User manual SHARP LC-32/39LE351E OPERATION MANUALDEIT

[. . . ] The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. [. . . ] To use Standby search please make sure that you select Standby Search as On. If the Standby Search is set to On, when the TV is in standby mode, available broadcasts will be searched. If the TV locates any new or missing broadcasts, a menu screen will be displayed, asking you whether or not to execute these changes. Please activate Standby Search setting in order to enable your TV for automatically updating the broadcast frequency of the broadcaster, broadcast definition and similar changes. While Store Mode is enabled, some items in the TV menu may not be available to be set. DLNA renderer feature allows you to share files stored on your smartphone. If you have a DLNA renderer compatible smartphone and software installed, you can share/play photos with your TV. Always On: The TV always switches on when main on/off button is pressed. / Last State: The TV always switches on with the last selected channel/source. Standby Search (optional) Store Mode DLNA Renderer Power Up Mode Virtual Remote English - 18 - Electronic Programme Guide (EPG) Some, but not all channels send information about the current and next programmes. Set Timer / Delete Timer After you have selected a programme in EPG menu, press the OK button and and Options screen will be displayed. To cancel an already set timer, highlight that programme and press the OK button. Note: It is not possible to record or set timer for two or more individual events at the same time interval. Recording a Programme IMPORTANT: When using a new USB hard disk drive, it is recommended that you first format the disk using your TV’s “Format Disk” option. To record a programme, you should first connect a USB disk to your TV while the TV is switched off. IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. Note: Switching to a different broadcast or source is not available during the recording. For using recording function, you should connect a USB disk or an external hard disk drive to the TV and connected USB disk should have at least 1 GB capacity and should have 2. If desired, you can store/copy recordings on a computer; however, these files will not be available to be played on a computer. If the writing speed of the connected USB disk is not sufficient, recording may fail and timeshifting feaute may not be available. Recordings of HD programmes can occupy bigger size on the USB disk depending on the broadcast’s resolution. For this reason it is recommended to use USB hard disk drives for recording HD programmes. [. . . ] The Nero MediaHome installation wizard checks the availability of required third-party software on your PC. If applications are missing they are listed and must be installed before continuing installation. In order to offer a better service, Nero is collecting anonymous data to determine which features are used and what problems, if any, occur. If you would like to help by participating in the anonymous collection of usage data, select the 8. [. . . ]