User manual SHARP CMS-R160CDH/CDG

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP CMS-R160CDH/CDG. We hope that this SHARP CMS-R160CDH/CDG user guide will be useful to you.


SHARP CMS-R160CDH/CDG : Download the complete user guide (697 Ko)

You may also download the following manuals related to this product:

   SHARP CMS-R160CDH/CDG (783 ko)
   SHARP CMS-R160CDH/CDG (751 ko)
   SHARP CMS-R160CDH/CDG (792 ko)
   SHARP CMS-R160CDH/CDG (4247 ko)
   SHARP CMS-R160CDH/CDG (724 ko)
   SHARP CMS-R160CDH/CDG annexe 1 (4247 ko)
   SHARP CMS-R160CDH/CDG annexe 1 (4247 ko)
   SHARP CMS-R160CDH/CDG annexe 1 (4247 ko)
   SHARP CMS-R160CDH/CDG annexe 1 (797 ko)
   SHARP CMS-R160CDH/CDG annexe 1 (4247 ko)
   SHARP CMS-R160CDH/CDG annexe 1 (4247 ko)
   SHARP CMS-R160CDH/CDG OPERATION MANUALDEFRESSEITNL (4247 ko)

Manual abstract: user guide SHARP CMS-R160CDH/CDG

Detailed instructions for use are in the User's Guide.

[. . . ] CD-BA250H/CD-BA2600H mini systeem bestaande uit CD-BA250H/CD-BA2600H (hoofdtoestel) en CP-BA250H/CP-BA2600H (luidsprekersysteem). CD-BA250H/CD-BA2600H Mini Component System consisting of CD-BA250H/CDBA2600H (main unit) and CP-BA250H/CP-BA2600H (speaker system). CD-BA250H CD-BA2600H BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUAL DE MANEJO BRUKSANVISNING MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING OPERATION MANUAL DEUTSCH FRANÇAIS ESPAÑOL SVENSKA ITALIANO NEDERLANDS ENGLISH Siehe Seiten i bis v und D-1 bis D-35. Please refer to pages i to v and E-1 to E-35. BESONDERE ANMERKUNGEN REMARQUES SPÉCIALES NOTAS ESPECIALES SÄRSKILDA ANMÄRKNINGAR NOTE PARTICOLARI BIJZONDERE OPMERKINGEN SPECIAL NOTES q Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/ EWG und 73/23/EWG mit Änderung 93/68/EWG. q Ce matériel répond aux exigences contenues dans les directives 89/336/ CEE et 73/23/CEE modifiées par la directive 93/68/CEE. [. . . ] If the power fails whilst the tray is open, wait until the power is restored. If the disc tray is stopped forcibly, "ER-CD10" will appear in the display and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. z If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped. Notes: z Normal playback will resume when the PRESET or PRESET button is released. z When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. z The / or / button on the remote control allows you to locate the desired portion. ENGLISH E-13 CD Playback Notes: - Listening to a CD (CDs) - z Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will automatically start playback. z When the last track on the third disc has finished playing, the CD player will stop automatically. z When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played. To restart the track being played: Press the PRESET Starting Playback with a Desired Track You can play a disc starting with the desired track. Repeat or Random Play , , Repeat Play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. - Starting Playback with a Desired Track / Repeat or Random Play - 1 To repeat all tracks on up to 3 discs: Press the / ( ) button twice. Whilst in the stop mode, press one of the 1 - 3 buttons on the remote control or DISC SKIP button to select the desired disc. Selected disc number To repeat a desired track: Perform steps 1 - 4 in the "Programmed Play" section and then press the button twice. (Preset tuning) , , To recall a memorised station Press the PRESET or PRESET 0. 5 seconds to select the desired station. button for less than 1 2 Perform the steps 1 - 3 in "Listening to the Radio" on page 16. Press the MEMORY/SET button to enter the preset tuning saving mode. 3 Within 30 seconds, press the PRESET button to select the preset channel number. or PRESET , , To scan the preset stations The stations saved in memory can be scanned automatically. (Preset memory scan) 1 Store the stations in memory, in order, starting with preset channel 1. Press the PRESET than 0. 5 seconds. or PRESET button for more 4 Within 30 seconds, press the MEMORY/SET button to store that station in memory. z The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each. z This can be operated by pressing the PRESET ( or ) button on the remote control. 2 Press the PRESET or the desired station is located. PRESET button again when , , To erase entire preset memory If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the operation from step 2. 1 2 5 Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in memory, the station previously memorised will be erased. Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the TUNER (BAND) button and the X-BASS/DEMO button, press the ON/STAND-BY button until "TUNER CL" appears. Note: The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead disconnection. Listening to the Radio (See page 16. ) ENGLISH E-17 - Listening to the Memorised Station - Preset channel Frequency and frequency band This can be operated by pressing the PRESET ( or ) button on the remote control. Radio Using the Radio Data System (RDS) RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sports or music, etc. When tuned to an RDS station, "RDS" and the station name will be displayed. "TP" (Traffic Programme) will appear on the display when the received broadcast carries traffic information, and "TA" (Traffic Announcement) will appear whilst a traffic information is on air (see page 24). [. . . ] z Be sure your headphones have a 3. 5 mm (1/8") diameter plug and are between 16 ohms and 50 ohms impedance. Adjust the volume using the VOLUME buttons. E-32 ENGLISH Troubleshooting Chart Many potential "problems" can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. , , Cassette deck Symptom z Cannot record. z If a power failure occurs during playback, the heads remain engaged with the tape. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP CMS-R160CDH/CDG




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP CMS-R160CDH/CDG will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.