User manual SHARP AY-X10BE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual SHARP AY-X10BE. We hope that this SHARP AY-X10BE user guide will be useful to you.


SHARP AY-X10BE : Download the complete user guide (5983 Ko)

You may also download the following manuals related to this product:

   SHARP AY-X10BE (807 ko)
   SHARP AY-X10BE (827 ko)
   SHARP AY-X10BE (801 ko)
   SHARP AY-X10BE (801 ko)
   SHARP AY-X10BE (827 ko)
   SHARP AY-X10BE (808 ko)

Manual abstract: user guide SHARP AY-X10BE

Detailed instructions for use are in the User's Guide.

[. . . ] 3 For safety, turn the circuit breaker off when not using the unit for an extended period of time. 4 Check the outdoor unit mounting rack periodically for wear and to make sure it is firmly in place. Put anything on 5 Do notor drop, causing the outdoor unit nor step on it. Other applications such as in a kennel or to raise animals grow on the unit. [. . . ] ⷠIf you will not be using the unit for a long time, remove the batteries from the remote control. Point the remote control towards the unit's signal receiver window and press the desired button. ⷠMake sure there is no curtain or other object between the remote control and the unit. ⷠThe remote control can send signals from up to 7 metres away. Do not allow the signal receiver window to receive strong direct sunlight, since it can adversely affect its operation. If the signal receiver window is exposed to direct sunlight, close a curtain to block the light. ⷠUsing a fluorescent lamp with a quick starter in the same room may interfere with transmission of the signal. The unit can be affected by signals transmitted from the remote control of a television, VCR or other equipment used in the same room. ⷠDo not leave the remote control in direct sunlight or near a heater. Also, protect the unit and remote control from moisture and shock which can discolour or damage them. Example: 5 o'clock in the afternoon 1 To set to the 12-hour mode, press the CLOCK button once in the first step. 3 1 To set to the 24-hour mode, press the CLOCK button twice in the first step. (The heat mode symbol is provided only on models AYX08BE/AY-X10BE/AY-X13BE) The current time cannot be set when the timer is operating. In the AUTO and DRY 1°C higher mode, the indicator 1°C lower bars represent 2°C lower changes in temperature. ⷠIn the COOL (and HEAT for AY-X08BE/AYX10BE/AY-X13BE) mode, the temperature can be set within the range of 18 to 32 °C · (The heat mode symbol is provided only on models AYX08BE/AY-X10BE/AY-X13BE) In the DRY mode, the fan speed is preset to AUTO and cannot be changed. In the AUTO mode, the temperature setting and mode are automatically selected according to the room temperature and outdoor temperature when the unit is turned on. During operation, if the outdoor temperature changes, the temperature settings will automatically slide as shown in the chart. MODE CHANGEOVER (only for models AY-X08BE/AY-X10BE/AY-X13BE) During seasons when you need COOLING at daytime and HEATING at night, or if the room temperature should become extremely higher than the temperature setting, due to supplementary heating equipment, the mode will automatically switch between HEAT and COOL mode to keep the comfortable room temperature. The indicator panel will change each time you press the DISPLAY button in the following manner. When the room temperature or the outdoor temperature is displayed, the POWER MONITOR will light up in 4 levels (3 levels for DRY mode), to indicate the operation power. When the air conditioner is operating at maximum power in the COOL (and HEAT for AYX08BE/AY-X10BE/AY-X13BE)mode, "Power" will light and "Eco" will turn off on the indicator panel. The displayed temperatures are rough estimates and may vary from the actual temperatures. [. . . ] This sound is generated by the friction of the front panel and other components expanding or connecting due to a temperature change. After stopping the operation, the outdoor unit will rotate its' fan for about a minute to cool down the unit. If the unit appears to be malfunctioning, check the following points before calling for service. Check the outdoor unit to make sure nothing is blocking the air inlet or outlet. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SHARP AY-X10BE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SHARP AY-X10BE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.