User manual SHARP AR-BC260

[. . . ] The socket-outlet shall be installed near the equipment and shall be easily accessible. To protect against loss or theft, record and retain for reference the machine’s serial number located on the back of the unit. Model Number Serial Number Date of Purchase Place of Purchase Authorized Sharp Copier/Printer Service Department Number AR-BC260 Warranty While every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation makes no warranty of any kind with regard to its content. SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual. © Copyright SHARP Corporation 2004. [. . . ] Document feeder tray Document glass 4 Top Bottom Bottom Top I Automatic copy image rotation - rotation copying If the orientation of the originals and copy paper are different, the original image will be automatically rotated 90° and copied. (When an image is rotated, a message will be displayed. ) If a function is selected that is not suitable for rotation, such as enlarging the copy to greater than 8-1/2" x 11" (A4) size or staple sorting with the saddle stitch finisher, rotation will not be possible. [Example] Orientation of original Orientation of paper Copy after rotation Face down Face down GThis function operates in both the auto paper select or auto image mode. See page 15 of the key operator's guide. ) 4-7 ApollonII_general-copy_SEC. book 8 ページ ２００４年９月６日　月曜日　午後４時５７分 SELECTING THE ORIGINAL SIZE When the correct original size is not detected or the original size is not displayed, you can manually specify the original size. By causing the machine to recognize the original size, you can have the automatic ratio selection function (page 512) automatically set a suitable enlargement or reduction ratio for the selected paper size. Place the original in the document feeder tray or on the document glass and then follow the steps below. 1 Touch the [ORIGINAL] key. AUTO ORIGINAL AUTO EXPOSURE 3 Touch the [OK] key. You will return to the initial screen. selected appears 4 Thehalf of theoriginal size key. in the top [ORIGINAL] X 512 Y1018 ORIGINAL AUTO EXPOSURE 2 Enter the original size. If the original size is a standard size, touch the appropriate original size key. 51/2X81/2 51/2X81/2R 8 X11 81/2X11R STANDARD SIZE SIZE INPUT 1 / 2 81/2 X13 81/2 X14 11X17 OK AB INCH [MANUAL] and the original size key you touched are highlighted. If you wish to select an AB size, touch the [AB/INCH] key and then touch the desired original size key. A5 A5R B5 B5R STANDARD SIZE A4 A4R B4 A3 OK AB INCH SIZE INPUT [AB] is highlighted and AB size keys are displayed. To return to the INCH palette, touch the [AB/INCH] key once again. If the original size is a non-standard size, touch the [SIZE INPUT] tab and then enter the X (width) and Y (length) dimensions of the original with the or key. X Y OK X Y 17 11 (2 1/2 17) inch (2 1/2 11 3/4) inch The X dimension (width) is initially selected. Using the document glass 2-1/2" to 17" (64 to 432 mm) 2-1/2" to 11-3/4" (64 to 297 mm) STANDARD SIZE SIZE INPUT X (horizontal direction) Y (vertical direction) Using the reversing single pass feeder 5-3/4" to 17" (143 to 432 mm) 5-1/8" to 11-3/4" (130 to 297 mm) 4-8 ApollonII_general-copy_SEC. book 9 ページ ２００４年９月６日　月曜日　午後４時５７分 STORING, DELETING, AND USING ORIGINAL SIZES Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you copy that size of document. In these cases the copy quantity will be reset to "0". 5 NOTE The 1-sided to 1-sided copying mode is set as the default in the initial settings. If the default setting has not been changed using the "Initial status settings" program (key operator program), steps 3 to 5 on page 5-2 can be omitted. 5-3 sec_apollon_05-1. fm 4 ページ ２００４年９月１６日　木曜日　午前１０時２４分 NORMAL COPYING Copy mode output restrictions No added memory Two-sided copying mode One-sided copying Output mode Color copying Black and white copying Color copying Black and white copying original/paper size Up to 11" x 17" (A3) 12" x 18" (A3W)* Up to 11" x 17" (A3) 12" x 18" (A3W)* Up to 8-1/2" x 11" (A4) 8-1/2" x 14", 11" x 17" (B4, A3) 12" x 18" (A3W)* Up to 11" x 17" (A3) 12" x 18" (A3W)* : Copying not possible Sort Group Memory added (128 MB or 256 MB) Sort Group Automatic two-sided copying : Copying possible using selected settings * The reversing single pass feeder cannot be used to copy 12" x 18" (A3W) size original. Guidelines for the