User manual SHARP LC-70UD1U

[. . . ] SHARP ELECTRONICS CORPORATION Sharp Plaza, Mahwah, New Jersey 07495-1163 OPERATION MANUAL MODE D’EMPLOI MANUAL DE OPERACIÓN SHARP CORPORATION IMPORTANT : Please read this operation manual before starting operating the equipment. For details, refer to the following: • For the operation manual: http://www. The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] 2 Press a/b to select "Software Update" , and then press ENTER. Auto Update Setting When the TV is on, or when an Internet application is being accessed, this function enables the TV to connect to the network and check for updates automatically. Press c/d to select "Yes", and then press ENTER to display the download screen. ) NOTE • Performing any of the three above will activate the V-CHIP BLOCK. : The content rating can be set, but this rating is not normally broadcast by TV stations. € This function does not work when a broadband connection or Internet Setup is not available. Indd 27 2013/07/03 15:30:17 On-Screen Display Menu Manual Update Select the method for manually updating the software. USB Update: Updates the software using a USB memory device containing the update file. ) Network Update: Downloads the update file via the network and then updates the software. ) NOTE 3 Press ENTER to start checking the data in the USB memory device. 5 To update the TV software with the update file, select "Yes", and then press ENTER. Current Version Update Version : UXXXXXX1 : UXXXXXX2 7 After the screen shown below is displayed, press ENTER. update Version: UXXXXXX2 OK OK 4 During the data checking , "Checking" blinks. € You cannot update the software using a SD memory card containing the update file. € A broadband connection and Internet Setup are required to update the software using the network. ) • It may take time to access and download the update depending on the Internet connection and other factors. – Updating the Software with a USB Memory Device To check for the availability of a software update, visit http://www. CAUTION • The current version of the TV software and the version of the update file on the USB memory device are displayed. Current Version Update Version : UXXXXXX1 : UXXXXXX2 CAUTION • Do not remove the USB memory device or unplug the AC cord while the software is being updated. € Do not remove the USB memory device or unplug the AC cord while the software is being updated. € Be sure to properly follow the whole procedure described below, step by step. Otherwise, for example, the TV cannot read the data in the USB memory device and software updating will fail. [. . . ] This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may vary. [. . . ]