User manual SHARP CD-CH1500W

[. . . ] To obtain the best performance from this product, please read this manual carefully. " Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. [. . . ] " The hour will not advance even if minutes advance from "59" to "00". This system can play audio CD-R and CD-RW discs just as CD discs, but cannot perform recording. Note: The system will search CD trays until it finds a CD and will not search the rest of trays. To play discs in turn (from Disc 1 to Disc 6) 1 Press the ON/STAND-BY button to turn the power on. " Be sure to place 8 cm (3") CD in the middle of the disc trays. After that disc finishes playing, the next disc will automatically start playback. " When there is no CD in one of the disc tray 1 - 6 positions, that position will be skipped and the next CD will be played. " When the last track on the DISC 6 has finished playing, the CD player will stop automatically. To move to the beginning of the next track: Turn the jog dial slowly clockwise by one position during playback. To exchange other CDs whilst playing a disc: Press the button for the stopped disc and exchange discs. To remove the CDs: Whilst in the stop mode, press the desired " You can skip to any track by turning the jog dial until the desired track number appears. To restart the track being played: Turn the jog dial slowly anti-clockwise by one position during playback. After use: Press the ON/STAND-BY button to enter the power stand-by mode. " If the power fails whilst the tray is open, wait until the power is restored. " If the disc tray is stopped forcibly, "E-CD20" will appear in the display and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. " If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. " If a disc is damaged, dirty, or loaded upside down, the disc will be skipped. " You can skip to any track by turning the jog dial until the desired track number appears. Notes: " You can locate the beginning of a track on a single disc only. " The or button on the remote control allows you to locate the beginning of a track. For audible fast forward: Press and hold down the button during playback. [. . . ] " If a power failure occurs during playback, the heads remain engaged with the tape. " When a button is pressed, the " Set this unit to the power stand-by mode and then turn it back on. " Playback sounds are skipped, or stopped in the middle of a track. Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc. [. . . ]