User manual SHARP PG-D3550W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP PG-D3550W. We hope that this SHARP PG-D3550W user guide will be useful to you.


SHARP PG-D3550W : Download the complete user guide (2515 Ko)

You may also download the following manuals related to this product:

   SHARP PG-D3550W (2969 ko)
   SHARP PG-D3550W (2530 ko)
   SHARP PG-D3550W (2545 ko)
   SHARP PG-D3550W (2499 ko)
   SHARP PG-D3550W (2666 ko)
   SHARP PG-D3550W (2529 ko)
   SHARP PG-D3550W (587 ko)
   SHARP PG-D3550W annexe 1 (8165 ko)
   SHARP PG-D3550W annexe 2 (594 ko)
   SHARP PG-D3550W annexe 1 (8007 ko)
   SHARP PG-D3550W annexe 2 (590 ko)
   SHARP PG-D3550W annexe 1 (8165 ko)
   SHARP PG-D3550W annexe 2 (589 ko)
   SHARP PG-D3550W annexe 1 (8200 ko)
   SHARP PG-D3550W annexe 2 (584 ko)
   SHARP PG-D3550W annexe 1 (8242 ko)
   SHARP PG-D3550W annexe 2 (589 ko)
   SHARP PG-D3550W annexe 1 (8146 ko)
   SHARP PG-D3550W annexe 2 (586 ko)
   SHARP PG-D3550W ANNEXE 1 (8264 ko)
   SHARP PG-D3550W DATASHEET (502 ko)
   SHARP PG-D3550W SETUP GUIDE (2545 ko)
   SHARP PG-D3550W 3D PROJECTION (584 ko)
   SHARP PG-D3550W 3D PROJECTION (590 ko)
   SHARP PG-D3550W 3D PROJECTION (594 ko)
   SHARP PG-D3550W 3D PROJECTION (589 ko)
   SHARP PG-D3550W 3D PROJECTION (589 ko)
   SHARP PG-D3550W (8287 ko)
   SHARP PG-D3550W annexe 2 (588 ko)
   SHARP PG-D3550W annexe 1 (8287 ko)

Manual abstract: user guide SHARP PG-D3550W

Detailed instructions for use are in the User's Guide.

[. . . ] DATA PROJECTOR MODEL PG-D3550W PG-D3050W PG-D2870W SETUP MANUAL Connecting Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 RS-232C Specifications and Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operating the Projector Using the PJLinkTM Protocol . . . . . . . . . . . . . . . . . . 10 Setting up the Projector Network Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 1 XXXXXXXXX 2 4 Click "Properties". · When the user account control display is displayed, click "Continue". 1 -13 Setting up the Projector Network Environment 5 Click "Internet Protocol Version 4 (TCP/IPv4)", and click the "Properties" button. 1 2 6 Confirm or change an IP address for the setup computer. 1 Confirm and note the current IP address, Subnet mask and Default gateway. Make sure to note the current IP address, Subnet mask and Default gateway as you will be required to reset them later. 2 Set temporarily as follows: IP address: 192. 168. 150. 3 Subnet mask: 255. 255. 255. 0 Default gateway: (Do not input any values. ) Note · The factory default settings for the projector are as follows: DHCP Client: OFF IP address: 192. 168. 150. 2 Subnet mask: 255. 255. 255. 0 Default gateway: 0. 0. 0. 0 7 After setting, click the "OK" button, and then restart the computer. After confirming or setting, proceed to "3. Setting up Network Connection for the Projector". -14 Setting up the Projector Network Environment 3. Setting up a Network Connection for the Projector Settings for such items as the projector's IP address and subnet mask are compatible with the existing network. (See page 55 of the projector's operation manual for setting. ) DHCP Client: Off IP Address: 192. 168. 150. 002 Subnet Mask: 255. 255. 255. 000 1 Start Internet Explorer (version 6. 0 or later) on the computer, and enter "http://192. 168. 150. 2/" in "Address", and then press the "Enter" key. If a user name and a password have not yet been set, just click the "OK" button. · If a user name and a password have been set, input the user name and the password, and click the "OK" button. · If the user name or password is entered incorrectly three times, an error message will be displayed. · When you are using Internet Explorer 7 or later, other setup screen may be displayed. In this case, make the proper adjustments for the setup screen. 2 3 When the screen as shown on the right appears, click "TCP/IP". -15 Setting up the Projector Network Environment 4 The TCP/IP setting screen appears, ready for network settings for the projector. Items Setting example / Remarks New You can set the password to protect Password the TCP/IP setting. DHCP Client IP Address Select "ON" or "OFF" to determine whether to use DHCP Client. You can set this item when "DHCP Client" is set to "OFF". Factory default setting: 192. 168. 150. 2 Enter an IP address appropriate for the network. You can set this item when "DHCP Client" is set to "OFF". Factory default setting: 255. 255. 255. 0 Set the subnet mask to the same as that of the computer and equipment on the network. You can set this item when "DHCP Client" is set to "OFF". Factory default setting: 0. 0. 0. 0 * When not in use, set to "0. 0. 0. 0". Factory default setting: 0. 0. 0. 0 * When not in use, set to "0. 0. 0. 0". Subnet Mask Default Gateway DNS Server Note · Confirm the existing network's segment (IP address group) to avoid setting an IP address that duplicates the IP addresses of other network equipment or computers. If "192. 168. 150. 2" is not used in the network having an IP address of "192. 168. 150. XXX", you don't have to change the projector IP address. · For details about each setting, consult your network administrator. 5 6 Click the "Apply" button. The set values appear. Confirm that the values are set properly, and then click the "Confirm" button. · · · · Close the browser. Change the IP address of the setting computer back to its original address, which you have noted down in Step 6-1 on page 14, and then connect the computer and the projector to the network. -16 Controlling the Projector via LAN After connecting the projector to your network, enter the projector IP address in "Address" on Internet Explorer (version 6. 0 or later) using a computer on the network to start a setup screen that will enable control of the projector via the network. Controlling the Projector Using Internet Explorer Complete connections to external equipment before starting the operation. [. . . ] (Example) When the IP address is "192. 168. 150. 2" and the subnet mask is "255. 255. 255. 0" for the projector, the IP address for the computer should be "192. 168. 150. X" (X=3-254) and the subnet mask should be "255. 255. 255. 0". · Gateway When the gateway setting for the projector is "0. 0. 0. 0" (Not Used), or the gateway setting for the projector and the default gateway setting for the computer are the same: · The subnets for the projector and the computer should be the same. · The IP address parts shown by the subnet mask for the projector and the computer should be the same. (Example) When the IP address is "192. 168. 150. 2" and the subnet mask is "255. 255. 255. 0" for the projector, the IP address for the computer should be "192. 168. 150. X" (X=3-254) and the subnet mask should be "255. 255. 255. 0". Note · When "DHCP Client" is set to "OFF" on the projector: IP address: 192. 168. 150. 2 Subnet mask: 255. 255. 255. 0 Gateway address: 0. 0. 0. 0 (Not Used) · For network settings for the projector, refer to page 15. -24 Troubleshooting Take the following steps for checking the network settings for the computer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP PG-D3550W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP PG-D3550W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.