User manual SHARP CDDP2400E OPERATION MANUAL

[. . . ] MINI COMPONENT SYSTEM MODEL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. CD-DP2400E Mini Component System consisting of CD-DP2400E (main unit), CP-DP2400E (front speakers), GBOXS0107AWM1 (centre speaker) and GBOXS0108AWM1 (surround speakers). CD-DP2400E OPERATION MANUAL If you require any advice or assistance regarding your Sharp product, please visit our web-site www. sharp. co. uk/support. Customers without Internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). 0101 CD-DP2400E Special notes WARNINGS NOTES FOR USERS IN THE U. K. [. . . ] " Be sure to place an 8 cm (3") CD(s) in the middle of the disc positions. 5 Press the OPEN/CLOSE button to close the disc tray. Music schedule Total number of tracks on the CD whose number is flashing Total playing time of the CD whose number is flashing The music schedule will display only the number of tracks on the disc. If the CD contains more than 15 tracks, " " will appear. 6 To select the CD you want to listen to first, press one of the DISC1 - DISC-3 buttons. Continued to the next page 01/7/17 CD-DP2400E_2. fm CD Playback 12 cm (5") 8 cm (3") 15 - Listening to a CD (CDs) - CD-DP2400E Listening to a CD (CDs) (continued) 7 Press the / ( ) button to start playback. !To locate the beginning of a track To move to the beginning of the next track: Press the button for less than 0. 5 seconds during playback. " You can skip to any track by pressing the button repeatedly until the desired track number appears. " Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will automatically start playback. " When the last track on the third disc finishes playing, the CD player will stop automatically. " When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played. To restart the track being played: Press the button for less than 0. 5 seconds during playback. " You can skip to any track by pressing the button repeatedly until the desired track number appears. - Listening to a CD (CDs) - CD Playback To interrupt playback: Press the CD button on the remote control. To resume playback from the same point, press the button. Notes: " You can locate the beginning of a track on a single disc only. " The / or / button on the remote control allows you to locate the beginning of a track. To stop playback: Press the (CD ) button. !To locate the desired portion For audible fast forward: Press and hold down the button during playback. To remove the CDs: Whilst in the stop mode, press the OPEN/CLOSE button. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc. After use: Press the ON/STAND-BY button to enter the power stand-by mode. For audible fast reverse: Press and hold down the button during playback. Caution: " " " " " Do not place two CDs in one disc tray. If the power fails whilst the tray is open, wait until the power is restored. If the disc tray is stopped forcibly, "ERR 0203" will appear in the display and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. " If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. " If a disc is damaged, dirty, or loaded upside down, it will be skipped. Notes: " Normal playback will resume when the or button is released. " When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. " The / or / button on the remote control allows you to locate the desired portion. 16 01/7/17 CD-DP2400E_2. fm Repeat or random play !Starting Playback with a Desired Track You can play a disc starting with the desired track. CD-DP2400E !Repeat play All tracks on up to 3 discs, or a programmed sequence can be continuously repeated. 1 To repeat all tracks on up to 3 discs: Whilst in the stop mode, press one of the DISC-1 - DISC-3 buttons or DISC SKIP button to select the desired disc. Selected disc number Press the / ( ) button twice. To repeat a desired track: Perform steps 1 - 4 in "Programmed play" on page 18 and then press the button twice. [. . . ] Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with a commercial head/pinch roller cleaner or isopropyl alcohol. When cleaning the heads, pinch rollers, etc. , unplug the unit which contains high voltages. A B C TAPE 1 Note: - Troubleshooting chart / Maintenance - If neither operation above restores the unit, clear all the memory by resetting it. D E B C TAPE 2 " Clearing all the memory (reset) 1 2 Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the / button and the X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears. [. . . ]