User manual SHARP AY-XPM9CR

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AY-XPM9CR. We hope that this SHARP AY-XPM9CR user guide will be useful to you.


SHARP AY-XPM9CR : Download the complete user guide (9869 Ko)

You may also download the following manuals related to this product:

   SHARP AY-XPM9CR (1294 ko)
   SHARP AY-XPM9CR (1282 ko)
   SHARP AY-XPM9CR (1288 ko)
   SHARP AY-XPM9CR (1285 ko)
   SHARP AY-XPM9CR (1287 ko)
   SHARP AY-XPM9CR (1282 ko)
   SHARP AY-XPM9CR (1277 ko)

Manual abstract: user guide SHARP AY-XPM9CR

Detailed instructions for use are in the User's Guide.

[. . . ] Pulling and misuse of the power supply cord can result in damage to the unit and cause electrical shock. Be careful not to expose your body directly to the outlet air for a long time. When using the air conditioner for infants, children, elderly, bedridden, or disabled people make sure the room temperature is suitable for those in the room. Inserting objects can result in injury due to the high speed rotation of internal fans. [. . . ] This air conditioner is a multi-type, and two (or three) indoor units are connected to one outdoor unit. When the setting mode differs among indoor unit(s), the indoor unit(s) operated later may not work. ⷠWhen the indoor unit(s) is/are operating in HEAT mode, the remaining unit(s) can not operate in COOL or DRY mode. ⷠWhen the indoor unit(s) is/are operating in COOL or DRY mode, the remaining unit(s) can not operate in HEAT mode. When the mode of the indoor unit(s) later operated is/are different from those which is/are in operation, 4 seconds later, a long BEEP will be emitted and the temperature indicator on the indicator panel will indicate" " and the OPERATION lamp and TIMER lamp will blink alternately. In such case, change the remote control's mode and send the same mode signal which the other indoor unit(s) is/are operating in. In the AUTO mode, the temperature setting and mode are automatically selected according to the room temperature and outdoor temperature when the unit is turned on. The indicator panel will change each time you press the DISPLAY button in the following manner. When the room temperature or the outdoor temperature is displayed, the POWER MONITOR will light up in 4 levels for COOL and HEAT modes (3 levels for DRY mode), to indicate the operation power. When the air conditioner is operating at maximum power in the COOL and HEAT modes, "POWER" will light and "ECO" will turn off on the indicator panel. The displayed temperatures are rough estimates and may vary from the actual temperatures. ⷠTemperature display ranges Room temperature: 0°C ~ 40°C ( is displayed when less than 0°C and when higher than 40°C) Outdoor temperature: -9°C ~ 45°C ( is displayed when less than -9°C and when higher than 45°C) · Is displayed during the first 120 seconds of operation while the temperatures are being detected. (Temperature detection may more than 120seconds when other unit(s) is/are already being operated. ) · Is displayed for 5 seconds when the unit is not in operation. During operation, if the outdoor temperature changes, the temperature settings will automatically slide as shown in the chart. ⷠMode of the unit operated first will have priority over other unit(s) without reference to the chart. The adjusted position will be memorized and will be automatically set to the same position when operated the next time. The adjustment range is narrower the SWING range in order to prevent condensation from dripping. Manual adjustment of the vertical adjustment louvre can cause the unit to malfunction when the remote control is used for the adjustment. ⷠWhen the vertical adjustment louvre is positioned at the lowest position in the COOL or DRY mode for an extended period of time, condensation may result. Do not adjust the horizontal adjustment louvre extremely to the right or left when operating the air conditioner with fan speed "SOFT" for an extended period of time. In this operation, the air conditioner works at maximum power to makes the room cool or warm so rapidly that you can use it just after you come home. [. . . ] In the COOL and DRY operation, water vapour can sometimes be seen at the air outlet due to the difference between the room air temperature and the air discharged by the unit. ⷠIn the HEAT operation, water vapour may flow out of the outdoor unit during de-icing. After stopping the operation, the outdoor unit will rotate its' fan for about a minute to cool down the unit. Carpet and furniture odors that entered into the unit and the air conditioner's inner component odors at the early stage of installation may be sent out from the unit. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AY-XPM9CR




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AY-XPM9CR will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.