User manual SHARP LC-32D44S

[. . . ] The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or )5) and of the same rating as above, which is also indicated on the pin face of the plug, must be used. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. [. . . ] € Check the operation manual of the external equipment for the signal type. • TV , EXT3 , EXT4 , EXT5 , EXT6 and EXT7 are not displayed in Input Select. € If both CVBS and RGB signals are input to EXT 1 or EXT 2 using a SCART cable, the TV may output an RGB signal even though you have designated CVBS for the respective terminal. Colour System TV/AV only Option Audio Only DNR HDMI Setup [Off] Menu Operation: A (page 12) You can change the colour system to one that is compatible with the image on the screen. If an image does not display clearly, select another colour system (e. Selectable items RGB/YCbCr 4:4:4/ YCbCr 4:2:2 ITU601/ITU709 Description Select the video signal type from the HDMI terminal. Select the internal colour space conversion method when an RGB signal is input. Set whether or not to use WIDE MODE based on signal recognition, including an HDMI signal. HDMI Setup items Signal Type* Colour Matrix* Dynamic Range* Normal/Enhanced Auto View Disable/Enable Audio Select** Digital/Analogue NOTE • Refer to your external equipment operation manual for the signal type. € Items marked * may be greyed out (with 4) depending on the type of signal input from the external equipment. Indd 19 2008/02/21 9:44:44 Useful features WIDE MODE TV/AV only WIDE MODE You can select the picture size. A thin side bar appears on each side, and you may see bars on the top and bottom with some programmes. Panorama: In this mode the picture is progressively stretched toward each side of the screen. € The menu lists the wide mode options selectable for the type of video signal currently received. € As you toggle down the options, each is immediately reflected on the screen. Auto Selection If you set WSS and 4:3 Mode in the Setup menu on page 18, the optimum WIDE MODE is automatically chosen for every broadcast, VCR or DVD containing the WSS information. ) 4:3 Mode menu To set the type of the wide screen, select “Normal” or “Panorama” in the 4:3 Mode menu. ) 4:3 Mode set to “Normal” 4:3 Mode set to “Panorama” NOTE • If the signal contains no WSS information, Auto Selection will not function even when the WSS option is enabled. Indd 20 2008/02/21 9:44:45 Useful features Still image You can freeze a motion picture on the screen. Time display You can display the time information included in the DTV and Teletext broadcasts. NOTE • When this function is not available, “No still image display available. Press p again within the several seconds that the channel display is on the screen. [. . . ] When purchasing, please read the newest catalogue for compatibility and check the availability. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*. [. . . ]