number of scannable originals during sort copying When using sort copy mode, the number of pages shown in the table below will all be scanned into memory and the set number of copies made. The actual number of original pages that can be scanned into memory will vary depending on the content of the originals. ) Output mode Original type Original size Up to 8-1/2" x 11" (A4) 8-1/2" x 14", 11" x 17" (B4, A3) 12" x 18" (A3W) Up to 8-1/2" x 11" (A4) 8-1/2" x 14", 11" x 17" (B4, A3) 12" x 18" (A3W) Up to 8-1/2" x 11" (A4) 8-1/2" x 14", 11" x 17" (B4, A3) 12" x 18" (A3W) Black and white Text original copying Up to 8-1/2" x 11" (A4) 8-1/2" x 14", 11" x 17" (B4, A3) 12" x 18" (A3W) No added memory Added memory 128 MB 256 MB 100 180 50 41 37 18 15 21 10 8 400 200 165 90 74 64 32 26 37 18 15 680 340 280 Full color original (mostly text) Color copying Full color original (text and photos) Full color original (photo) 5-4 sec_apollon_05-1. fm 5 ページ ２００４年９月１４日　火曜日　午前１０時４８分 NORMAL COPYING Copy output (sort and group) Example: Making five sets or five copies each of three originals G Sorting copies into sets Original Press the [BLACK COPY START] key OUTPUT SPECIAL MODES SORT 2-SIDED COPY OUTPUT GROUP Set the number of copies (5) Five sets of copies Touch the [OUTPUT] key Touch the [SORT] key Press the [COLOR COPY START] key "Sort" is automatically selected when the original is placed on the document feeder tray of the reversing single pass feeder. G Grouping copies by page Original Press the [BLACK COPY START] key OUTPUT SPECIAL MODES SORT 2-SIDED COPY 5 5 copies per page Press the [COLOR COPY START] key OUTPUT GROUP Set the number of copies (5) Touch the [OUTPUT] key Touch the [GROUP] key "Group" is automatically selected when the original is placed on the document glass. About the offset function Offset function "ON" Offset function "OFF" This function offsets each set of copies from the previous set in the output tray, making it easy to separate sets of copies. (Offset can function for output to the center tray or in the offset tray of the saddle stitch finisher. ) READY TO COPY. INTERRUPT OFFSET LEFT TRAY CENTER TRAY OK 0 OUTPUT SORT Turning on the offset function The offset function operates when a checkmark appears in the [OFFSET] checkbox, which is displayed by touching the [CENTER TRAY] key. (If a checkmark doesn't appear, touch the checkbox. ) Offset width: Approximately 1-3/10" (30 mm) (12" x 18" (A3W) paper cannot be offset. ) GROUP Selecting the output tray When the [LEFT TRAY] key in the above illustration is highlighted, copies are output to the tray on the left side of the machine (the left tray). When the [CENTER TRAY] key is highlighted, copies are output to the center tray. Touch the key of the tray you wish to use for copy output. 5-5 ApollonII_general-copy_SEC. book 6 ページ ２００４年９月６日　月曜日　午後４時５７分 NORMAL COPYING Automatic two-sided copying from the reversing single pass feeder When a duplex module/2 x 500 sheet paper drawer and a duplex bypass/inverter unit are installed, the following automatic two-sided copy functions are possible. The copy paper is turned over automatically, allowing easy twosided copying. NOTE Certain restrictions exist depending on the amount of memory installed and the copy settings. (See "Copy mode output restrictions" and "Guidelines for the number of scannable originals during sort copying" on page 5-4. ) Original Copy The following two-sided modes can be selected 1. Automatic one-sided copying from two-sided originals G This function can be used even if a duplex module/2 x 500 sheet paper drawer and/or a duplex bypass/ inverter unit are not installed. the originals in the 1 Place(pages 4-6 to 4-9) document feeder tray. Example of a portrait-oriented original Example of a landscape-oriented original 2 Touch the [2-SIDED COPY] key. 2-SIDED COPY OUTPUT 3 Select the desired duplex copy mode. READY TO COPY. SIDED COPY The left screen shows the display when a reversing single pass feeder, a duplex module/ 2 x 500 sheet paper drawer, and a duplex bypass/inverter unit are installed. [. . . ] 1-9 Setting originals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6 Setting the paper size - Bypass tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 - Extra size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Setting the paper type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]