User manual SHARP LC-M3700

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP LC-M3700. We hope that this SHARP LC-M3700 user guide will be useful to you.


SHARP LC-M3700 : Download the complete user guide (4397 Ko)

You may also download the following manuals related to this product:

   SHARP LC-M3700 (4440 ko)
   SHARP LC-M3700 (4067 ko)
   SHARP LC-M3700 (4400 ko)
   SHARP LC-M3700 (4055 ko)
   SHARP LC-M3700 (4049 ko)
   SHARP LC-M3700 (4048 ko)
   SHARP LC-M3700 (4439 ko)
   SHARP LC-M3700 (4440 ko)
   SHARP LC-M3700 OPERATION MANUAL (4439 ko)
   SHARP LC-M3700 OPERATION MANUAL (4052 ko)

Manual abstract: user guide SHARP LC-M3700

Detailed instructions for use are in the User's Guide.

[. . . ] ENGLISH DEUTSCH LC-M3700 LC-M3710 WIDE LCD MONITOR BREITBILD-LCD-MONITOR MONITEUR GRAND ÉCRAN À CRISTAUX LIQUIDES MONITOR LCD PANORÁMICO FRANÇAIS ESPAÑOL OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUAL DE MANEJO STANDBY/ON INPUT RETURN VOL MENU ENTER ENLARGE WIDE LCD MONITOR This equipment complies with the requirements of Directive 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/ 68/EEG. [. . . ] * This is returned when there is no such command, or when the command cannot be used in the current state of the monitor (i. e. * If there is a bad connection between the PC and monitor, or if communication has not been established, nothing is returned (not even ERR). If a command takes some time to execute, WAIT may be returned as the return value. New commands cannot be received during this time, even if they are sent. If RS-232C control has been locked with Control lock (see page 52), LOCKED is returned as the returned value. I When a command has not been executed correctly* Carriage return code (0DH, 0AH) E R R I If execution of the command is Carriage return taking some time code (0DH, 0AH) W A I T I If RS-232C is locked Carriage return code (0DH, 0AH) L GB O C K E D 36 PC Operation (Continued) Advanced operation I This section explains commands for daisy chain connection. The basic communication procedure is the same as in the "Basic operation" section. <ID numbers> You can assign a unique ID number to each monitor (see page 54). This allows you to control a particular monitor in a daisy chain of monitors. Up to about 20 monitors can be connected, depending on the length of RS-232C cables and installation environment. You can assign ID numbers either from the menu screen (via remote control or the control buttons on the monitor) or from the PC using RS-232C cable. [Example] PC ID number: 1 ID number: 2 ID number: 3 ID number: 4 If monitors are connected as shown above, you can execute commands like "Set the volume of the monitor with ID 4 to 20". PC Operation When controlling monitors linked in a daisy chain by designating ID numbers, you should basically avoid any duplication of ID numbers. If the same ID number is assigned to multiple monitors, only the monitor closest to the PC can be controlled with that ID number. If monitors are connected as shown below, only the monitor 1 can be accessed with ID number 2. Monitor 2 cannot be controlled using that ID number. [Example] PC ID number: 1 ID number: 2 ID number: 2 ID number: 3 ID numbers do not have to be assigned in ascending order starting from the PC. [Example] PC ID number: 3 ID number: 2 ID number: 4 ID number: 1 Continued on the next page. 37 GB PC Operation (Continued) <Commands for ID control> The command examples shown on this page assume the following connection and ID number set up. PC ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST······A monitor receiving this command sets its own ID number in the parameter field. Example: IDST0001 OK 001 The ID number of this monitor is set to 1. Note After linking monitors, you can automatically assign ID numbers by using the IDST command with the Repeater control (see "Repeater control" on page 40). [Example] PC Set 1 Set 2 Set 3 Set 4 If you connect monitors as shown above, and use the command "IDST001+", ID numbers will be set automatically, as shown below. [Example] PC ID number: 1 ID number: 2 ID number: 3 ID number: 4 IDST001+ WAIT OK 001 OK 002 OK 003 OK 004 ID setting command with repeater control ID = "OK" response from ID number=1 ID = "OK" response from ID number=2 ID = "OK" response from ID number=3 ID = "OK" response from ID number=4 (End) GB 38 PC Operation (Continued) IDSL······ The parameter of this command sets the ID number indicating the monitor subject to the next command. Example: IDSL0002 The next command is for the monitor with ID number=2. OK 002 Found monitor with ID number=2 VOLM0030 Set volume of monitor with ID number=2 to 30 WAIT Processing OK 002 OK response from monitor with ID number=2 The IDSL command is VOLM0020 Set volume to 20 effective only once, for the OK 001 The volume of the monitor with ID number=1 immediately succeeding (the one directly connected to the PC) is set to command. IDLK······ The parameter of this command sets the ID number indicating the monitor subject to all subsequent commands. Example: IDLK0002 Following commands are for the monitor whose ID number is "2". OK 002 Found monitor with ID number=2 VOLM0030 Set volume of monitor with ID number=2 to 30 The IDLK command WAIT Processing remains effective until it is OK 002 cancelled, or power is shut off. VOLM0020 Set volume of monitor with ID number=2 to 20 WAIT OK 002 IDLK0000 WAIT OK 002 VOLM0010 OK 001 PC Operation Cancelling ID number setting Cancelling IDLK Cancellation complete The volume of the monitor with ID number=1 (the one directly connected to the PC) is set to 10. IDCK······ Provides screen display of the ID number currently assigned to a monitor, and the ID number currently set for IDLK (if any). [. . . ] AC CR GB 64 Specifications Product Model Screen size LCD Panel Colour system Speaker Audio amplifier Terminals Drive Number of dots Wide LCD Monitor LC-M3700/LC-M3710 37" (819. 6 mm (width) x 460. 8 mm (height), 940. 3 mm (diagonal)) TFT (thin film transistor) Active Matrix 3, 147, 264 dots (768 (height) x 1, 366 (width) x 3) NTSC (3. 58/4. 43MHz), PAL/PAL-60, SECAM 5 cm, 1 piece External speakers: 20 W (10 W + 10 W) INPUT1 INPUT2(INPUT/OUTPUT VIDEO OUTPUT INPUT3 (Y/G, Cr/Pr/R, Cb/Pb/B, HD, VD) INPUT3/PC(ANALOG) OUTPUT PC(ANALOG)INPUT PC(DIGITAL)INPUT Built-in monitor speaker: 0. 8 W VIDEO in (BNC), S-video in, AUDIO (L/R) in VIDEO in/out (RCA), AUDIO (L/R) in/out VIDEO out (BNC) COMPONENT video in/PC (ANALOG) in (BNC), AUDIO in (stereo jack, 3. 5mm) INPUT3/PC (ANALOG) OUTPUT (Mini D-Sub 15 pin) PC (ANALOG) INPUT in (Mini D-Sub 15 pin), AUDIO in (stereo jack, 3. 5 mm) PC (DIGITAL) INPUT in (DVI-D) RS-232C INPUT terminal (9 pins), RS-232C OUTPUT terminal (9 pins), SPEAKER terminal (L/R), AC input terminal Power requirement Power consumption Standby power consumption Dimensions Weight Operating temperature Operating humidity AC110 - 240V, 50/60Hz 182 W 1. 2 W 949 mm x 99. 5 mm x 572 mm 19 kg (without stand) 0°C ­ +40°C 20% ­ +80% I As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. I The Liquid Crystal panel is a very high technology product with 3, 147, 264 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP LC-M3700




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP LC-M3700 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.