User manual SHARP PC-GP10 QUICK GUIDE

[. . . ] If any of these items is missing or damaged, notify your dealer immediately. Be sure to save the shipping materials and carton in case you need to ship or store the computer in the future. [. . . ] Attach the included core to your LAN cable to insure compliance with requirements of EMC regulations for computing equipment. Some brochures or supplements may be contained other than the left. Memory Upgrade Tool for installing a memory module (Refer to Appendixes of the provided Operation Manual) 2. Install the battery pack into the computer. 1. Slide the battery stopper on the battery pack to the unlocked position( ). Battery Stopper 3. Connect the computer to AC power. 1. Plug the AC adapter cable to the AC adapter jack on the left side of your computer. Plug the AC power cord into a wall outlet. AC Adapter Jack AC Adapter 3. Insert the battery pack into the computer by matching the notched parts of the battery to the projected parts in the computer and push the battery pack until you hear the clicking sound. To Wall Outlet AC Power Cord Projected Part Notched Part 4. Slide the battery stopper to the locked position( ). · Always use the AC adapter included with the computer or the optional one (may not be available in some countries). · Always hold the AC power cord by its plug when removing it from the wall outlet. You will be able to set up your internet connection once you have completed Windows setup. You can add other names except User1 after you finish the Windows setup. The system restarts. 5. Setup Windows. After completing a self test to detect any problems, Windows Setup Wizard starts. Select an Operating System. This product has a dual-install of both Windows(R) XP Professional and Windows(R) 2000 Professional. You are required to observe the following: (1) You must make a one-time selection between Windows(R) XP Professional and Windows(R) 2000 Professional. (2) After such selection has been made, if the rejected product is then desired, you will need to acquire and pay for such product as a separate transaction. When the setup finishes, set your date and time. [. . . ] You are required to observe the following: (1) You must make a one-time selection between Windows(R) XP Professional and Windows(R) 2000 Professional. (2) After such selection has been made, if the rejected product is then desired, you will need to acquire and pay for such product as a separate transaction. When the setup finishes, set your date and time. [. . . ]