User manual SHARP QT-27H

[. . . ] No objects filled with liquids, such as vases, shall be placed on the apparatus. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Laser Diode Properties Material: AIGaAs Wavelength: 790 nm Emission Duration: continuous Laser Output: max. [. . . ] "MP3" and "WMA" indicator will light up after the unit reads information on an MP3 or WMA disc. Bitrate which is supported by WMA is 64 ~ 160 kbps. ON OFF Volume: Turn the VOLUME control to increase or decrease the volume. Extra bass (X-BASS) Press the X-BASS button to emphasise bass sound. 7 QT-27H Playback 1 2 3 TAPE (STAND-BY) Set the FUNCTION switch to CD, Power "ON" indicator will lights up. Be sure to place 8 cm (3") disc in the middle of the disc spindle. The repeat play mode changes as follows on CD. Programmed play for CD or MP3/WMA disc without folder You can choose up to 20 selections for playback in the order you like. REPEAT 1 REPEAT REPEAT ALL REPEAT ALL 1 Whilst in the stop mode, press the MEMORY button to enter the programming save mode. MEMORY MEMORY WMA WMA NORMAL RANDOM RANDOM 2 Select a track by pressing the button. or MEMORY The repeat play mode changes as follows on MP3/WMA disc. REPEAT 1 REPEAT FOLDER Selected track number REPEAT FOLDER REPEAT FOLDER REPEAT ALL REPEAT ALL FOLDER 3 Press the MEMORY button to save the track number. MEMORY WMA WMA WMA 4 NORMAL FOLDER RANDOM RANDOM FOLDER WMA WMA Repeat steps 2 - 3 for other tracks and programmed number will automatic increase. "_ _ _" indicator will display on LCD after programmed up to 20 tracks. If you make a mistake, the programmed tracks can be cleared by pressing the button twice. Press the / button to start playback. 5 9 QT-27H Programmed play for CD or MP3/WMA disc with folder 1 For MP3/WMA CD with folder, total folder number will be display. To cancel the programmed play mode: Whilst in the stop mode and the "MEMORY" indicator is lit, press the button. The "MEMORY" indicator will disappear and all the programmed contents will be cleared. Notes: When open the CD compartment, the programme is automatically cancelled. (Metal or CrO tapes are not recommended. ) Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. 1 2 3 4 5 Set the FUNCTION switch to TAPE. Load a cassette into the cassette compartment with the side to be played facing up. To advance the tape, press the STOP/EJECT / button, then press the F. FWD button. To rewind, press the STOP/EJECT / button, then press the REWIND button. TAPE (STAND-BY) Tape Playback CD RADIO FUNCTION PAUSE STOP/EJECT F. FWD REWIND PLAY RECORD To interrupt playback: Press the PAUSE button during playback. To stop playback: Press the STOP/EJECT / button. ON / Precautions: Be sure not to press the PLAY and REWIND buttons simultaneously, or the tape will become damaged. Before changing from one tape operation to another, press the STOP/EJECT / button. Do not press the PAUSE button whilst the fast forward or rewind operations are in progress. The F. FWD or REWIND button will not be released when the tape end is reached. Tape play button will automatically released when the end of the tape has been reached. Fast forward or rewind button cannot automatically released when the end of the tape has been reached. [. . . ] If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. QT-27H Cassette deck Symptom Cannot record. If a power failure occurs during playback, the heads remain engaged with the tape. Do not open the compartment with great force. General Symptom When a button is pressed, the unit does not respond. Possible cause Set the unit to the power standby mode and then turn it back on. [. . . ]