User manual SHARP LC-20B10N
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP LC-20B10N. We hope that this SHARP LC-20B10N user guide will be useful to you.
You may also download the following manuals related to this product:
SHARP LC-20B10N (6658 ko)
Manual abstract: user guide SHARP LC-20B10N
Detailed instructions for use are in the User's Guide.
[. . . ] LC-20B10N
LCD COLOUR TELEVISION
OPERATION MANUAL
Printed in Malaysia Printed on post-consumer recycled paper. TINS-C344WJZZ
06P04-MA-NM
ENGLISH
LC-20B10N
OPERATION MANUAL ENGLISH
Contents
Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Dear SHARP Customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] All the TV stations in your area that can be received by the LCD TV set are automatically preset. The screen shows whatever is on channel 1 when full auto channel preset is finished.
3
Press TV/VIDEO to return to the normal screen.
NOTE
· Unused channels are automatically skipped. · Instead of pressing MENU for more than 2 seconds, you can set the channel by selecting "CH SETUP" in "SETUP" in the Menu screen. (See page 14. )
12
Preset (Continued)
Presetting the Channels (MANUAL)
Setting a channel to a desired TV station Upper control panel 4 3 1, 2, 6 In a weak reception area or under bad reception conditions Upper control panel 4 1, 2, 3, 5
1 2 1
Press MENU (PRESET-1) on the upper part of the LCD TV set for more than 2 seconds to display the AUTO mode screen.
Sound System
Press MENU (PRESET-1) on the upper part of the LCD TV set for more than 2 seconds to display the AUTO mode screen. While the MANUAL mode screen is displayed, press MENU (PRESET-1) for more than 2 seconds. After finishing the adjustment, press MENU (PRESET-1) to continue channel presetting.
3 4 5
2
Press MENU (PRESET-1) to display the MANUAL mode screen.
· Press MENU (PRESET-1) again to change the MANUAL mode as shown below.
NOTE
· While the MANUAL mode screen is displayed, press MENU (PRESET-1). (The LANGUAGE mode screen will appear. )
AUTO
MANUAL
LANGUAGE
NORMAL SCREEN
3
Select the channel position using Channel Select or CH ( )/( ).
Press MENU for more than 2 seconds.
4
Press VOL ()/(+) (PRESET-2) to locate the channel you want to preset to the position. Search is initiated and when a TV signal is received during the search, the search stops. Repeat steps 3 and 4 above, to preset the channel positions for other broadcasts, etc.
5
6
Press MENU (PRESET-1) twice to return to the normal screen.
NOTE
· System may not have been set correctly, if noise can be heard or if there is no sound. (See page 14. )
13
Preset (Continued)
Channel Setting (AUTO)
Selected item
POSITION
Description
The channel position changes to the upper or lower number.
AUTO PAL60 B/G I PAL N443 D/K M SECAM N358
COLOUR SYSTEM The mode changes in the following order:
SOUND SYSTEM The mode changes in the following order: The mode changes in the following order: OFF ON Channel numbers with a " (RED)" mark on the left are set to skip. To turn off Skip, press Channel Select to select the desired channel, and then set the Skip mode on the CH setup menu to "OFF". The broadcast sound system changes in the following order: OFF (Monaural TV sound) ON (NICAM sound) Stereo system changes in the following order: OFF (Monaural TV sound) ON (A2 sound)
SKIP
1 2 3 4 5
Press MENU to display the Menu screen. Each time you press \/|, the setting for individual items changes as shown in the table on the right.
FINE NICAM
A2
NOTE
· Switching Colour system: Set the system to Auto for normal TV reception. The Auto mode automatically detects the receiving signal system and changes the reception system of the LCD TV set. When the picture or sound is not stable, switching to an appropriate system may improve the picture or sound quality. · When using Fine tuning, the channel number changes from green to yellow. · To return the channel to its original frequency setting, follow the manual channel preset procedure. (For details, see "Presetting the Channels (MANUAL)" on page 13. )
6 7
Press '/" to select "START SEARCH", and press ENTER to begin the automatic programme search. When the automatic programme search is completed, the channel first received will be displayed.
Channel Setting (MANUAL)
1 2 3
Perform steps 1 to 3 in Channel Setting (AUTO). Press '/" to select the desired adjustment item.
4 5
Each time you press \/|, the setting for individual items changes as shown in the table on the right. Press MENU to exit.
14
Selecting Menu Items
Menu setting screens
NOTE
· The illustrations and on-screen displays in this manual are for explanation purposes and may vary slightly from the actual appearance. · Depending on the setting condition, such as an input mode, it may not be possible to adjust or set some items. [. . . ] There is no picture from AV1/2/3.
· Make sure the volume is not set to minimum. There is no sound.
11 11
There is no picture or sound, just noise.
· Make sure the antenna cable is properly connected. · Bad reception can be considered.
5
· Make sure the antenna cable is properly connected. The picture is not clear.
5
The picture is too light or improperly tinted.
· Check colour adjustment. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP LC-20B10N
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP LC-20B10N will begin.