User manual SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN. We hope that this SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN user guide will be useful to you.


SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL: Download the complete user guide (6561 Ko)

You may also download the following manuals related to this product:

   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6681 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6548 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6600 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6674 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6521 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6743 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6519 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6551 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6636 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6528 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6506 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6564 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6498 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6504 ko)
   SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN OPERATIONMANUAL (6656 ko)

Manual abstract: user guide SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KNOPERATIONMANUAL

Detailed instructions for use are in the User's Guide.

[. . . ] 7 ● ABOUT THE MANUALS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ● CONVENTIONS USED IN THIS MANUAL . . . . . . . 7 DIFFERENCES BETWEEN MODELS. . . . . . . . . . . . . . . 8 1 BEFORE USING THE MACHINE 2 ● ● ● ● ● ● COPY FUNCTIONS PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . 9 ● OPERATION PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 NORMAL COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 USING THE BYPASS TRAY TO COPY A SPECIAL SIZE ORIGINAL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If you select a prohibited combination of settings, a message will appear in the display. 107 FAX FUNCTIONS ● EDITING PROGRAMS If you need to edit a previously stored program, follow these steps. 3 4 5 Select the program that you wish to edit with the [ ] or [ ] key. Edit the program name (see "ENTERING CHARACTERS" (p. 24)). • See step 3 of . • If you do not wish to edit the program name, go to the next step. Select the stored setting that you wish to edit with the [ ] or [ ] key. • See steps 4 of . • If you do not wish to edit the stored settings, press the [BLACK & WHITE START] key and then press the [BACK] key ( ) to exit. ● DELETING PROGRAMS Before deleting a program, print the "Program List" to check the contents. (p. 109) To delete a previously stored program, follow these steps. 3 4 Select the program that you wish to delete with the [ ] or [ ] key. Select "Delete" with the [ ] or [ ] key. 108 FAX FUNCTIONS PRINTING LISTS OF PROGRAMMED INFORMATION AND SETTINGS You can print lists showing programmed information and settings. • Destination Lists: Shows the destinations stored in auto dial numbers in the order of their search characters. • Group List: Shows the destinations stored in each group dial number. • Timer List: Shows timer transmissions and recall transmissions. For other lists that can be printed, refer to "List Print" (p. 181). 1 2 3 Press the [SPECIAL FUNCTION] key ( ). Select "Data List Print" and select "Fax" with the [ ] or [ ] key. Select the list that you wish to print with the [ ] or [ ] key. See the explanation of the lists that can be printed above. INCLUDING SENDER INFORMATION ON FAXES (OWN NUMBER SENDING) This function prints the date, time, your programmed name, your programmed fax number, and the transmitted page number at the top centre of each page that you fax. The following settings can be stored in a program: (1) Address setting (2) Transmission method Normal transmission (p. 85), broadcast transmission (p. 99), polling (p. 100), serial polling (p. 101) (3) Original Size Enter (4) Duplex Scanning (5) Resolution and exposure (6) Own number sending (p. 109) (7) Transmission settings (p. 89) When storing a broadcast transmission or serial polling operation in a program, up to 200 destination fax numbers can be stored. Note • A program differs from a timer transmission (p. 98) in that it is not cleared from memory after transmission takes place. A program thus allows you to repeatedly perform the same type of transmission. Note, however, that programs do not allow you to establish a timer setting for transmission. • A setting that can be stored in a program cannot be changed at the time that a program is used for a transmission even if the setting is not stored in the program. • The only settings that can be selected when using a program are the original size enter, duplex scanning, and a timer setting. USING A PROGRAM 1 In fax mode, place the original and select "Program" with the [ 2 Select the program that you wish to use. ] or [ ] key. If not all letters of the program name appear, press the [READ-END] key ( ) to display all letters. Press the [READ-END] key ( ) once again to return to the original screen. 3 If needed, select the original size and other settings, and then press the [BLACK & WHITE START] key . • Transmission takes place according to the program. • If you selected a program that does not include a transmission method, set the transmission method and the destinations to be dialled before pressing the [BLACK & WHITE START] key. Note Select settings that cannot be stored in a program before you press the [BLACK & WHITE START] key in step 3. These settings include the original size (see "SELECTING THE ORIGINAL SIZE" (p. 29)), duplex scanning (see "FAXING A TWO-SIDED ORIGINAL" (p. 88)), and a timer setting (see "AUTOMATIC TRANSMISSION AT A SPECIFIED TIME" (p. 98)). 112 FAX FUNCTIONS FORWARDING RECEIVED DATA TO A NETWORK ADDRESS (INBOUND ROUTING SETTINGS) You can have received faxes automatically forwarded to a specified shared folder. As an example, this function can be used to route received faxes to a specified folder without printing the faxes. The following explanation assumes that the Web page has been accessed with administrator rights. For the procedure for accessing the Web pages, see "ABOUT THE WEB PAGES" (p. 190). [. . . ] Obtaining source code Some of the open source software licensors require the distributor to provide the source code with the executable software components. For information on obtaining the source code for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the following website: http://sharp-world. com/products/copier/source/download/index. html We are unable to answer any questions about the source code for the open source software. The source code for the software components whose copyrights are held by SHARP is not distributed 208 TRADEMARK ACKNOWLEDGMENTS The following trademarks and registered trademarks are used in conjunction with the machine and its peripheral devices and accessories. • Microsoft®, Windows®, Windows® XP, Windows Server® 2003, Windows Vista®, Windows Server® 2008, Windows® 7, Windows® 8, Windows Server® 2012 and Internet Explorer® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Adobe, the Adobe logo, PostScript, Acrobat, the Adobe PDF logo, Reader, and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP LC70/80/90LE657/747/757/E/RU/K/EN/KN will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.