User manual SHARP BD-AMS20S

[. . . ] MODEL BD-AMS10S BD-AMS20S BLU-RAY DISC/DVD PLAYER OPERATION MANUAL BD-AMS20S only BD-AMS20S only OPERATION MANUAL ENGLISH Introduction SAFETY / IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. AS THE LASER BEAM USED IN THIS PLAYER IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET. To ensure continued safety do not remove any cover or attempt to gain access to the inside of the product. [. . . ] As this player is not intended to be compliant with AACS, such discs cannot be played back. (AACS: Advanced Access Content System) 2 Press a/b/c/d to select the desired title, then press ENTER to start playback. • If you want to select additional titles, switch pages by pressing f or g. • You can playback by pressing a instead of pressing ENTER. 2 3 Press c to stop playback. NOTE • The Title List screen also can be displayed by pressing TOP MENU/TITLE LIST when playback is stopped. A Select Thumbnail B C Exit Functions 3 1 Information of selected title 2 Title Name Recording Date Recording Duration 3 Button Guide 30 Video/Picture/Music Playback Playback by selecting a chapter 1 Press B (Green) while the Thumbnail screen is displayed. • The chapter screen is displayed. CHAPTER 1 CHAPTER 4 CHAPTER 2 CHAPTER 5 CHAPTER 3 CHAPTER 6 Playback by selecting a Playlist 1 Press C (Yellow) while the Title List screen is displayed. • The Playlist screen is displayed. Program 1 Program 4 Select A Title Name B Enter By Chapter Return C Original Exit D Functions Program 2 Program 3 Playback from the beginning or resume playback When you play back the title from the Title List after you stopped playback, you can select playback from the beginning or from the point where it was last stopped. 1 Press D (Blue) when the desired title is selected while the Title List screen is displayed. 2 Press a/b to select the type of Playback, then press ENTER to start playback. • The type of Playback may be selected from “From Beginning” or “From Continued”. • If you want to select additional chapters, switch pages by pressing f or g. • To return to the Thumbnail screen, press B (Green). 3 Press c to stop playback. 2 Press a/b/c/d to select the desired chapter, then press ENTER to start playback. • You can playback by pressing a instead of pressing ENTER. 2 Press a/b/c/d to select the desired title, then 3 press ENTER to start playback. Playback 3 Press c to stop playback. Sorting the titles Each time you press B (Green) while the Title Name screen is displayed, the Title Name display changes between displaying the newest title first and the oldest title first. 31 Video/Picture/Music Playback Playback using a USB device You can play back video, music and picture data stored in a USB device, including a USB HDD and a USB memory device. Searching/sorting the titles Searching by title name Searching by date 1 Repeat step 1–4 in Searching by title name. 2 Press a/b to select “By Date”, then press ENTER. • The screen for searching by date is displayed. By Date From To Day Day Month Month Start Search Year Year 1 Insert a USB device* to the USB1 or USB2 terminal. • YouTube/DLNA content cannot be recorded to the USB device. • Regarding playback of a music or picture file, see pages 35–36. • To play back a file or content downloaded from a streaming service, see page 59. * When you insert or remove a USB device, be sure to turn off the main power of this player and the USB device (only if connecting a USB HDD) and make sure that “Quick Start” is set to “No” (See page 47). 2 Press c/d to select Video/Music/Picture, then 3 press b or ENTER. Press c/d to select the desired USB terminal (“USB-1” or “USB-2”), then press b or ENTER. • The Title List screen is displayed. Folder 1 USB Memory Device/Picture/ 3 Enter the desired period of dates to search. 4 Once you enter all the required characters, select “Start Search” to start searching. • The search result will be displayed. • If you cancel the search result and return to the Title List screen, press A (Red). 1 Folder 1 2 Folder 2 3 Folder 3 4 Folder 4 Sorting the titles 1 Repeat step 1–4 in Searching by title name. 3 Press a/b to select the desired sorting type 1/All 4 files and folders NOTE • Depending on the format, some files cannot be played back. • To initialise data stored in a USB device or delete BDLIVE data, refer to “USB (HDD/Memory) Management” on page 54. (“From New”, “From Old” or “Titles”), then press ENTER. • The titles will be displayed according to the selected sorting type. 4 Press A (Red). • The selection screen for searching/sorting is displayed. NOTE • When you sort titles by a sorting type, the type will be applied and the titles will be displayed according to the selected sorting type until you change the sorting type. 5 Press a/b to select “By Title Name”, then 6 press ENTER. Enter characters to search using the screen for inputting characters. • For details on the screen for inputting characters, see page 53. 7 Searching starts when all required characters have been entered. • The search result will be displayed. • To cancel the search result and return to the Title List screen, press A (Red). 32 Video/Picture/Music Playback Selecting/deleting files You can select multiple files on the Title List screen to delete or copy all at once. 1 When the Title List screen is displayed, press a/b to select the desired file or folder, then press B (Green). • A check mark is displayed next to the selected file or folder. • The number of selected files and the total file size are displayed at the left of the screen. Folder 1 USB Memory Device/Picture/ 1 File 16MBytes Copying files/folders You can copy file(s) or folder(s) stored in a USB device onto another USB device. 1 When the file(s)/folder(s) are selected at the Title List screen, press D (Blue). 2 Press a/b to select the destination to copy (“USB1” or “USB2”), then press ENTER. • The selection screen for the destination to copy is displayed. NOTE • Only files that are not copy-protected can be copied. [. . . ] Acknowledgements The following open source software components are included in this product: • LibPThread • Librt • libsoup • Libstdc++ • libxml2 • OpenSSL • pango • swfdec • Webkit • zlib • linux kernel • uClibc • modutils • NanoXML • org. apache. oro. text. regex • libsysfs • mtd/jffs2 • ncurses • libiconv • libusb • busybox • bash • libmpeg2 • libjpeg • FontConfig • ntfs-3g Software License Notice Software License Notice Requirements The software components incorporated into this product include components whose copyright holders require license notices. OpenSSL License This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www. openssl. org) Original SSLeay License This product includes cryptographic software written by Eric Young (eay@cryptsoft. com). BSD License This product includes software developed by the University of California, Berkeley and its contributors. 73 Appendix End of Life Disposal A. [. . . ]