User manual SHARP CP-USB50 DATASHEET

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP CP-USB50. We hope that this SHARP CP-USB50 user guide will be useful to you.


SHARP CP-USB50 DATASHEET: Download the complete user guide (485 Ko)

You may also download the following manuals related to this product:

   SHARP CP-USB50 QUICK START GUIDE (711 ko)

Manual abstract: user guide SHARP CP-USB50DATASHEET

Detailed instructions for use are in the User's Guide.

[. . . ] 16-17 Important Introduction 3 , , Preparation , , Useful Features Advanced Playback . . 34 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 01/4/4 88UK_1. fm -Contents- Special Notes , , Warnings z The supplied AC adaptor contains no user serviceable parts. It contains dangerous voltages, always remove mains plug from the main outlet socket before any service operation or when not in use for a long period. z The AC adaptor supplied with the CP-USB50H must not be used with other equipment. [. . . ] button to adjust the re- To interrupt recording Press the PLAY/PAUSE button whilst recording. The track number will be increased by one each time you interrupt recording. To write recorded contents on the MiniDisc Press the /:OFF button whilst in the stop mode. Level meter indicator Adjust the recording level so that the maximum sound volume from the source makes the reading swing between -4 dB and 0 dB. 5 6 Press the MODE/CHRG button repeatedly to select the recording mode (page 20). Press the PLAY/PAUSE button. Recording will start. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 01/4/4 88UK_4. fm Useful Features Press the /:OFF button. 27 -Recording from a Microphone- To stop recording Recording from a Microphone (continued) , , Sound-actuated recording (Mic Synchronised recording) About pause function The unit automatically pauses when the microphone does not pick up any sound for 3 seconds or more. (Pause function does not work for approximately 10 seconds after a recording starts. ) When the microphone picks up sound again, recording starts automatically. Notes: z Whilst making a mic recording, do not connect anything to the OPTICAL/LINE IN socket on the portable MD. - When a plug-in-power type microphone is plugged in, the portable MD will provide power for the microphone's operation. - If a different type of microphone is plugged in, it may not operate properly or it may cause the unit to malfunction. z Use a microphone with a 3. 5 mm (1/8") diameter stereo mini plug. z If the unit starts recording too often from low unwanted noises, set the microphone input to "MIC SYNC L". z Recording sensitivity can be changed whilst recording. -Recording from a Microphone- 1 2 Press the REC button. button to adjust the re- Useful Features Level meter indicator 3 4 Press the MODE/CHRG button repeatedly to select the recording mode (page 20). Insert the rechargeable battery or alkaline battery from the (+) marked side. Use a commercially available LR6, "AA" size alkaline battery. Useful Features Notes: z Setting the volume level to "0" whilst recording with the rechargeable or an alkaline battery reduces the battery drain. (The battery drains gradually even when the power is turned off. ) z This unit can be used with the AC adaptor when the rechargeable or an alkaline battery is in the unit. Caution: Do not use a nickel-cadmium battery. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 33 01/4/4 88UK_4. fm -Battery Power- Hold Function The present operation condition can be kept even if other buttons are accidentally pressed in a place such as a crowded train. Useful Features -Hold FunctionIf the battery is inserted or the AC adaptor is connected, you can set this function even when the power is turned off. To cancel the hold mode Press and hold down the HOLD button for 2 seconds or more whilst the unit is in the hold mode. "HOLD OFF" will be shown. If the hold function is active whilst the power is turned off, the power cannot be turned on by mistake and the battery will not be drained. 34 Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) 01/4/4 88UK_4. fm Changing Default Settings Whilst in the stop mode . . . , , Beep sound , , Auto play 1 With a MiniDisc inserted, press the MODE/ CHRG button for 2 seconds or more. "SET UP" will appear. When you release the button, "BEEP ON" or "BEEP OFF" will appear. You can eliminate the confirmation sound that beeps when you press a button. You can make the unit not play automatically when you insert a playback-only MiniDisc or an accidental erasure protected MiniDisc. Advanced Features 2 3 4 Press the menu. or button to display the , , Auto power save Press the MODE/CHRG button to switch items. Press the /:OFF button. When the unit is used in a place exposed to much vibration, sound skipping can be decreased by cancelling the auto power save function. (Battery will drain faster. ) What is auto power save function? During playback, maximum 40 seconds (in stereo) of musical information is stored. Auto power save function automatically adjusts the storage time between 5 and 40 seconds to reduce the power consumption. (It cannot be adjusted even if it is operated on the battery charger. ) The storage time varies depending on the playback mode. MENU SETTING ITEM Beep Silent Setting Cancelled Setting Cancelled Setting keep Cancelled BEEP ON BEEP ON* (Confirmation sound) BEEP OFF A-PLAY ON (Auto play) AUTO Psave (Auto power save) D. L MODE 1 (Digital recording level) A-PLAY ON* A-PLAY OFF AUTO Psave* Psave OFF D. L MODE 1* D. L MODE 2 , , Digital recording level (*) indicates default setting. "D. L MODE 1" The digital recording level you set will be kept even after cancelling recording. [. . . ] Plug the AC adaptor back into the wall socket and reoperate the unit. , , Cleaning When the unit becomes dirty Clean it with a soft cloth. When the unit is excessively dirty, use a soft cloth dampened in water (external surfaces only). , , Moisture condensation When the unit has condensation inside, the disc signals cannot be read, and the unit may not function properly. z When the unit is placed in a room where there is excessive steam or moisture. z When the unit is moved from a cool place to a warm place. Clean the plugs and the connecting sockets. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP CP-USB50




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP CP-USB50 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.