User manual SHARP AR-5127

[. . . ] After confirming the message in the 'Welcome' window, click the 'Next' button. Read the message in the readme window, and then click the 'Next' button. G If the following screen appears (the message may appear more than once), click the 'Continue Anyway' button. 7. When the 'The printer driver installation is complete. ' dialog box appears, click the 'OK' button. NOTE: GAfter the installation, a message to restart your computer may be displayed. [. . . ] The Readme file for the printer driver can be found in the 'English' folder in the CD-ROM. NOTES: GIf you are installing the printer driver for the first time, we recommend that you use the installer rather than the Add Printer Wizard. Click the 'start' button, click 'My Computer' ( ), and then double-click the CD-ROM ( ) icon. G In an operating system other than Windows XP, double-click 'My Computer', and then double-click the CD-ROM icon. Copy the self-extracting file (. exe) in the 'English' folder to any desired folder, and then double-click on the file to extract it. G Use the self-extracting file that corresponds to your operating system as shown below. Operating system Windows 95/98/Me Windows NT 4. 0 Windows 2000/XP Self-extracting file Prn_9xme. exe Prn_nt. exe Prn_2kxp. exe 5. Click the 'start' button, click 'Control Panel', click 'Printers and Other Hardware', and then click 'Printers and Faxes'. G In an operating system other than Windows XP, click the 'Start' button, select 'Settings', and then click 'Printers'. G In an operating system other than Windows XP, double-click the 'Add Printer' icon. G When you are asked to specify the path of the printer driver, select the folder where you extracted the file in step 4. -5- CONNECTING TO A COMPUTER Follow the procedure below to connect the printer to your computer. NOTES: GUSB is available with a PC/AT compatible computer that was originally equipped with USB and had Windows 98, Windows Me, Windows 2000 Professional, Windows XP Professional or Windows XP Home Edition preinstalled. GFor information on interface cables, see "SPECIFICATIONS" in the Operation Manual for the machine. GThe interface connector position of the computer differs depending on computers. Refer to the manual of your computer. Connecting the USB interface cable 1. Insert the cable into the USB interface connector on the printer. 3. Insert the other end of the cable into the interface connector of your computer. Connecting the parallel interface cable 1. Plug the appropriate end of the cable into the interface connector on the printer and secure the clips on the sides of the connector. 4. Plug the other end of the cable into the interface connector of your computer. -6- SETTING PRINTER DRIVER After installing the printer driver and connecting the printer to your computer, use the procedure in this section to set the printer configuration. Click the 'start' button, click 'Control Panel', click 'Printers and Other Hardware', and then click 'Printers and Faxes'. G In an operating system other than Windows XP, click the 'Start' button, select 'Settings', and then click 'Printers'. Right-click the 'SHARP AR-5127' printer driver icon, and click 'Properties' from the shortcut menu. Click the 'Configuration' tab and set the printer configuration based on the options that have been installed. Example:A dual paper tray and an optional Job Separator Kit have been installed. 5. [. . . ] UNDER NO CIRCUMSTANCES INCLUDING NEGLIGENCE, SHALL SHARP BE LIABLE FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OR INABILITY TO USE THE SOFTWARE OR RELATED DOCUMENTATION, EVEN IF SHARP OR A SHARP AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. In no event shall SHARP's total liability to you for all damages, losses, and causes of action (whether in contract, tort (including negligence) or otherwise) exceed the amount paid by you for the Software. For a portion of the Software related with Apple Macintosh and Microsoft Windows, this license shall be governed by and construed in accordance with the laws of the state of California and Washington, respectively. [. . . ]