User manual SHARP MD-M11H/E/A/Z

[. . . ] 4-5 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11 Useful Features Advanced Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-27 28-32 33-35 36-37 38-39 DEUTSCH Power Source Using with the Rechargeable Battery . . . . . 15 Advanced Features Preparation Hold Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Long-play recordings can be replayed at double speed, see page 27. 1 Press the MODE button whilst the recording is paused. Appears Useful Features 29 Stereo mode Long-play mode q "MONO" appears whilst in the long-play mode. 2 Start recording. Notes: q When the unit is stopped after a recording has been made in this mode, the recording mode will return to the stereo mode automatically. q If input is from a stereo source, the sounds from the left and right channels will be combined. q Although the monitor sound you hear in the earphones whilst recording is in stereo, recording will be monaural. q MiniDiscs recorded in the monaural long-play mode may not play on other MiniDisc players. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) ­ Advanced Recording ­ Advanced Recording (continued) To start recording from the middle of a track You can erase a portion of a track and make a new recording. q All of the tracks that follow the newly recorded track will be erased. 1 2 During playback, press the 06 button at the point where you want to begin recording. Press the REC button. Useful Features ­ Advanced Recording ­ q To cancel the operation, press the · s / :OFF button. 3 Press the right shuttle switch toward "ENTER/SYNC". q All of the tracks and track names will be erased, following the point where the playback is paused. 4 Press the 06 button. q Recording will start. Note: q To keep a track after the point you want to make a new recording, move the track and then make recording after that point. (See "Editing a Recorded MiniDisc", page 46. ) 30 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Advanced Recording : continued To create your own track numbers You can create your own track numbers at any point. Whilst recording, press the REC button at the point where you want to create track numbers. The track number will be increased by one. q One track number will be created every time the REC Recording tracks as a single track You can record several pieces of music as a single track by disabling the auto marker function. Press the EDIT button. Useful Features 31 button is pressed. q The SOUND button on the remote control can also be used to create track numbers. Note: q When making digital recordings using a CD player or an MiniDisc player, track numbers will be created automatically regardless of the setting of the auto marker function. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) ­ Advanced Recording ­ Advanced Recording (continued) About track numbers 1. Track numbers are created automatically during recording via the analogue connection when a silence of 1 second or more is detected (Auto marker function). A series of tracks can be recorded as one by disabling the auto marker function see page 31. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Total playing time 36 Checking Displays : continued To display the playing time of an individual track Checking the remaining amount of battery level The remaining amount of battery level is shown by the battery indicator ( ) during operation. 1 Useful Features 37 Track number Track name When the battery level is high When the battery level is very low q When the battery is completely discharged, the battery 2 Press the DISP button to display the playing time for that track. Playing time q Each time the right shuttle switch to 5 or 4 is moved, the playing time of the previous or next track will be displayed. indicator will flash. q When the battery has run completely out, "BATT EMPTY (LoBATT)" will appear. Notes: q If you use the battery which you stopped charging half" may appear. q The battery indicator will not correctly display the remaining capacity for approximately 10 seconds after the power has been turned on. q When the AC adaptor or a separately available car adaptor is used, the battery indicator will not be shown. q The number of bars shown in the battery indicator may increase or decrease, depending on the operation being performed. Help Line: 08705 274277 (office hours) Web-site: www. sharp. co. uk/support ­ Checking Displays ­ Whilst in the stop mode, move the right shuttle switch to 5 or 4 to display the track number and track name. How to read the battery indicator Changing Default Settings Whilst in the stop mode . . . 1 ­ Changing Default Settings ­ MENU BEEP ON confirmation sound EL ON display backlight SETTING ITEM BEEP ON* BEEP OFF Beep Silent With a MiniDisc inserted, press the MODE button for 2 seconds or more. "SET UP" will appear. Useful Features q When you release the button, "BEEP ON" or "BEEP OFF" will appear. 2 Move the right shuttle switch to 5 or 4 to display the menu. EL ON 1* EL ON 2 EL OFF A-PLAY ON* A-PLAY OFF AUTO Psave* Psave OFF D. L MODE 1* D. L MODE 2 Turn on Turn on Turn off Setting Cancelled Setting Cancelled Setting keep Cancelled A-PLAY ON auto play AUTO Psave auto power save D. L MODE 1 digital recording level RFRESH ON refresh LIGHT ON LCD edge light 3 4 Press the MODE button to switch items. Press the · s / :OFF button. RFRESH ON* RFRESH OFF LIGHT ON* LIGHT OFF Setting Cancelled Setting Cancelled 38 (*) indicates default setting. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Changing Default Settings Beep sound You can eliminate the confirmation sound that beeps when you press a button. Digital recording level "D. L MODE 1" The digital recording level you set will be kept even after canceling recording. "D. L MODE 2" Every time you cancel recording, the level will return to [ D. L 0dB ]. Display backlight on the remote control "EL ON 1" When any button is pressed, the backlight will remain lit for about 10 seconds. "EL ON 2" When the rechargeable battery, alkaline battery or car adaptor is used, the backlight will remain lit for about 10 seconds. When the battery charger is used and the power is turned on, the backlight will always be lit. [. . . ] Read the operation manual for the stereo system. 52 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) Troubleshooting : continued If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1. Plug the AC adaptor back into the wall socket and reoperate the unit. Maintenance s Cleaning When the unit becomes dirty Clean it with a soft cloth. When the unit is excessively dirty, use a soft cloth dampened in water (external surfaces only). Cleaning will prevent noise. References 53 Moisture condensation When the unit has condensation inside, the disc signals cannot be read, and the unit may not function properly. In the following cases, condensation may form inside the unit. [. . . ]