User manual SHARP PN-R703

[. . . ] PN-R703 PN-R603 LCD MONITOR OPERATION MANUAL IMPORTANT: To aid reporting in case of loss or theft, please record the product’s model and serial numbers in the space provided. The numbers are located in the rear of the product. Model No. : Serial No. : U. S. A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:  REDUCE THE RISK OF ELECTRIC TO SHOCK, DO NOT REMOVE COVER. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within a triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] WHITE BALANCE, PRESET, USER, COPY TO USER, and GAMMA • When the COLOR MODE is set to VIVID or HIGH ILLUMINANCE, GAMMA can not be adjusted. • STANDBY MODE cannot be set to LOW POWER when SCHEDULE is effective. • When displaying the color pattern, it is possible to adjust certain items of the PICTURE menu. Audio input from the HDMI input terminal is also not output. E 28 Menu Items nDual screen display You can display two screens simultaneously. PIP Main screen Sub screen nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to 5 monitors can be aligned in both the horizontal and vertical directions. (Example) Horizontal direction: 2 monitors Vertical direction: 2 monitors A sub screen is displayed inside a main screen. PbyP Main screen Sub screen A main screen and a sub screen are displayed in a line. Horizontal direction: 3 monitors Vertical direction: 2 monitors PbyP2 Main screen Sub screen Displays a main screen which measures 1280 pixels in the longest direction and a sub screen in a line. * The currently selected input signal is displayed on the main screen. * The following combinations are available for display: DisplayPort - HDMI1 or HDMI2 DisplayPort - D-SUB[RGB] DisplayPort - D-SUB[COMPONENT] DisplayPort - D-SUB[VIDEO] DVI-I - HDMI1 or HDMI2 DVI-I - D-SUB[COMPONENT] DVI-I - D-SUB[VIDEO] TIPS • You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public. • The screen size for dual-screen display is the same as the screen size for single-screen display. The Dot by Dot screen is displayed in NORMAL size except when it is set as the PIP main screen. • When dual-screen display is selected, the SCREEN MOTION function is disabled. • When dual-screen display is selected, the AUTO INPUT CHANGE function is disabled. • When dual-screen display is selected, the screen cannot be enlarged. • When dual-screen display is selected, the INPUT SELECT options cannot be set. • When an interlaced signal (1080i, 480i, video) is input to the sub screen, horizontal lines may flicker. If this happens, display the image on the main screen. Setting procedure Set using MULTI in the MULTI/PIP menu. Set the number of monitors aligned in the horizontal direction in ENLARGE H. Set the number of monitors aligned in the vertical direction in ENLARGE V. Set the section of the separated image to be displayed on each monitor in ENLARGE-POS. 1) Press , 2) Press MENU press . TIPS ENTER , or to select position, then • When Enlarge is used, the SCREEN MOTION function is disabled. • When Enlarge is used, the AUTO INPUT CHANGE function is disabled. [. . . ] 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Function TMDS data 2TMDS data 2+ TMDS data 2/4 shield N. C. DDC clock DDC data Analog Vsync signal TMDS data 1TMDS data 1+ TMDS data 1/3 shield N. C. 16 17 18 19 20 21 22 23 24 Function Hot-plug detection TMDS data 0TMDS data 0+ TMDS data 0/5 shield N. C. 1 2 3 4 5 6 7 8 9 10 Function TMDS data 2+ TMDS data 2 shield TMDS data 2TMDS data 1+ TMDS data 1 shield TMDS data 1TMDS data 0+ TMDS data 0 shield TMDS data 0TMDS clock+ No. [. . . ]