User manual SHARP LC24LE250EBK/EWH OPERATIONMANUAL

[. . . ] LCD COLOUR TELEVISION LCD-FARB-TV TELEVISIONE A COLORI LCD OPERATION MANUAL BEDIENUNGSANLEITUNG MANUALE DI FUNZIONAMENTO TÉLÉVISEUR LCD COULEUR MODE D'EMPLOI 50232543 FRANÇAIS ITALIANO LC-24LE250E-BK LC-24LE250E-WH DEUTSCH ENGLISH Contents Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Viewing the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Standby Notifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] | To enable PC audio, you will need to use the SIDE AV CONNECTION cable’s WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV will automatically switch to AV mode. | When receiving DTV channels (Mpeg4 H. 264) or while in Media Browser mode, output will not be available via the scart socket. | When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of the TV before mounting on the wall. You should refer to the module instruction manual for details of the settings. English - 11 - Switching On/Off To Switch the TV On Connect the power cord to the 220-240V AC 50 Hz. Switch the “ ” button on the bottom right hand side under the screen to position “|” so the TV will switch to standby mode. To switch on the TV from standby mode either: • Press the “ ” button, P+ / P- or a numeric button on the remote control. • Press and hold the control switch on the left hand side of the TV. The TV will then switch on. Note: If you switch on your TV via P+ / P- buttons on the remote control or P/CH+/- on the TV set, the programme that you were watching last will be reselected. channels are sorted according to the LCN (*), please select “Yes” and than press OK. (*) LCN is the Logical Channel Number system that organizes available broadcasts in accordance with a recognizable channel sequence (if available). Cable Installation If you select CABLE option and press OK button on the remote control. Note: Searching duration will change depending on the selected search step. Media Playback via USB Input You can connect a 2. 5” and 3. 5” inch (hdd with external power supply) external hard disk drives or USB memory stick to your TV by using the USB inputs of the TV. To Switch the TV to Standby To switch the TV to low power stand by press the “ ” button on the remote control or press and hold the control switch on the left hand side of the TV. Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active. To Switch the TV Off Switch the “ ” button on the bottom right hand side , so under the screen to position 2 as illustrated, the TV will switch off. IMPORTANT!Manufacturer will not be responsible for any file damage or data loss. MP3 Players) or USB hard disk drives/memory sticks may not be compatible with this TV. The TV supports FAT32 and NTFS disk formatting but recording will not be available with NTFS formatted disks. While formatting a USB hard disk that has 1TB (Tera Byte) or more file capacity, you can experience problems with the formatting process. This may cause physical damage to the USB player and USB device itself. Recording a Programme IMPORTANT: When using a new USB hard disk drive, it is recommended that you first format the disk using your TV’s “Format Disk” option. Note : To record a programme, you should first connect a USB disk to your TV while the TV is switched off. To use the recording function, you need to connect a USB disk or an external hard disk drive to the TV and the connected USB disk should have at least 1 GB capacity and should have 2. 0 speed compatibility. If the connected USB device does not support 2. 0 speed, an error message will be displayed. If desired, you can store/copy recordings onto a computer; however, these files will not be available to be played on a computer. You can play the recordings only via your TV. To power down the TV completely, unplug the power cord from the mains socket. [. . . ] Press the Power button on the TV. Poor picture • Have you selected the correct TV system?• Low signal level can cause picture distortion. Please check antenna access. • Check if you have entered the correct channel frequency if you have done manual tuning. • The picture quality may degrade when two devices are connected to the TV at the same time. [. . . ]