User manual SHARP AR-S11

[. . . ] When installed on an AR-C260 Series machine, sets of up to 20 full-colour copies can be made in sort mode. PART NAMES Sorter release button (See page 6) Sort bins Copies are delivered to these bins. If a misfeed occurs in the 20-bin sorter, press this button to open the space between the sorter and the machine. CAUTIONS G Do not put pressure on the sorter or subject it to undue force (particularly the sort bins). [. . . ] The copies are output face down. Original Original 5 sets of copies (The copies are output face down in each bin. ) 5 copies per page (The copies are output face down in each bin. ) I Non sort mode All copies are delivered to the top bin (unsorted). Plain paper and Heavy Paper 1 (paper weight: 106 to 200 g/m2 or 28+ to 54 lbs. ) are output face down. NOTE Output to the 20-bin sorter in sort mode and group mode is only possible when the machine is in Copy mode. 3 SELECTING THE MODE OF THE 20-BIN SORTER To have copies delivered to the 20-bin sorter, follow the steps below to switch the output location to the sorter and select the desired sorter mode (NON SORT, SORT, or GROUP). 1 Touch the [OUTPUT] key in the main screen. READY TO COPY. INTERRUPT 2 Touch the [SORTER] key. 0 AUTO EXPOSURE AUTO A4 PAPER SELECT 100% COPY RATIO READY TO COPY. INTERRUPT 0 OK OUTPUT SPECIAL MODES OFFSET SORTER CENTRE TRAY 2-SIDED COPY A4 B5 SORT OUTPUT DUPLEX A4 A3 GROUP 3 Touch the key of the desired sorter mode ( , , or ). OUTPUT NON SORT SORTER CENTRE TRAY OK SORT GROUP [GROUP] key This key selects group mode. One set of copies grouped by original page is output to each sorter bin. The key is highlighted when the sorter is selected. [CENTRE TRAY] key This key switches the output location to the centre tray. [OK] key This key closes the output setting screen and returns you to the main screen. * When key , , or is touched to select the sorter mode, the entire key of the selected mode is highlighted. (When the sorter mode is selected automatically, the icon above the key is highlighted. ) 4 USING THE 20-BIN SORTER the document feeder 1 Place the original inreversing automatic tray (when a document feeder is installed) or on the document glass. (Refer to page 4-6 of "Operation manual (for general information and copier operation)". ) 5 Touch mode. READY TO COPY. the key for the desired output The touched key is highlighted to indicate that the function is enabled. OUTPUT NON SORT SORTER SORT GROUP If the original was placed on the document glass in step 1, non-sort mode is automatically selected. If the original was placed in the document feeder tray, sort mode is automatically selected. needed, including 2 Select copy settings as copy mode, paper two-sided or one-sided size select, exposure adjustment, and copy ratio. (Refer to chapter 5 of "Operation manual (for general information and copier operation)". ) 6 Touch the [OK] key. INTERRUPT 0 OK CENTRE TRAY 3 Touch the [OUTPUT] key. 2-SIDED COPY as needed 7 Set the number of copies START ( and press the [COLOUR COPY )] or [BLACK COPY START ( )] key. Replace the original with the next original and press the [START] key. [. . . ] This program allows you to override the capacity limit and allow copying to continue. Caution should be exercised when enabling this program, as misfeeds, a machine failure, or copies overflowing from bins may result. [. . . ]