User manual SHARP MD-MT90W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP MD-MT90W. We hope that this SHARP MD-MT90W user guide will be useful to you.


SHARP MD-MT90W : Download the complete user guide (2835 Ko)

Manual abstract: user guide SHARP MD-MT90W

Detailed instructions for use are in the User's Guide.

[. . . ] Notes: z Parts and equipment mentioned in this operation manual other than those detailed above are not included. It contains dangerous voltages, always remove mains plug from the main outlet socket before any service operation or when not in use for a long period. Z The AC adaptor supplied with the MD-MT90W must not be used with other equipment. Z To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. [. . . ] (Pause function does not work for approximately 10 seconds after a recording starts. ) When the microphone picks up sound again, recording starts automatically. Notes: z Whilst making a mic recording, do not connect anything to the OPTICAL/LINE IN socket on the portable MD. - When a plug-in-power type microphone is plugged in , the portable MD will provide power for the microphone's operation. - If a different type of microphone is plugged in, it may not operate properly or it may cause the unit to malfunction. Z If the unit starts recording too often from low unwanted noises, set the microphone input to "MIC SYNC L". MIC SYNC H : Recording starts when the unit detects ---24 dB or more (The unit can start recording from quiet sounds). A rechargeable battery other than the one supplied or the optional one (AD-N70BT) cannot be charged. Plug the AC adaptor into the wall socket, and then insert the plug on the other end into the DC IN 5V socket. Z After the rechargeable battery is charged or used, it will get slightly warm. Z When the portable MD is turned on or operating, the battery will not be charged. To charge the battery fully, continue charging for about 2 more hours. Z Charging is completed when " " when you plug in the AC adaptor MODE/CHRG button. Of 5°C - 35°C does not blink and press the state after it is Use a commercially available LR6, "AA" size alkaline battery. Z Do not dip the battery in water, do not dispose of it in a fire, and do not take it apart. Z If the rechargeable battery terminal is dirty, charging may not start. Notes: z Setting the volume level to "0" whilst recording with the rechargeable or an alkaline battery reduces the battery drain. Z This unit can be used with the AC adaptor when the rechargeable or an alkaline battery is in the unit. The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a crowded train. -Hold FunctionIf the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off. To cancel the hold mode Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode. To cancel the hold mode Move the HOLD switch away from the safety position (the opposite direction of the arrow). [. . . ] Z You tried to play back a track that cannot be played with this equipment. Z Since a track number is currently being located or z Wait for a while and try the operation again. TOC FULL z There is no space left for recording character in- z Replace it with another recordable disc. Z A disc which contains data other than music was z A disc which contains non-music data cannot be played. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP MD-MT90W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP MD-MT90W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.