to be in direct contact with your skin for any length of time. When using the unit with a car adaptor: 0 When you switch off the ignition key during playback, the power to this unit will also be turned off. Then, when the ignition key is switched on, playback will star-l from the beginning of the track where playback was halted (Resume auto-play function). However, the power to the unit may not be turned off when the ignition is turned off, depending on the type of car. , 22 H Cue and review 1 Load a MiniDisc and begin playback. 2 Move and hold the shuttle switch at H for audible fast forward, or move and hold the shuttle switch at H1 for audible fast reverse. n APSS (Auto Proaram Search system APSS automatically locates the beginning of any track. 3 Normal playback will resume when the shuttle switch (HI or m) is released. Notes: When the end of the last track is reached during fast forward, the unit will enter the pause mode. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. When the unit is in the all track repeat mode, the search will wrap around from the last track to the first, or vice versa. Depending on the contents recorded on a MiniDisc, some sounds may be skipped while cueing and reviewing. To move to the beginning of the next track: Move the shuttle switch tom during playback. To re-start the track being played: Move the shuttle switch to H1 during playback. \ / 1 2 3 \' I'* Combine (Page 28) Two consecutive tracks can be combined into one track. 0 The numbers assigned to the tracks following the combined tracks will be decreased by one automatically. 1 1 A 2 2 3 3 4 AjBc ;C jB j c Disc/Track name (Page 28) Discs and tracks (up to 255 tracks per disc) can be named. Since track names are displayed when the beginning of each track is located or during playback, you can quickly check the name of each track. < 0 Letters (capital letters/lowercase letters), numbers and symbols can be used. Name/stamp (Page 30) I 0 All of the characters and data on a recorded MD (master MD with tracks and character information) can be transferred onto a recordable MD. 1 26 n Move W Divide 1 Start playing the track you want to divide into two. 2 Press the EDIT button to select "DIVIDE". 1 Play the track to be moved, and press the )I1 button. 0 The unit will enter the pause mode. 2 Press the EDIT button to select "MOVE". To move the fifth track 3 Press the ENTER/SYNC button. 0 To cancel the operation, press the U:OFF button. To divide the fourth track 4 Move the HI REC LEVEL w shuttle switch to select the direction to move. (Checking the movement) 3 Press the ENTER/SYNC button. 0 To cancel the operation, press the U:OFF button. 1 1485+ 03 3 1 (To move it to the third track) (Confirming the split) 4 Press the ENTER/SYNC button again. l The track will be divided into two tracks, and the unit will be paused at the beginning of the second of the two tracks. l The numbers of the tracks which come after the divided track will be increased by one automatically. Notes: When a track that has a name is divided, the two new tracks will have the same name. However, in the TOC FULL condition, the second track may not be named. However, even if the number of assigned tracks has not reached 254, it might not be possible to make any further divisions of tracks. 5 Press the ENTER/SYNC button again. 0 The track will be moved, and the unit will be paused at the beginning of the track. [. . . ] It may cause malfunctions. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There mav be some deviations from these values in individual units. n General Power source: DC 3. 6V: DC 5V: DC 3. 4V: DC 4. 5V: Rechargeable lithium-ion battery x 1 AC adaptor (AC 12OV, 60 Hz) Battery case (commercially available, "AA" size, alkaline battery x 1) Separately available car adaptor, AD-CA20X (for cars with a 12-24V DC negative ground electrical system) Power consumption: Output power: Charging time: Battery life: When using the rechargeable battery (fully charged) included with the unit Continuous recording: Approx. 11. 5 hours 7W (AC adaptor) RMS; 20 mW (10 mW + 10 mW) (0. 2% T. H. D. ) Approx. [. . . ]