User manual SHARP LC-42

[. . . ] TELEWIZOR KOLOROWY LCD LCD SZÍNESTELEVÍZIÓ TELEVIZOR S BAREVNOU LCD OBRAZOVKOU TELEVÍZOR S FAREBNOU LCD OBRAZOVKOU VÄRVILINE LCD-TELER SIDRO KRISTLU EKRNA (LCD) KRSU TELEVIZORS SPALVINIS LCD TELEVIZORIUS LCD ( ) LCD RENKL TELEVZYON LCD COLOUR TELEVISION ENGLISH TÜRKÇE LIETUVISKA INSTRUKCJA OBSLUGI KEZELÉSI ÚTMUTATÓ NÁVOD K OBSLUZE NÁVOD NA OBSLUHU KASUTUSJUHEND LIETOSANAS ROKASGRMATA NAUDOJIMO INSTRUKCIJA KULLANMA KILAVUZU OPERATION MANUAL LATVISKI EESTI SLOVENSKY CESKY LC-32DH77E LC-42DH77E LC-46DH77E LC-52DH77E LC-32DH77V LC-42DH77V LC-46DH77V LC-52DH77V MAGYAR POLSKI SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. ASA DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious electric shock may occur. [. . . ] NOTE · The factory default for this item is "Off". Using Genre Info. This function allows you to automatically switch to the appropriate sound mode depending on the genre information included the digital broadcast. 2 Press a/b to select "Using Genre Info. ", and then press OK. 3 Press c/d to select "On", and then press OK. 20 AQUOS LINK Operating an AQUOS LINK device AQUOS LINK allows you to operate the HDMIconnected device with a single remote control unit. 2 Press PLAY I to start playback of a title. · See the right column, section "Playback of titles using AQUOS LINK" if you want to start playback using the list of the titles of the AQUOS BD Player/ AQUOS Recorder. 1 2 Open the remote control unit's flip cover, and then press OPTION. Press a/b to select "Setup Menu", and then press OK. NOTE · If a connected device does not have this function or the device is in a status where the menu cannot be displayed (recording, entering standby, etc. ), this function may not be available. 3 Press FWD J to fast forward. Press B to turn the HDMI-connected device on/off. Playback of titles using AQUOS LINK This section explains how to play back a title in the AQUOS BD Player/AQUOS Recorder. 1 Open the remote control unit's flip cover, and then press OPTION. 2 Press a/b to select "Top Menu/Title List", and then press OK. · The linked recorder now powers on and the TV automatically selects the appropriate external input source. · The title list data from the connected AQUOS BD Player/AQUOS Recorder displays. Listening with the AQUOS AUDIO speaker system You can choose to listen to the TV sound only from the AQUOS AUDIO speaker system. 1 Open the remote control unit's flip cover, and then press OPTION. AQUOS LINK Menu Recorder EPG Top Menu/Title List Media change By AQUOS AUDIO SP By AQUOS SP Sound mode change Setup Menu Model select 3 Select the title with a/b/c/d, and then press PLAY I. Selecting media type for CEC-compatible recorder If your recorder has multiple storage media, select the media type here. 1 Open the remote control unit's flip cover, and then press OPTION. The media type changes every time you press OK. 2 Press a/b to select "By AQUOS AUDIO SP", and then press OK. · The sound from the TV speaker and headphone terminal is silenced and only the sound from the AQUOS AUDIO speaker system is audible. Listening with the AQUOS TV speaker system You can choose to listen to the TV sound only from the AQUOS TV speaker system. 1 Open the remote control unit's flip cover, and then press OPTION. 2 Press a/b to select "By AQUOS SP", and then press OK. HDMI device selection If multiple HDMI devices are connected in a daisy chain, you can specify which device to control here. 1 Open the remote control unit's flip cover, and then press OPTION. The HDMI device changes every time you press OK. Manually changing the AQUOS AUDIO speaker system's sound mode 1 2 3 Open the remote control unit's flip cover, and then press OPTION. The sound mode changes every time you press OK. · Refer to the operation manual of the AQUOS AUDIO speaker system for details. Recording via the AQUOS Recorder EPG (only for recorders) You can call up the CEC-compatible recorder's EPG and preset timer recordings using the TV's remote control unit. 1 Open the remote control unit's flip cover, and then press OPTION. 2 Press a/b to select "Recorder EPG", and then press OK. · The external input source switches and the recorder's EPG is displayed. Calling up the menu of an external device connected with the TV via HDMI You can call up the menu of an HDMI CEC-compatible external device (player, recorder, decoder, etc. ) using the "Setup Menu" function. 3 Select the programme to record. · Refer to the operation manual of the recorder for details. 21 Menu operation What is the MENU? · You need to call up the OSD to perform settings for the TV. · The "MENU" enables various settings and adjustments. · The "MENU" can be operated with the remote control unit. Common operations 1 Display the MENU Screen Press MENU and the "MENU" screen displays. Picture 2 Select an item Press a/b/c/d to select/adjust the desired menu, and adjust the item to the desired level, and then press OK. Press 6 to return to the previous "MENU" page. DYNAMIC OPC Backlight Contrast Brightness Colour Tint Sharpness Advanced Reset [+14] [+30] [0] [0] [0] [0] ­16 0 ­30 ­30 ­30 ­10 [Off] +16 +40 +30 +30 +30 +10 E Selecting in the MENU ECO Energy Save No Signal Off No Operation Off Sleep Timer [Off] [Disable] [Disable] 3 Exit the MENU screen The operation will exit the "MENU" screen if you press END before it is completed. E Selecting options Digital Search Analogue Search NOTE · "MENU" options differ in the selected input modes, but the operating procedures are the same. [. . . ] Please purchase them at your nearest shop. · Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. No. 1 Part name Wall mount bracket (LC-32DH77E, LC-32DH77V) Wall mount bracket (LC-42DH77E, LC-42DH77V, LC-46DH77E, LC-46DH77V, LC52DH77E, LC-52DH77V) Part number AN-37AG5 2 AN-52AG4 42 End of life disposal A. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. [. . . ]