User manual SHARP DV-740 OPERATION MANUAL

[. . . ] SPECIAL NOTE FOR USERS IN THE U. K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 1. 6 A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked same rating as above, which is also indicated on the pin face of the plug, must be used. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut-off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in a safe manner. [. . . ] If you are using SCART output, you can choose one of these three kinds output ways, which matches with your TV' SCART input. s - - TV SETUP PAGE - TV DISPLAY TV TYPE SCART OUT MAIN PAGE SET TV DISPLAY MODE l TV DISPLAY NORMAL/PS 4:3 Pan & Scan video output for a normal TV set NORMAL/LB 4:3 Letterbox video output for a normal TV set WIDE 16:9 Wide Screen video output for a wide screen TV set ?? COMPOSITE RGB S-VIDEO NOTES: i Aspect ratios available for playback will be printed on the DVD rear packaging. i Some DVDs are recorded in the Cinema Wide format (16:9 aspect ratio), and some are recorded in the standard format (4:3 aspect ratio). Some DVD discs are recorded in both formats and may have the Pan Scan feature available. The Pan Scan feature if available will fill the entire screen in 4:3 TV screen. NOTES: i SCART video output and S-Video output cannot be used simultaneously. i The changes of TV output can be made with the disc tray opened status. Press the DISPLAY SET TV OUTPUT button on the remote control and the TV output will be changing in turn as COMPOSITE ßà RGB ßà S-VIDEO - 16 - < AUDIO SETUP There are two available items: They are AUDIO OUT and DOWN MIX. l AUDIO OUT You can choose to send the player' audio signals to an s external receiver using the following outputs: l DOWN MIX Pro Logic Please connect to a built-in Dolby Pro Logic receiver or amplifier to enjoy the Dolby Pro Logic surround sound. ?? STEREO Down mixed Stereo L/R audio output. - - AUDIO SETUP PAGE - AUDIO OUT DOWNMIX MAIN PAGE ? ANALOG: Audio signals are sent using stereo (L/R) audio terminals. Selecting this choice will disable the digital audio outputs. ? Pro Logic STEREO BITSTREAM: Set to this selection will output the raw bit stream signal of Dolby Digital or DTS from the coaxial jack. In order to enjoy Dolby Digital DTS discs, this unit' s digital output jack must be connected to the digital-input jack of a Dolby Digital or DTS compatible receiver or processor. ® ® ® SET DOWNMIX MODE ? D-PCM: PCM stands for Pulse Code Modulation and is digital audio. Connecting this unit to an amplifier with a built-in D/A converter can play the same digital audio format as on CDs. Additionally, 2-channel analog audio will output from the audio output jacks of amplifier. < DOLBY DIGITAL SETUP There are two available items: They are DUAL MONO and DYNAMIC. l DUAL MONO There are four available modes: STEREO, L-MONO, R-MONO, and MIX-MONO. - - DOLBY DIGITAL SETUP - - - - AUDIO SETUP PAGE - AUDIO OUT DOWNMIX MAIN PAGE ANALOG BITSTREAM D-PCM DUAL MONO DYNAMIC MAIN PAGE STEREO L-MONO R-MONO MIX-MONO DUAL MONO (1 + 1) SETUP SELECT AUDIO OUTPUT Audio output description NOTES: i i Analog and digital audio signals cannot output simultaneously. Do not play the Dolby® Digital or DTS® or MPEG audio sound tracks on an audio component without having a built-in Dolby® Digital or DTS or MPEG audio decoder. Otherwise, when you play the Dolby® Digital or DTS or MPEG audio sound track, a loud noise will come out from the speakers, affecting your ears or causing the speakers to be damaged. i This player has a conversion function for converting Dolby® Digital and MPEG audio into the LPCM format. This allows playback of CDs with the regular playback system without the need for a special converter. L-MONO R-MONO MIX-MONO L-MONO R-MONO L-MONO+R-MONO L-MONO R-MONO L-MONO+R-MONO MODE LEFT SPEAKER STEREO -L RIGHT SPEAKER STEREO -R STERO - 17 - l DYNAMIC "Dynamic Range" is the difference between the maximum level and the minimum level of sounds. Sounds on a movie originally designed for movie theaters feature a very wide dynamic range, so sometimes it is not suitable for home use. [. . . ] The subtitle function can be used to select the language of your choice. l Closed Caption Closed Caption (CC) is a standardized method of encoding text into an NTSC television signal. A TV can display the text with a built-in decoder or by a separate decoder. All TVs larger than 13 inches sold in the US since 1993 have Closed Caption decoders. [. . . ]