User manual SHARP R-28ST DEESPTFRITNLSEDKNOFI

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP R-28ST. We hope that this SHARP R-28ST user guide will be useful to you.


SHARP R-28ST DEESPTFRITNLSEDKNOFI: Download the complete user guide (37697 Ko)

Manual abstract: user guide SHARP R-28STDEESPTFRITNLSEDKNOFI

Detailed instructions for use are in the User's Guide.

[. . . ] GB This operation manual contains important information which you should read carefully before using your microwave oven. Important: There may be a serious risk to health if this operation manual is not followed or if the oven is modified so that it operates with the door open. Support du plateau tournant ACCESSOIRES : Assurez-vous que les accessoires suivants sont bien fournis avec le four : (14) Plateau tournant (15) Support du plateau tournant (16) Entraînement Placez l'entraînement dans l'arbre du moteur du plateau tournant puis placez le support du plateau tournant au centre de la sole de four, afin qu'il puisse tourner librement sur l'entraînement. Plateau tournant et support du plateau tournant Retirez le plateau tournant et le support du plateau tournant du four. [. . . ] Operation of microwave oven may cause interference to your radio or TV reception. Securely connect the plug of the oven to a standard earthed (grounded) household electrical outlet. WARNING: Do not place the oven where heat, moisture or high humidity are generated, (for example, near or above a conventional oven) or near combustible materials (for example, curtains). The oven display will display: “0:00”, an audible signal will sound once. This model has a clock function and the oven uses less than 1, 0 W in stand by mode. Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23. Press the CLOCK SET/ DELAY START button, the minute figure will flash. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be within 0-59. The icon “:” of the digital time will be flashing on the display and the clock indicator will disappear. NOTES: • If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not been set, the display will show "0:00". € To check the time of day during a cooking process, press CLOCK SET/ DELAY START button and the LED will display the time of day for 2-3 seconds. € In the process of clock setting, if the STOP button is pressed, the oven will go back to the former setting. € If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after the power is reinstated. MICROWAVE POWER LEVELS Your oven has 5 power levels and to set the power follow the instruction below: To set the power level • Press the MICROWAVE button once, P 100 will be displayed and at the same time the microwave indicator and high heat indicator will light up on the display. € Rotate the ENTRY dial to change the power level until the oven indicates the desired level. € Press the MICROWAVE button to confirm the setting, enter the cooking time and then press the START/+1min button ( ) to start the oven. € To check the power level during cooking, press the ), the current power MICROWAVE button ( level will be displayed for 4 seconds. The oven will continue to count down although the display will show the power level. LED Display Microwave Power HIGH = 100 % MEDIUM HIGH = 80 % MEDIUM = 50 % MEDIUM LOW = 30 % LOW = 10 % Generally the following recommendations apply: P100 - (HIGH output = 800 W) used for fast cooking or reheating e. P80 - (MEDIUM HIGH output =640 W ) used for longer cooking of dense foods such as roast joints, meat loaf and plated meals, also for sensitive dishes such as sponge cakes. At this reduced setting, the food will cook evenly without over cooking at the sides. [. . . ] Care must be taken as some containers warp, melt or discolour at high temperatures. It should not touch the food and must be pierced to let the steam escape. Do not use plastic or metal ties, as they may melt or catch fire due to the metal ‘arcing’. Always attend the oven when using these materials as overheating may cause fire. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP R-28ST




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP R-28ST will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.