User manual SHARP MD-R2H OPERATION MANUAL

[. . . ] YO <P=001> MINIDISC DECK MODEL MD-R2H OPERATION MANUAL Thank you for purchasing this SHARP product. CONTENTS Page SPECIAL NOTES . . 38 ACCESSORIES Remote control × 1 "AA" size battery (UM/SUM-3, R6, HP-7 or similar) × 2 (for remote control) Analogue connecting cable × 2 Note: Parts and equipment mentioned in this operation manual other than those shown above are not included. MD-R2E SM <P=001> SPECIAL NOTES NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug must be used. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut-off the mains plug and fit an appropriate type. [. . . ] (Page 20) 12 4 0dB OVER 12345 q The track number increases by one. s Recording tracks as a single track (Remote control operation) When making an analogue recording, you can record several pieces of music as a single track, without using the auto marker function. AUTO MARK 1 Press the AUTO MARK button on the remote control whilst the recording is paused. q "A. MARK OFF" will appear. 2 Press the 06 button. q This unit will start recording. Note: q When making digital recordings using a CD player or an MD player, track numbers will be created automatically regardless of the setting of the auto marker function. 1 "A. MARK OFF" will appear. 12 4 0dB OVER 1 19 MD-R2E EDITING We will explain the 5 editing functions with which you can create your own original discs from recorded MiniDiscs. Playback-only MiniDiscs cannot be edited. DIVIDE A track can be divided into two tracks. If two selections were recorded as a single track because there was not enough silent space between the pieces, you can use the DIVIDE function to separate the selections. This feature is also convenient for identifying specific points with one selection so that you can locate those points easily whenever you like. (Page 22) 1 2 3 MOVE The order of the recorded tracks can be changed. (Page 24) 1 2 3 4 A 1 2 B 3 C 4 D 1 A 2 B 3 C 4 D A B C D C A B D COMBINE Two adjacent tracks (for example, the third and fourth tracks) can be combined. If there is a prolonged silent section in the middle of a selection that is recorded, a single piece of music may be recorded as two tracks. If this happens, these two tracks can be combined into a single track. (Page 23) Programme move function This function allows the track numbers to be automatically rearranged in the order specified for programmed playback. (The tracks that are not included in the programmed selections will be put at the end of the new track numbers. ) (Page 24) 1 2 3 4 1 2 3 4 A 1 2 B 3 C D 1 A 2 B 3 C 4 D A B C D C A D B ERASE Tracks you want to erase can be erased one at a time or all at once. (Page 25) TRACK/DISC NAME You can assign titles to recorded tracks and to discs. (Page 26) 1 2 3 4 5 A 1 2 B C 3 4 D E DISC 4 TOTAL 1234567 8 9 10 11 12 13 14 15 16 17 18 A B D E 20 MD-R2E (Continued) s Using the editing function We will show you some examples of how to use the editing functions. You can create a disc of your favourite selections by recording tracks from a variety of input sources such as CDs, tapes, and radio broadcasts. STEP 1 Recording tracks to be edited on an MD Digital recording from a CD Recording a broadcast Analogue recording from tape A B C D D Talk E Live performance STEP 2 Putting the space between tracks in order A B C D D Talk E Live performance The tracks are combined using the combine function. Talk E F G CM H STEP 3 Cutting unnecessary sections Cut using the erase function. Cut using the erase function. G H STEP4 Rearranging tracks in your preferred order A B C D E F The tracks are rearranged using the programme move function. F G STEP 5 Finish by putting names on the disc and tracks (Disc name) (Track name) The editing functions are selected from the edit menu. The functions which can be selected from the edit menu will vary, depending on the state in which an editing operation is started. STEP 1 Edit menu display / STEP 2 Edit menu selection Previous menu Next menu STEP 3 Editing start ENTER Each time the button is pressed, the edit menu will appear. (Move function) Each time the button is pressed, the edit menu will appear. (Track name function) You can edit the selected menus. A different menu may be displayed. Within 10 seconds, perform step 3. To stop editing anytime, press the button. This function Can be selected in the following conditions. ( Disc name Track name Divide Combine Move When stopped The total number of tracks appears )( When stopped Selection of track numbers ) During playback Playback in the pause mode During recording/ in the recording standby mode When entering a programme Programme move Erase All erase 21 MD-R2E (Continued) s DIVIDE ENTER NAME/TOC EDIT 1 Play the track which you want to divide into two, and press the 06 button at the point where you want to divide the track. q The unit will enter the pause mode. 2 Press the NAME/TOC EDIT button, and then select "DIVIDE" using the jog dial. 3 Within 10 seconds, press the ENTER button. 1 12 4 0dB OVER q To cancel the operation, press the s button. 4 Press the ENTER button again. q The track is divided, and the unit is paused at the beginning of the second of the two tracks. q The numbers of the tracks which come after the divided track are automatically increased by one. q When a track which has been given a name is divided, the two new tracks will have the same name and date. [. . . ] q The TOC information on this disc does not meet the MD specifications or it cannot be read. q The TOC information could not be created properly due to a mechanical shock or to scratches on the disc. q Music is not being recorded. q Replace the disc with a recorded disc. Can't COPY Can't EDIT Can't REC DEFECT Din UNLOCK DISC ERR DISC FULL FOCUS ERROR MD ERROR MECHA ERR* NAME FULL NO DISC NOT AUDIO PLAYBACK MD q Replace it with another disc which you can copy from (regular CD). q Press the ON/STAND-BY button to enter the stand-by mode, and press the button. 7 q Shorten the disc or track name. [. . . ]