User manual SHARP MD-MS722H

[. . . ] CAUTION: At full power prolonged listening to a personal stereo may damage the user's hearing. The model is in compliance with the law in case of using it with the SHARP earphones (model number RPHOH0004AWZZ). Q CAUTION Use the portable minidisc recorder only in accordance with the instructions given in this manual and do not attempt to interfere with the interlock switch or make any other adjustment as this may result in exposure to hazardous radiation. It contains dangerous voltages, always remove mains plug from the main outlet socket before any service operation or when not in use for a long period. [. . . ] , , To create your own track numbers You can create your own track numbers at any point. Whilst recording, press the REC button at the point where you want to create track numbers. Z One track number will be added every time the REC button is pressed. Z The BASS button on the remote control can also be used to add track numbers. Numbering restriction If you try to number more than 10 tracks in certain amount of time, "SORRY" will be displayed and the operation will be disabled. In stereo recording In 2 times long recording In 4 times long recording In monaural recording Within 40 seconds Within 80 seconds Within 160 seconds Within 80 seconds You can record several pieces of music as a single track by disabling the auto marker function. Note: When making digital recordings using a CD player or an MiniDisc player, track numbers will be created automatically regardless of the setting of the auto marker function. Track numbers are created automatically during recording via the analogue connection when a silence of 1 second or more is detected (Auto marker function). Selecting tracks manually, the MiniDisc track numbers may not be the same as on the source. Z Track numbers may not be created properly, depending on the connected stereo system. When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function). Use a commercially available LR6, "AA" size alkaline battery. Notes: z Setting the volume level to "0" whilst recording with the rechargeable or an alkaline battery reduces the battery drain. Z This unit can be used with the AC adaptor when the rechargeable or an alkaline battery is in the unit. The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a crowded train. -Hold FunctionIf the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off. To cancel the hold mode Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode. To cancel the hold mode Move the HOLD switch away from the safety position (the opposite direction of the arrow). If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained. , , Beep sound , , Auto play With a MiniDisc inserted, press the MODE/CHRG button for 2 seconds or more. You can eliminate the confirmation sound that beeps when you press a button. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. [. . . ] A track number may be created if there are scratches or dust on the MiniDisc. ) Can't COPY z You tried to record from a copy prohibited MiniDisc. ) Can't READ (*) z The disc data cannot be read because the disc or unit is damaged. (If the recorded sound is not right, retry recording or replace the disc with a recordable one. [. . . ]