User manual SHARP PG-D3750W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP PG-D3750W. We hope that this SHARP PG-D3750W user guide will be useful to you.


SHARP PG-D3750W : Download the complete user guide (2367 Ko)

You may also download the following manuals related to this product:

   SHARP PG-D3750W (2266 ko)
   SHARP PG-D3750W (2277 ko)
   SHARP PG-D3750W (5210 ko)
   SHARP PG-D3750W (2150 ko)
   SHARP PG-D3750W (2269 ko)
   SHARP PG-D3750W (2159 ko)
   SHARP PG-D3750W (2141 ko)
   SHARP PG-D3750W (2277 ko)
   SHARP PG-D3750W annexe 1 (7905 ko)
   SHARP PG-D3750W ANNEXE 1 (5095 ko)
   SHARP PG-D3750W annexe 1 (7902 ko)
   SHARP PG-D3750W annexe 1 (8369 ko)
   SHARP PG-D3750W annexe 1 (8120 ko)
   SHARP PG-D3750W annexe 1 (8167 ko)
   SHARP PG-D3750W annexe 1 (8017 ko)
   SHARP PG-D3750W ANNEXE 1 (8194 ko)
   SHARP PG-D3750W DATASHEET (501 ko)
   SHARP PG-D3750W SETUP GUIDE (2159 ko)
   SHARP PG-D3750W SETUP GUIDE (2150 ko)
   SHARP PG-D3750W SETUP GUIDE (2277 ko)
   SHARP PG-D3750W SETUP GUIDE (2141 ko)
   SHARP PG-D3750W SETUP GUIDE (2269 ko)
   SHARP PG-D3750W (8384 ko)
   SHARP PG-D3750W (8346 ko)
   SHARP PG-D3750W annexe 2 (2368 ko)
   SHARP PG-D3750W ANNEXE 4 (35 ko)
   SHARP PG-D3750W annexe 1 (8346 ko)
   SHARP PG-D3750W SETUP MANUAL (2368 ko)

Manual abstract: user guide SHARP PG-D3750W

Detailed instructions for use are in the User's Guide.

