User manual SHARP DX-SX1/H/W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP DX-SX1/H/W. We hope that this SHARP DX-SX1/H/W user guide will be useful to you.


SHARP DX-SX1/H/W : Download the complete user guide (857 Ko)

You may also download the following manuals related to this product:

   SHARP DX-SX1/H/W (780 ko)
   SHARP DX-SX1/H/W (767 ko)
   SHARP DX-SX1/H/W (801 ko)
   SHARP DX-SX1/H/W (784 ko)
   SHARP DX-SX1/H/W (734 ko)

Manual abstract: user guide SHARP DX-SX1/H/W

Detailed instructions for use are in the User's Guide.

[. . . ] 1-1 Handling the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Laser Information for North America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Printer Orientation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Never attempt to lift the printer alone. · To lift the printer, have two individuals facing each other from the front and the rear of the printer grasp the recessed areas on each side of the printer. Do not lift the printer by grasping any area other than these recessed areas. The machine should be installed near an accessible power outlet for easy connection. A small amount of ozone is produced within the printer during operation. It is advisable to place the printer in a ventilated area, since the small amount of ozone that is emitted may have an objectionable odor. · · Laser Information for North America Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Type Wave length Pulse times Output power DX-SX1/H/W 785nm 6. 7us 0. 12mW DX-B450P 785nm 8. 2us 0. 22mW This Digital Equipment is rated Class 1 and complies with 21 CFR 1040. 10 and 1040. 11 of the CDRH standards. This means that the equipment does not produce hazardous laser radiation. · · Do not remove the cabinet, operation panel, or any other covers. The equipment's exterior covers contain several safety interlock switches. Do not bypass any safety interlock by inserting wedges or other items into switch slots. 1-2 Installation Manual Printer Orientation Introduction Printer Orientation Throughout this manual, the four sides of the printer are referred to as front, rear, right, and left. The front of the printer is the side near the Operator Panel, and the rear of the printer is opposite the front. The left and right sides of the printer are defined as the sides to the left and right, respectively, of a person who is facing the front of the printer. Warranty While every effort has been made to make this document as accurate and helpful as possible, SHARP CORPORATION makes no warranty of any kind with regard to its content. If stored standing on end, the toner may not distribute well even after shaking the cartridge vigorously, and will remain inside the cartridge without flowing out. Supply of Spare Parts and Consumables The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the termination of production. Spare parts are those parts of the machine which may break down within the scope of the ordinary use of the product, whereas those parts which normally exceed the life of the product are not to be considered as spare parts. For easy operation, maintenance and replacing of consumables, you should also leave the clearances shown below around the printer. Installation of the printer should be carried out by qualified service personnel. 200 mm (7-7/8 in) 200 mm 255 mm (10-3/64in) 255 mm 402 mm (15-53/64) in) 402 mm 300 mm 300 mm (11-52/64in) 2-2 Installation Manual Installation Procedure Basic Installation Installation Procedure Removing the Tape When the printer is first taken out of the packaging box, the covers of the printer are taped as shown in the diagram. Remove the fuser locking device by pushing the tabs as shown on the instructions at the rear of the printer. NOTE: The small lever to back of the unit is used for an optional part that is not available on this printer. The lever should remain in the down position. Installing the Toner Cartridge When installing the Toner Cartridge, take note of the following points below: · · · · · · · Never throw a Toner Cartridge into an open flame. When installing the Toner cartridge, select a location not subject to strong light and try to finish the installation within 5 minutes. The drum might get damaged. Installation Manual 2-3 Installation Procedure Basic Installation · · · A drum shutter protects the photosensitive drum from light. Toner is not harmful to the human body, but if some toner has come into contact with your skin, you can wash it off with cold water and soap. If toner gets on your clothing, you should try to immediately remove it with a vacuum cleaner which has a fine filter. [. . . ] Make sure that the power switch has been firmly pushed to the <O> position and then insert the other end of the power cord to a correctly rated power outlet. Connect the printer exclusively to an outlet with a suitable voltage rating and current rating for your printer's model. 2-8 Installation Manual Using the Operator Panel Basic Installation Turning the Printer On 1. Press the power switch to the <I> position to turn the power on. NOTE: The printer motors run for 2 or 3 minutes when you first turn the power on. The printer displays a series of messages and then displays READY when it is available for use. NOTE: While turned on, the printer will go into the standby state if it remains idle for a period of time. When you have finished using the printer for the day or you do not intend to use it for a long period of time, switch off the power. Using the Operator Panel To configure the printer, press the MENU button and use the NEXT, RETURN and PREVIOUS buttons to navigate through the Operator Panel options and the SELECT button to choose the option. You can use the CANCEL button to exit any current selection. LCD Display STATUS MENU ACTIVE FAULT START/STOP NEXT RETURN PREVIOUS SELECT CANCEL INFO Installation Manual 2-9 Selecting a Display Language Basic Installation Selecting a Display Language The default language for all LCD display messages, the Configuration Summary, and the Test Page is English. Navigate through the System Menu to select the desired language: NOTE: The language that you select will be reflected on all LCD display messages, and also the content of the Configuration Summary. Printing a Configuration Summary Your printer can print a Configuration Summary that lists the currently selected status of menu options, media selections in trays, options installed and other relevant information about your printer. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP DX-SX1/H/W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP DX-SX1/H/W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.