[. . . ] DATA PROJECTOR MODEL PG-D3750W SETUP MANUAL Connecting Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting up a Network Connection for the Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Quit without Saving Settings ([Q]Quit Unchanged). . . 25 IP Address Setting ([1]IP Address) . . . . . . . . . . . . . . . . . . . . . . . . . 26 Subnet Mask Setting ([2]Subnet Mask) . . . . . . . . . . . . . . . . . . 26 Default Gateway Setting ([3]Default Gateway) . . . . . . . 26 User Name Setting ([4]User Name) . . . . . . . . . . . . . . . . . . . . . . . . 26 Password Setting ([5]Password) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 RS-232C Baud Rate Setting ([6]RS-232C Baud Rate) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Projector Name Setting ([7]Projector Name) . . . . . . . . . . 27 DHCP Client Setting ([8]DHCP Client) . . . . . . . . . . . . . . . . . . . . 27 Disconnecting All Connections ([D]Disconnect All) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Entering ADVANCED SETUP MENU ([A]Advanced Setup). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Setting Auto Logout Time (ADVANCED[1]Auto Logout Time) . . . . . . . . . . . . . . . . 28 Data Port Setting (ADVANCED[2]Data Port) . . . . . . . . . . . 28 Carrying out Network Ping Test (ADVANCED[5]Network Ping Test) . . . . . . . . . . . . . . . 29 Setting of Accept IP Address (ADVANCED [6]Accept IP Addr(1) ­ [8]Accept IP Addr(3)) . . . 29 Accepting All IP Addresses (ADVANCED[9]Accept All IP Addr) . . . . . . . . . . . . . . . 29 Setting of Search Port (ADVANCED[0]Search Port). . . . . . . . . . . . . . . . . . . . . . . . . . 30 Return to Default Settings (ADVANCED[!]Restore Default Setting) . . . . . . . . 30 Return to Main Menu (ADVANCED[Q]Return to Main Menu) . . . . . . . . . . 30 Controlling the Projector via LAN . . . . . . . . . . . . . . . . . . . . . 16 Controlling the Projector Using Internet Explorer (Version 5. 0 or later). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Confirming the Projector Status (Status) . . . . . . . . . . . . . . . . 17 Controlling the Projector (Control) . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Setting and Adjusting the Projector (Settings & Adjustments) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Setting the Security (Network ­ Security) . . . . . . . . . . . . . . . 18 Making General Settings for the Network (Network ­ General) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setting for Sending E-mail when an Error Occurs (Mail ­ Originator Settings) . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Setting Error Items and Destination Addresses to which E-mail is to be Sent when an Error Occurs (Mail ­ Recipient Settings) . . . . . . 20 Setting Error Items and the URL that are to be Displayed when an Error Occurs (Service & Support ­ Access URL) . . . . . . . . . . . . . . . 20 Setting up the Projector Using RS-232C or Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 When Connecting Using RS-232C . . . . . . . . . . . . . . . . . . . . . . . . . 21 When Connecting Using Telnet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 SETUP MENU (Main Menu) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 ADVANCED SETUP MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 View Setting Detail List ([V]View All Setting) . . . . . . . . . . . 24 Set Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Save Settings and Quit ([S]Save & Quit) . . . . . . . . . . . . . . . . . 25 Resetting the Lamp Timer of the Projector via LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This allows you to confirm that the settings for e-mail transmission are properly set. Condition (Always, Lamp, Temp, Fan, Cover) Test The set URL site is test-displayed. This allows you to confirm that the URL site is properly displayed. Note · E-mail Address can be up to 64 characters. · You can input the characters below: a-z, A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, |, }, ~, _, ', . , @, ` (You can input "@" only one time. ) · For details about error items, refer to the projector's operation manual. Example of the display when an error occurs -20 Setting up the Projector Using RS-232C or Telnet Connect the projector to a computer using RS-232C or Telnet, and open the SETUP MENU on the computer to carry out various settings for the projector. When Connecting Using RS-232C 7 Input "setup" and press the "Enter" key. · SETUP MENU will be displayed. 1 2 Launch general purpose terminal emulator. Input settings for the RS-232C port of the terminal emulator as follows. Baud Rate Data Length Parity Bit Stop Bit Flow Control : 9600 bps* : 8 bit : None : 1 bit : None SETUP MENU -----------------------------SETUP MENU---------------------------[1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged setup> Note · User name and password are not set in the factory default settings. · If the user name or password is entered incorrectly three times, SETUP MENU will be quit. * This is the factory default setting. If the value of Baud Rate for the projector has been changed, set Baud Rate here according to the changed value on the projector. 3 4 5 Input "PJS11234" and press the "Enter" key. Input "PJS25678" and press the "Enter" key within 10 seconds. Input the user name and press the "Enter" key. · If a user name has not yet been set, just press the "Enter" key. 6 "Password:" is displayed. Input the password and press the "Enter" key. · If a password has not yet been set, just press the "Enter" key. -21 Setting up the Projector Using RS-232C or Telnet SETUP MENU When Connecting Using Telnet 1 2 Click "Start" from the Windows® desktop and select "Run". (If the IP address of the projector is 192. 168. 150. 2. ) Click the "OK" button. -----------------------------SETUP MENU---------------------------[1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged setup> Note · If the IP address has been changed, be sure to enter the new IP address in step 2. · User name and password are not set in the factory default settings. · If the user name or password is entered incorrectly three times in steps 4 or 5, SETUP MENU will be quit. 3 4 "User Name:" is displayed. Input the user name and press the "Enter" key. · If a user name has not yet been set, just press the "Enter" key. 5 "Password:" is displayed. Input the password and press the "Enter" key. · If a password has not yet been set, just press the "Enter" key. 6 Input "setup" and press the "Enter" key. · SETUP MENU will be displayed. -22 Setting up the Projector Using RS-232C or Telnet SETUP MENU SETUP MENU (Main Menu) ADVANCED SETUP MENU ADVANCED SETUP MENU ********************** ADVANCED SETUP MENU *************************** [1]Auto Logout Time [2]Data Port [5]Network Ping Test [6]Accept IP Addr(1) [7]Accept IP Addr(2) [8]Accept IP Addr(3) [9]Accept All IP Addr [0]Search Port -----------------------------SETUP MENU---------------------------[1]IP Address [2]Subnet Mask [3]Default Gateway [4]User Name [5]Password [6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client [A]Advanced Setup [D]Disconnect All [V]View All Setting [S]Save & Quit [Q]Quit Unchanged setup> [!]Restore Default Setting [Q]Return to Main Menu [1] IP Address IP address settings. (Page 26) [4] User Name (Factory default setting: Not Required) Setting of user name for security protection. (Page 26) [5] Password (Factory default setting: Not Required) Setting of password for security protection. (Page 27) [6] RS-232C Baud Rate (Factory default setting: 9600 bps) Baud rate settings for the RS-232C terminals. (Page 27) [7] Projector Name It is possible to assign a projector name. (Page 25) advanced> [1] Auto Logout Time (Factory default setting: 5 minutes) Setting of time until automatic disconnection of network connection. (Page 28) [2] Data Port (Factory default setting: 10002) Setting the TCP port number used when exchanging data. (Page 28) [5] Network Ping Test It is possible to confirm that a network connection between the projector and a computer etc. (Page 29) [6] Accept IP Addr(1) [7] Accept IP Addr(2) [8] Accept IP Addr(3) [9] Accept All IP Addr (Factory default setting: Accept All) For improved security, it is possible to set up to three IP addresses allowing connection to the projector. [. . . ] (Example) When the IP address is "192. 168. 150. 2" and the subnet mask is "255. 255. 255. 0" for the projector, the IP address for the computer should be "192. 168. 150. X" (X=3-254) and the subnet mask should be "255. 255. 255. 0". · Gateway When the gateway setting for the projector is "0. 0. 0. 0" (Not Used), or the gateway setting for the projector and the default gateway setting for the computer are the same: · The subnets for the projector and the computer should be the same. · The IP address parts shown by the subnet mask for the projector and the computer should be the same. (Example) When the IP address is "192. 168. 150. 2" and the subnet mask is "255. 255. 255. 0" for the projector, the IP address for the computer should be "192. 168. 150. X" (X=3-254) and the subnet mask should be "255. 255. 255. 0". Note · When "DHCP Client" is set to "OFF" on the projector: IP address: 192. 168. 150. 2 Subnet mask: 255. 255. 255. 0 Gateway address: 0. 0. 0. 0 (Not Used) · For network settings for the projector, refer to page 14. -33 Troubleshooting Take the following steps for checking the network settings for the computer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP PG-D3750W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP PG-D3750W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.